Dongwei Cao
- (2024): Shrinkage, mechanical properties and freeze-thaw resistance of cement mortar containing internal curing materials with different absorption behaviors at low humidity. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Early hydration characteristics and kinetics model of cement pastes containing internal curing materials with different absorption behaviors. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): The development and application of an interfacial cohesive zone model of the pavement interlayer considering the characteristics of adhesive materials. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): pH-Sensitive Microgels with Different Chemical Structures of Internal Curing of Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (Januar 2023).
- (2021): Air pore structure, strength and frost resistance of air-entrained mortar with different dosage of nano-SiO2 hydrosol. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Mechanical properties, drying shrinkage, microstructure of modified cement mortar based on poly(acrylamide-co-methacrylic acid) microgel. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2021): Performance of a dry-method-epoxy modifier and a modified epoxy-asphalt mixture. In: Construction and Building Materials, v. 266 (Januar 2021).
- (2019): Study on cohesion and adhesion of high-viscosity modified asphalt. In: International Journal of Transportation Science and Technology, v. 8, n. 4 (Dezember 2019).
- (2018): Experimental Investigation and Applied Research of Permeable Marking for Porous Asphalt Wearing Course. In: Advances in Civil Engineering Materials, v. 7, n. 1 (Dezember 2018).
- (2019): Study on the antifreeze performance of porous cement stabilized macadam. In: Construction and Building Materials, v. 208 (Mai 2019).
- (2017): Rheological Properties of Modified Coal Tar Pitches. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 3 (März 2017).
- (2009): Research on Material Composition and Performance of Porous Asphalt Pavement. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 4 (April 2009).
- (2012): Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders. In: Construction and Building Materials, v. 35 (Oktober 2012).
- (2013): Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt. In: Construction and Building Materials, v. 47 (Oktober 2013).
- (2016): Pavement stiffness measurements in relation to mechanical impedance. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2016): Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2016): Experimental investigation of preventive maintenance materials of porous asphalt mixture based on high viscosity modified bitumen. In: Construction and Building Materials, v. 124 (Oktober 2016).
- (2017): Development of paving performance index system for selection of modified asphalt binder. In: Construction and Building Materials, v. 153 (Oktober 2017).
- (2017): Experimental study on rheological characteristics and performance of high modulus asphalt binder with different modifiers. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): An investigation on stress distribution effect on multi- piezoelectric energy harvesters. In: Frontiers of Structural and Civil Engineering, v. 11, n. 3 (August 2017).
- (2018): Performance analysis of different type preventive maintenance materials for porous asphalt based on high viscosity modified asphalt. In: Construction and Building Materials, v. 191 (Dezember 2018).
Structurae kooperiert mit
