0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

G. Campione

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Campione, G. / Cannella, F. / Ferrotto, M. (2023): Flexural Behavior for External Beam–Column SFRC Joints: Experimental Investigation and Design Suggestions. In: International Journal of Civil Engineering, v. 22, n. 3 (Oktober 2023).

    https://doi.org/10.1007/s40999-023-00901-w

  2. Di Marco, C. / Frappa, G. / Sabbà, M. F. / Campione, G. / Pauletta, M. (2023): Shear strength formula for interior beam-column joints with plain bars in existing buildings. In: Engineering Structures, v. 293 (Oktober 2023).

    https://doi.org/10.1016/j.engstruct.2023.116656

  3. Campione, G. / Cannella, F. / Zizzo, M. / Pauletta, M. (2021): Buckling strength of steel tube for lifting telescopic wind steel tower. In: Engineering Failure Analysis, v. 121 (März 2021).

    https://doi.org/10.1016/j.engfailanal.2020.105153

  4. Campione, G. / Cannella, F. / Zizzo, M. (2021): Flexural Response of Reinforced Concrete Beam on Elastic Foundation under Vertical Load and Bending Moment: Review of Existing Methods and Proposed New Method. In: Practice Periodical on Structural Design and Construction, v. 26, n. 2 (Mai 2021).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000561

  5. Campione, G. (2011): Compressive behavior of short fibrous reinforced concrete members with square cross-section. In: Structural Engineering and Mechanics, v. 37, n. 6 (März 2011).

    https://doi.org/10.12989/sem.2011.37.6.649

  6. Campione, G. (2008): Analytical model for high-strength concrete columns with square cross-section. In: Structural Engineering and Mechanics, v. 28, n. 3 (Februar 2008).

    https://doi.org/10.12989/sem.2008.28.3.295

  7. Campione, G. / La Mendola, L. / Papia, M. (2006): Shear strength of steel fiber reinforced concrete beams with stirrups. In: Structural Engineering and Mechanics, v. 24, n. 1 (September 2006).

    https://doi.org/10.12989/sem.2006.24.1.107

  8. Campione, G. / Cavaleri, L. / Ferrotto, M. F. / Macaluso, G. / Papia, M. (2016): Efficiency of Stress-Strain Models of Confined Concrete With and Without Steel Jacketing to Reproduce Experimental Results. In: The Open Construction and Building Technology Journal, v. 10, n. 1 (Dezember 2016).

    https://doi.org/10.2174/1874836801610010065

  9. Campione, G. (2019): Effects of Air Tightness Tests on Steel Thin-Wall Box Structures with Circular and Rectangular Cross Sections. In: Practice Periodical on Structural Design and Construction, v. 24, n. 4 (November 2019).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000451

  10. Campione, G. / Scibilia, N. (2002): Beam-column behavior of concrete filled steel tubes. In: Steel and Composite Structures, v. 2, n. 4 (August 2002).

    https://doi.org/10.12989/scs.2002.2.4.259

  11. Campione, G. / Scibilia, N. (2001): Flexural behavior of partially-restrained semirigid steel connections. In: Steel and Composite Structures, v. 1, n. 4 (Dezember 2001).

    https://doi.org/10.12989/scs.2001.1.4.441

  12. Campione, G. / Monaco, A. / Cannella, F. (2019): Flexural Test on a Full-Scale 60-kW Wind Turbine–Tower Telescopic Steel Pipe. In: Practice Periodical on Structural Design and Construction, v. 24, n. 3 (August 2019).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000433

  13. Campione, G. / Cannella, F. / Cavaleri, L. (2017): Shear and flexural strength prediction of corroded R.C. beams. In: Construction and Building Materials, v. 149 (September 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.05.125

  14. Campione, G. / Cucchiara, C. / Minafò, G. (2015): Effects of circular openings on the compressive behaviour of R.C. columns. In: Materials and Structures, v. 48, n. 7 (Juli 2015).

    https://doi.org/10.1617/s11527-014-0288-5

  15. Campione, G. / Cannella, F. / Cavaleri, L. / Ferrotto, M. F. (2017): Moment-axial force domain of corroded R.C. columns. In: Materials and Structures, v. 50, n. 1 (Februar 2017).

