0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Jurgen Becque

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Mojtabaei, Seyed Mohammad / Yılmaz, Fatih / Becque, Jurgen / Hajirasouliha, Iman (2023): Lateral performance of cold‐formed steel OSB‐sheathed stud wall panels. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2706

  2. Becque, Jurgen (2023): An Analytical Design Approach for Outstand Steel Plates in Compression. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2535

  3. Becque, Jurgen / Gilbert, Saul (2023): Design of Stainless Steel Cross‐Sections by Inelastic Stability Analysis. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2523

  4. Mojtabaei, Seyed Mohammad / Becque, Jurgen / Khandan, Rasoul / Hajirasouliha, Iman (2023): Machine learning‐based predictions of buckling behaviour of cold‐formed steel structural elements. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2727

  5. Becque, Jurgen (2021): Linking the von Karman Equations to the Practical Design of Plates. In: Journal of Engineering Mechanics (ASCE), v. 147, n. 11 (November 2021).

    https://doi.org/10.1061/(asce)em.1943-7889.0002005

  6. Mojtabaei, Seyed Mohammad / Hajirasouliha, Iman / Becque, Jurgen (2021): Optimized Design of Cold‐Formed Steel Elements for Serviceability and Ultimate Limit States. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1319

  7. Ringas, Nikolas / Huang, Yuner / Becque, Jurgen (2021): Fastener behaviour in sheathed light‐gauge steel stud walls under cyclic and monotonic actions. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1324

  8. Morales, Mariela Mendez / Becque, Jurgen (2021): Determining the Yield Surface of a Metal Using Notched Strip Specimens: Geometry Optimization. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1464

  9. Mojtabaei, Seyed Mohammad / Becque, Jurgen / Hajirasouliha, Iman (2021): Behaviour and Design of Cold‐Formed Steel Bolted Portal Frame Connections. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1313

  10. Mojtabaei, Seyed Mohammad / Becque, Jurgen / Hajirasouliha, Iman (2021): Behavior and Design of Cold-Formed Steel Bolted Connections Subjected to Combined Actions. In: Journal of Structural Engineering (ASCE), v. 147, n. 4 (April 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002966

  11. Becque, Jurgen (2019): Optimization of cold‐formed steel products: achievements, challenges and opportunities. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1048

  12. Mojtabaei, Seyed Mohammad / Becque, Jurgen / Hajirasouliha, Iman (2020): Local Buckling in Cold-Formed Steel Moment-Resisting Bolted Connections: Behavior, Capacity, and Design. In: Journal of Structural Engineering (ASCE), v. 146, n. 9 (September 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002730

  13. Meza, Francisco J. / Becque, Jurgen / Hajirasouliha, Iman (2020): Experimental Study of Cold-Formed Steel Built-Up Beams. In: Journal of Structural Engineering (ASCE), v. 146, n. 7 (Juli 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002677

  14. Ye, Jun / Hajirasouliha, Iman / Becque, Jurgen / Pilakoutas, Kypros (2016): Development of more efficient cold-formed steel channel sections in bending. In: Thin-Walled Structures, v. 101 (April 2016).

    https://doi.org/10.1016/j.tws.2015.12.021

  15. Becque, Jurgen (2010): Inelastic Plate Buckling. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 9 (September 2010).

    https://doi.org/10.1061/(asce)em.1943-7889.0000075

  16. Becque, Jurgen / Oyawoye, Ajibola / Guadagnini, Maurizio / Huang, Shan-Shan (2014): Notched Strip Tensile Tests to Determine Yield Characteristics of Stainless Steel. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 4 (April 2014).

    https://doi.org/10.1061/(asce)em.1943-7889.0000701

  17. Ye, Jun / Meza, Francisco J. / Hajirasouliha, Iman / Becque, Jurgen / Shepherd, Paul / Pilakoutas, Kypros (2019): Experimental Investigation of Cross-Sectional Bending Capacity of Cold-Formed Steel Channels Subject to Local-Distortional Buckling Interaction. In: Journal of Structural Engineering (ASCE), v. 145, n. 7 (Juli 2019).

