Ana Brás 
- (2023): Life Cycle Assessment of a Sustainable Prefabricated Housing System: A Cradle-to-Site Approach Based on a Small-Scale Experimental Model. In: Buildings, v. 13, n. 4 (24 März 2023).
- (2023): Biomineralisation to improve properties of polymer modified concrete for chloride environments. In: Construction and Building Materials, v. 379 (Mai 2023).
- (2022): Activated sugarcane bagasse ash as efficient admixture in cement-based mortars: Mechanical and durability improvements. In: Journal of Building Engineering, v. 59 (November 2022).
- (2022): Metamodel techniques to estimate the compressive strength of UHPFRC using various mix proportions and a high range of curing temperatures. In: Construction and Building Materials, v. 349 (September 2022).
- (2023): Development of sustainable prefabricated housing system by small-scale experimental model. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 176, n. 1 (Februar 2023).
- (2020): The adaptive thermal comfort review from the 1920s, the present, and the future. In: Developments in the Built Environment, v. 4 (November 2020).
- (2019): Impact of repairs on embodied carbon dioxide expenditure for a reinforced-concrete quay. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 172, n. 2 (April 2019).
- (2017): Embodied carbon minimisation of retrofit solutions for walls. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 170, n. 3 (Juni 2017).
- (2014): Cork-based mortars for thermal bridges correction in a dwelling: Thermal performance and cost evaluation. In: Energy and Buildings, v. 72 (April 2014).
- (2014): Economic evaluation of the energy consumption and thermal passive performance of Portuguese dwellings. In: Energy and Buildings, v. 76 (Juni 2014).
- (2015): LCA implementation in the selection of thermal enhanced mortars for energetic rehabilitation of school buildings. In: Energy and Buildings, v. 92 (April 2015).
- (2017): Effectiveness of design codes for life cycle energy optimisation. In: Energy and Buildings, v. 140 (April 2017).
- (2017): Effectiveness of mortars composition on the embodied carbon long-term impact. In: Energy and Buildings, v. 154 (November 2017).
- (2020): The influence of incorporating plastic within concrete and the potential use of microwave curing; A review. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): A Novel Adaptive Lighting System Which Considers Behavioral Adaptation Aspects for Visually Impaired People. In: Buildings, v. 10, n. 9 (19 August 2020).
- (2020): Experimental characterisation of non-encapsulated bio-based concrete with self-healing capacity. In: Construction and Building Materials, v. 256 (September 2020).
- : Natural hydraulic lime based grouts – The selection of grout injection parameters for masonry consolidation. In: Construction and Building Materials.
- (2017): Lifetime Prediction of Reinforced Concrete Structures in Carbonation Environments Carbonation Modelling Vs Air Permeability Modelling. In: Journal of Civil Engineering and Management, v. 23, n. 2 (Februar 2017).
- (2019): Optimisation of bio-based building materials using image analysis method. In: Construction and Building Materials, v. 223 (Oktober 2019).
- (2019): Brita Lavada – An eco-efficient decorative mortar from Madeira Island. In: Journal of Building Engineering, v. 24 (Juli 2019).
- (2019): Development of sustainable alkali-activated bricks using industrial wastes. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Dynamic behaviour of bio-based and recycled materials for indoor environmental comfort. In: Construction and Building Materials, v. 211 (Juni 2019).
- (2010): Effect of environmental temperature and fly ash addition in hydraulic lime grout behaviour. In: Construction and Building Materials, v. 24, n. 8 (August 2010).
- (2013): Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance. In: Construction and Building Materials, v. 49 (Dezember 2013).
- (2014): Corrosion inhibitors' effect on design service life of RC structures. In: Construction and Building Materials, v. 53 (Februar 2014).
- (2015): The effect of corrosion inhibitors on the modelling of design lifetime of RC structures. In: Materials and Structures, v. 48, n. 5 (Mai 2015).
- (2009): The influence of the mixing procedures on the optimization of fresh grout properties. In: Materials and Structures, v. 42, n. 10 (Dezember 2009).
- (2016): Lifetime modelling of chloride-induced corrosion in concrete structures with Portland and blended cements. In: Structure and Infrastructure Engineering, v. 12, n. 9 (September 2016).
- (2015): Integrated approach for school buildings rehabilitation in a Portuguese city and analysis of suitable third party financing solutions in EU. In: Journal of Building Engineering, v. 3 (September 2015).
Structurae kooperiert mit
