0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

John E. Breen

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Breen, John E. (1968): Fabrication and Tests of Structural Models. In: Journal of the Structural Division (ASCE), v. 94, n. 6 (Juni 1968).

    https://doi.org/10.1061/jsdeag.0001967

  2. Rezansoff, Telvin / Jirsa, James O. / Breen, John E. (1981): Lap Splices in Reinforced Concrete under Impact. In: Journal of the Structural Division (ASCE), v. 107, n. 8 (August 1981).

    https://doi.org/10.1061/jsdeag.0005768

  3. Wollmann, Gregor P. / Breen, John E. / Yates, David L. (1991): Fatigue strength of structural concrete girders. Vorgetragen bei: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.

    https://doi.org/10.5169/seals-47635

  4. Jirsa, James O. / Breen, John E. / Bergmeister, Konrad (1991): Experimental studies of nodes in strut-and-tie models. Vorgetragen bei: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.

    https://doi.org/10.5169/seals-47681

  5. Bergmeister, Konrad / Breen, John E. / Jirsa, James O. (1991): Dimensioning of the nodes and development of reinforcement. Vorgetragen bei: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.

    https://doi.org/10.5169/seals-47685

  6. Breen, John E. / Jirsa, James O. / Carrasquillo, Ramon L. (1987): Durability and development of epoxy-coated reinforcement. Vorgetragen bei: IABSE Symposium: Concrete Structures for the Future = Structures en béton de l'avenir = Betonbauwerke für die Zukunft, Paris & Versailles, France, 1987.

    https://doi.org/10.5169/seals-42717

  7. Breen, John E. (1987): Challenge of innovation in materials for structural concrete. Vorgetragen bei: IABSE Symposium: Concrete Structures for the Future = Structures en béton de l'avenir = Betonbauwerke für die Zukunft, Paris & Versailles, France, 1987.

    https://doi.org/10.5169/seals-42741

  8. Breen, John E. / Poston, Randall W. / Roesset, Jose M. (1987): Behavior and analysis of hollow concrete bridge piers. In: IABSE Proceedings, v. 11 ( 1987).

    https://doi.org/10.5169/seals-40375

  9. Green, R. / Breen, John E. (1984): Eccentrically loaded concrete columns: 15 years of sustained load. Vorgetragen bei: 12th IABSE Congress, Vancouver, BC, Canada, 3-7 September, 1984.

    https://doi.org/10.5169/seals-12215

  10. Breen, John E. (2000): Design of Bridges for Urban Transportation. Vorgetragen bei: IABSE Congress: Structural Engineering for Meeting Urban Transportation Challenges, Lucerne, Switzerland, 18-21 September 2000.

    https://doi.org/10.2749/222137900796298788

  11. Garber, David B. / Gallardo, Jose M. / Huaco, Guillermo D. / Samaras, Vasileios A. / Breen, John E. (2014): Experimental Evaluation of Strut-and-Tie Model of Indeterminate Deep Beam. In: ACI Structural Journal, v. 111, n. 4 (Juli 2014).

    https://doi.org/10.14359/51686738

  12. Talley, Kimberly Grau / Arrellaga, Jose / Breen, John E. (2014): Computational Modeling of Existing Damage in Concrete Bridge Columns. In: Journal of Structural Engineering (ASCE), v. 140, n. 12 (Dezember 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0001115

  13. Poston, Randall W. / Phipps, Alan R. / Almustafa, Riyadh A. / Breen, John E. / Carrasquillo, Ramon L. (1988): Effects of Transverse Prestressing in Bridge Decks. In: Journal of Structural Engineering (ASCE), v. 114, n. 4 (April 1988).

    https://doi.org/10.1061/(asce)0733-9445(1988)114:4(743)

  14. Breen, John E. / Kreger, Michael E. / White, Christopher D. / Clark, Gordon C. (1987): Field evaluation and model test of a composite wing-girder bridge. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 6 (Dezember 1987).

    https://doi.org/10.1139/l87-113

  15. Salas, Rubén M. / Schokker, Andrea J. / West, Jeff S. / Breen, John E. / Kreger, Michael E. (2008): Corrosion risk of bonded, post-tensioned concrete elements. In: PCI Journal, v. 53, n. 1 (Januar 2008).