    https://doi.org/10.1061/(asce)st.1943-541x.0002344

  18. Becque, Jurgen / Lecce, Maura / Rasmussen, Kim J. R. (2008): The direct strength method for stainless steel compression members. In: Journal of Constructional Steel Research, v. 64, n. 11 (November 2008).

    https://doi.org/10.1016/j.jcsr.2008.07.007

  19. Becque, Jurgen / Rasmussen, Kim J. R. (2009): Experimental investigation of local-overall interaction buckling of stainless steel lipped channel columns. In: Journal of Constructional Steel Research, v. 65, n. 8-9 (August 2009).

    https://doi.org/10.1016/j.jcsr.2009.04.025

  20. Becque, Jurgen / Rasmussen, Kim J. R. (2009): A numerical investigation of local–overall interaction buckling of stainless steel lipped channel columns. In: Journal of Constructional Steel Research, v. 65, n. 8-9 (August 2009).

    https://doi.org/10.1016/j.jcsr.2009.04.027

  21. Becque, Jurgen / Wilkinson, Tim (2017): The capacity of grade C450 cold-formed rectangular hollow section T and X connections: An experimental investigation. In: Journal of Constructional Steel Research, v. 133 (Juni 2017).

    https://doi.org/10.1016/j.jcsr.2017.02.032

  22. Becque, Jurgen / Patnaik, Anil K. / Rizkalla, Sami H. (2003): Analytical Models for Concrete Confined with FRP Tubes. In: Journal of Composites for Construction, v. 7, n. 1 (Februar 2003).

    https://doi.org/10.1061/(asce)1090-0268(2003)7:1(31)

  23. Ma, Weixin / Becque, Jurgen / Hajirasouliha, Iman / Ye, Jun (2015): Cross-sectional optimization of cold-formed steel channels to Eurocode 3. In: Engineering Structures, v. 101 (Oktober 2015).

    https://doi.org/10.1016/j.engstruct.2015.07.051

  24. Cheng, Shanshan / Becque, Jurgen (2016): A design methodology for side wall failure of RHS truss X-joints accounting for compressive chord pre-load. In: Engineering Structures, v. 126 (November 2016).

    https://doi.org/10.1016/j.engstruct.2016.08.019

  25. Becque, Jurgen / Rasmussen, Kim J. R. (2009): Numerical Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns. In: Journal of Structural Engineering (ASCE), v. 135, n. 11 (November 2009).

    https://doi.org/10.1061/(asce)st.1943-541x.0000052

  26. Becque, Jurgen / Rasmussen, Kim J. R. (2009): Experimental Investigation of the Interaction of Local and Overall Buckling of Stainless Steel I-Columns. In: Journal of Structural Engineering (ASCE), v. 135, n. 11 (November 2009).

    https://doi.org/10.1061/(asce)st.1943-541x.0000051

  27. Becque, Jurgen (2015): A new approach to modal decomposition of buckled shapes. In: Structures, v. 4 (November 2015).

    https://doi.org/10.1016/j.istruc.2015.10.011

  28. Ye, Jun / Becque, Jurgen / Hajirasouliha, Iman / Mojtabaei, Seyed Mohammad / Lim, James B. P. (2018): Development of optimum cold-formed steel sections for maximum energy dissipation in uniaxial bending. In: Engineering Structures, v. 161 (April 2018).

    https://doi.org/10.1016/j.engstruct.2018.01.070

  29. Meza, Francisco / Becque, Jurgen (2017): 07.15: Experimental and numerical investigation of cold-formed steel built-up stub columns. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.205

  30. Ye, Jun / Gao, Boqing / Shepherd, Paul / Becque, Jurgen / Hajirasouliha, Iman (2017): A grid generation procedure for the design of single-layer free-form structures. Vorgetragen bei: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine