Jean-François Caron 
- (2023): Affordable inline structuration measurements of printable mortar with a pocket shear vane. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): Materialising structural optimisation of reinforced concrete beams through digital fabrication. In: Structures, v. 59 (Januar 2024).
- (2023): On the geometrical origin of the anisotropy in extrusion-based 3d printed structures. In: Engineering Structures, v. 275 (Januar 2023).
- (2021): 3D printing of mortar with continuous fibres: Principle, properties and potential for application. In: Automation in Construction, v. 129 (September 2021).
- (2018): Proposals to make Complex Structures Affordable. Vorgetragen bei: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2018): An innovative Fabrication Process from Rolled Helicoidal Steel Strips. Vorgetragen bei: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2021): Flow-based pultrusion of continuous fibers for cement-based composite material and additive manufacturing: rheological and technological requirements. In: Composite Structures, v. 262 (April 2021).
- (2002): Software application for evaluating interfacial stresses in inelastic symmetrical laminates with free edges. In: Composite Structures, v. 58, n. 2 (November 2002).
- (2006): Prediction of the onset of mode III delamination in carbon-epoxy laminates. In: Composite Structures, v. 72, n. 4 (April 2006).
- (2007): Analytical determination of the modes I, II and III energy release rates in a delaminated laminate and validation of a delamination criterion. In: Composite Structures, v. 78, n. 3 (Mai 2007).
- (2018): Progressive damage of a unidirectional composite with a viscoelastic matrix, observations and modelling. In: Composite Structures, v. 188 (März 2018).
- (2015): Multi-reinforcement of timber beams with composite materials: Experiments and fracture modeling. In: Composite Structures, v. 123 (Mai 2015).
- (2013): Stress analysis of long multilayered plates subjected to invariant loading: Analytical solutions by a layerwise stress model. In: Composite Structures, v. 100 (Juni 2013).
- (2013): Bending analysis of laminated and sandwich plates using a layer-wise stress model. In: Composite Structures, v. 96 (Februar 2013).
- (2013): Cylindrical bending of multilayered plates with multi-delamination via a layerwise stress approach. In: Composite Structures, v. 95 (Januar 2013).
- (2012): Enhanced layerwise model for laminates with imperfect interfaces – Part 1: Equations and theoretical validation. In: Composite Structures, v. 94, n. 5 (April 2012).
- (2012): Enhanced layerwise model for laminates with imperfect interfaces – Part 2: Experimental validation and failure prediction. In: Composite Structures, v. 94, n. 3 (Februar 2012).
- (2011): A layerwise finite element for multilayers with imperfect interfaces. In: Composite Structures, v. 93, n. 12 (November 2011).
- (2009): Selfstressed bowstring footbridge in FRP. In: Composite Structures, v. 89, n. 3 (Juli 2009).
- (2020): Free-form structures from topologically interlocking masonries. In: Automation in Construction, v. 113 (Mai 2020).
- (2006): A new finite element for free edge effect analysis in laminated composites. In: Computers & Structures, v. 84, n. 22-23 (September 2006).
- (2011): Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2015): Isogonal moulding surfaces: A family of shapes for high node congruence in free-form structures. In: Automation in Construction, v. 59 (November 2015).
- (2017): A 4-degree-of-freedom Kirchhoff beam model for the modeling of bending–torsion couplings in active-bending structures. In: International Journal of Space Structures, v. 32, n. 2 (Juni 2017).
- (2009): Gridshell in composite materials. Towards large span shelters. In: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (Oktober 2009).
- (2009): Characterization of FRP-to-concrete bonded interface. Description of the single lap shear test. In: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (Oktober 2009).
- (2018): Fire design of post-installed bonded rebars: Full-scale validation test on a 2.94 × 2 × 0.15 m 3 concrete slab subjected to ISO 834-1 fire. In: Engineering Structures, v. 174 (November 2018).
- (2016): Construction of a Large Composite Gridshell Structure: A Lightweight Structure Made with Pultruded Glass Fibre Reinforced Polymer Tubes. In: Structural Engineering International, v. 26, n. 2 (Mai 2016).
- (2012): Gridshells in Composite Materials: Construction of a 300 m² Forum for the Solidays' Festival in Paris. In: Structural Engineering International, v. 22, n. 3 (August 2012).
Structurae kooperiert mit