    https://doi.org/10.15554/pcij.01012008.89.108

  16. West, Jeffrey S. / Breen, John E. / Vignos, René P. (2002): Evaluation of Corrosion Protection for Internal Prestressing Tendons in Precast Segmental Bridges. In: PCI Journal, v. 47, n. 5 (September 2002).

    https://doi.org/10.15554/pcij.09012002.76.91

  17. Poston, Randall W. / Breen, John E. / Carrasquillo, Ramon L. (1989): Design of Transversely Prestressed Concrete Bridge Decks. In: PCI Journal, v. 34, n. 5 (September 1989).

    https://doi.org/10.15554/pcij.09011989.68.109

  18. Kreger, Michael E. / Bachman, Patrick M. / Breen, John E. (1989): An Exploratory Study of Shear Fatigue Behavior of Prestressed Concrete Girders. In: PCI Journal, v. 34, n. 4 (Juli 1989).

    https://doi.org/10.15554/pcij.07011989.104.125

  19. Breen, John E. (1985): Controlling Twist in Precast Segmental Concrete Bridges. In: PCI Journal, v. 30, n. 4 (Juli 1985).

    https://doi.org/10.15554/pcij.07011985.86.111

  20. Stone, William C. / Breen, John E. (1984): Design of Post-Tensioned Girder Anchorage Zones. In: PCI Journal, v. 29, n. 2 (März 1984).

    https://doi.org/10.15554/pcij.03011984.28.61

  21. Stone, William C. / Breen, John E. (1984): Behavior of Post-Tensioned Girder Anchorage Zones. In: PCI Journal, v. 29, n. 1 (Januar 1984).

    https://doi.org/10.15554/pcij.01011984.64.109

  22. Breen, John E. (1980): Developing Structural Integrity in Bearing Wall Buildings. In: PCI Journal, v. 25, n. 1 (Januar 1980).

    https://doi.org/10.15554/pcij.01011980.42.73

  23. Lüthi, Tanya / Diephuis, Jeffrey R. / Icaza A., Juan José / Breen, John E. / Kreger, Michael E. (2008): Effects of Duct Types and Emulsifiable Oils on Bond and Friction Losses in Posttensioned Concrete. In: Journal of Bridge Engineering (ASCE), v. 13, n. 1 (Januar 2008).

    https://doi.org/10.1061/(asce)1084-0702(2008)13:1(100)

  24. Roberts-Wollman, Carin L. / Breen, John E. / Cawrse, Jason (2002): Measurements of Thermal Gradients and their Effects on Segmental Concrete Bridge. In: Journal of Bridge Engineering (ASCE), v. 7, n. 3 (Mai - Juni 2002).

    https://doi.org/10.1061/(asce)1084-0702(2002)7:3(166)

  25. Roberts-Wollmann, Carin L. / Breen, John E. / Kreger, Michael E. (2001): Live Load Tests of the San Antonio "Y". In: Journal of Bridge Engineering (ASCE), v. 6, n. 6 (November - Dezember 2001).

    https://doi.org/10.1061/(asce)1084-0702(2001)6:6(556)

  26. Breen, John E. (2009): Eminent Structural Engineer: Dr. Bruno Thürlimann (1923-2008). In: Structural Engineering International, v. 19, n. 1 (Februar 2009).

    https://doi.org/10.2749/101686609787398173

  27. Hamilton III, H. R. / Breen, John E. / Frank, K. H. (1995): Investigation of corrosion protection systems for bridge stay cables. Vorgetragen bei: IABSE Symposium: Extending the Lifespan of Structures, San Francisco, CA, USA, August 1995.

    https://doi.org/10.5169/seals-55283

  28. Hamilton III, H. R. / Breen, John E. (1995): International survey of current opinion on bridge stay cable systems. Vorgetragen bei: IABSE Symposium: Extending the Lifespan of Structures, San Francisco, CA, USA, August 1995.

    https://doi.org/10.5169/seals-55277

  29. Breen, John E. / Wood, Sharon L. (2004): 2004 Marks a Century of Progress for the American Concrete Institute ACI. In: Beton- und Stahlbetonbau, v. 99, n. 7 (Juli 2004).

    https://doi.org/10.1002/best.200490151

  30. Roberts-Wollmann, C. L. / Breen, John E. / Kreger, M. E. (1996): Field Instrumentation of a Post-Tensioned Segmental Box Girder Bridge. In: Structural Engineering International, v. 6, n. 4 (November 1996).

    https://doi.org/10.2749/101686696780496265

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine