Valter Carvelli 
- (2023): Phase change materials embedded in expanded clay aggregates to develop energy storage concrete: a review. In: Science and Technology for the Built Environment, v. 29, n. 10 (Oktober 2023).
- (2023): Hysteretic performance of foam-infilled corrugated FRP-steel sandwich shear wall. In: Engineering Structures, v. 294 (November 2023).
- (2019): Ettringite-based binder from ladle slag and gypsum – The effect of citric acid on fresh and hardened state properties. In: Cement and Concrete Research, v. 123 (September 2019).
- (2023): Effects of elevated temperature and water re-curing on the compression behavior of hybrid fiber reinforced concrete. In: Journal of Building Engineering, v. 67 (Mai 2023).
- (2022): Effect of fiber hybridization on mechanical properties of concrete. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): Digital imaging monitoring of fracture processes in hybrid steel fiber reinforced concrete. In: Composite Structures, v. 298 (Oktober 2022).
- (2022): Guide for Strengthening of Concrete Structures. fédération internationale du béton (fib), Lausanne (Schweiz), ISBN 978-2-88394-157-1.
- (2022): High strength fiber reinforced one-part alkali activated slag composites from industrial side streams. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2021): Biaxial tearing properties of woven coated fabrics using digital image correlation. In: Composite Structures, v. 272 (September 2021).
- (2019): Modelling the temperature effects at the interface between GFRP bar and concrete. Vorgetragen bei: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Low velocity impact and CAI of woven carbon fibre reinforced highly polymerized thermoplastic epoxy modified with submicron diameter glass fibres. In: Composite Structures, v. 236 (März 2020).
- (2017): Acoustic emission and damage mode correlation in textile reinforced PPS composites. In: Composite Structures, v. 163 (März 2017).
- (2016): High pressure strength of carbon fibre reinforced vinylester and epoxy vessels. In: Composite Structures, v. 140 (April 2016).
- (2015): Long-term bending performance and service life prediction of pultruded Glass Fibre Reinforced Polymer composites. In: Composite Structures, v. 127 (September 2015).
- (2014): Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites. In: Composite Structures, v. 116 (September 2014).
- (2014): Ageing of pultruded glass fibre reinforced polymer composites exposed to combined environmental agents. In: Composite Structures, v. 108 (Februar 2014).
- (2020): Modelling the bond in GFRP bar reinforced concrete thin structural members. In: Structures, v. 24 (April 2020).
- (2019): Testing masonry blockwork panels for orthotropic shear strength. In: Construction and Building Materials, v. 214 (Juli 2019).
- (2009): Anchor System for Tension Testing of Large Diameter GFRP Bars. In: Journal of Composites for Construction, v. 13, n. 5 (Oktober 2009).
- (2019): Effect of Small Concrete Cover on the Fatigue Behavior of GFRP Bars and Concrete Bond. In: Journal of Composites for Construction, v. 23, n. 2 (April 2019).
- (2013): Pull-out strength of glued-in FRP plates bonded in glulam. In: Construction and Building Materials, v. 43 (Juni 2013).
- (2016): Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Modelling bond of GFRP rebar and concrete. In: Construction and Building Materials, v. 153 (Oktober 2017).
- (2014): Modelling high temperature effects on bridge slabs reinforced with GFRP rebars. In: Engineering Structures, v. 81 (Dezember 2014).
- (2018): Thermo-mechanical response of concrete sandwich panels reinforced with glass fiber reinforced polymer bars. In: Structural Concrete, v. 19, n. 3 (Juni 2018).
Structurae kooperiert mit