    https://doi.org/10.1617/s11527-016-0930-5

  16. Campione, G. / La Mendola, L. / Sanpaolesi, L. / Scibilia, N. / Zingone, G. (2002): Behavior of fiber reinforced concrete-filled tubular columns in compression. In: Materials and Structures, v. 35, n. 6 (Juli 2002).

    https://doi.org/10.1007/bf02483152

  17. Campione, G. / Miraglia, N. / Papia, M. (2001): Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates. In: Materials and Structures, v. 34, n. 4 (Mai 2001).

    https://doi.org/10.1007/bf02480589

  18. Campione, G. / La Mendola, L. / Papia, M. (2005): Flexural behaviour of concrete corbels containing steel fibers or wrapped with FRP sheets. In: Materials and Structures, v. 38, n. 6 (Juli 2005).

    https://doi.org/10.1007/bf02481593

  19. Campione, G. / Fossetti, M. / Giacchino, C. / Minafò, G. (2014): RC columns externally strengthened with RC jackets. In: Materials and Structures, v. 47, n. 10 (Oktober 2014).

    https://doi.org/10.1617/s11527-013-0146-x

  20. Campione, G. / Fossetti, M. / Minafò, G. / Papia, M. (2012): Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns. In: Engineering Structures, v. 34 (Januar 2012).

    https://doi.org/10.1016/j.engstruct.2011.10.002

  21. Campione, G. / Cavaleri, L. / Papia, M. (2015): Flexural response of external R.C. beam–column joints externally strengthened with steel cages. In: Engineering Structures, v. 104 (Dezember 2015).

    https://doi.org/10.1016/j.engstruct.2015.09.009

  22. Campione, G. (2015): Analytical prediction of load deflection curves of external steel fibers R/C beam–column joints under monotonic loading. In: Engineering Structures, v. 83 (Januar 2015).

    https://doi.org/10.1016/j.engstruct.2014.10.047

  23. Campione, G. / Cavaleri, L. / Di Trapani, F. / Ferrotto, M. F. (2017): Frictional Effects in Structural Behavior of No-End-Connected Steel-Jacketed RC Columns: Experimental Results and New Approaches to Model Numerical and Analytical Response. In: Journal of Structural Engineering (ASCE), v. 143, n. 8 (August 2017).

    https://doi.org/10.1061/(asce)st.1943-541x.0001796

  24. Campione, G. (2014): Flexural and Shear Resistance of Steel Fiber–Reinforced Lightweight Concrete Beams. In: Journal of Structural Engineering (ASCE), v. 140, n. 4 (April 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0000887

  25. Campione, G. / Cavaleri, L. / Macaluso, G. / Amato, G. / Di Trapani, F. (2014): Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads. In: Bulletin of Earthquake Engineering, v. 13, n. 8 (Dezember 2014).

    https://doi.org/10.1007/s10518-014-9714-x

  26. Campione, G. / Cannella, F. / Cavaleri, L. (2017): Practical Calculation Models for Column Footing and Comparison with Experimental Data. In: Practice Periodical on Structural Design and Construction, v. 22, n. 4 (November 2017).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000339

  27. Campione, G. / Cannella, F. / Cavaleri, L. (2015): Hand verification for flexural strength of existing R.C. floors subject to degradation phenomena. In: Case Studies in Structural Engineering, v. 4 (Dezember 2015).

    https://doi.org/10.1016/j.csse.2015.06.001

  28. Campione, G. / Cannella, F. / Ferrotto, M. F. / Gianquinto, M. (2018): Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars. In: Engineering Structures, v. 168 (August 2018).

    https://doi.org/10.1016/j.engstruct.2018.05.027

  29. Campione, G. / Monaco, A. / Minafò, G. (2014): Shear strength of high-strength concrete beams: Modeling and design recommendations. In: Engineering Structures, v. 69 (Juni 2014).

    https://doi.org/10.1016/j.engstruct.2014.02.029

  30. Campione, G. / Cavaleri, L. / Papia, M. (2017): Brick Masonry Columns Externally Wrapped with Steel Wires under Concentric and Eccentric Loads. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001956

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine