Chee Ban Cheah
- (2024): Blended cement and mortar with various low-calcium ground coal bottom ash content: Engineering characteristics, embodied carbon and cost analysis. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): Influence of milling parameters on the properties of ground coal bottom ash and its blended cement. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2022): Coal bottom ash as constituent binder and aggregate replacement in cementitious and geopolymer composites: A review. In: Journal of Building Engineering, v. 52 (Juli 2022).
- (2022): Properties of ternary blended cement containing ground granulated blast furnace slag and ground coal bottom ash. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2022): Development of sintered aggregate derived from POFA and silt for lightweight concrete. In: Journal of Building Engineering, v. 49 (Mai 2022).
- (2021): Physico-mechanical properties and micromorphology of AAS mortars containing copper slag as fine aggregate at elevated temperature. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2021): Engineering and gamma-ray attenuation properties of steel furnace slag heavyweight concrete with nano calcium carbonate and silica. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Recent advances in slag-based binder and chemical activators derived from industrial by-products – A review. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2021): Effect of nano zinc oxide and silica on mechanical, fluid transport and radiation attenuation properties of steel furnace slag heavyweight concrete. In: Construction and Building Materials, v. 274 (März 2021).
- (2020): Partial replacement of copper slag with treated crumb rubber aggregates in alkali-activated slag mortar. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): The influence of type and combination of polycarboxylate ether superplasticizer on the mechanical properties and microstructure of slag-silica fume ternary blended self-consolidating concrete. In: Journal of Building Engineering, v. 31 (September 2020).
- (2020): Glass powder as a partial precursor in Portland cement and alkali-activated slag mortar: A comprehensive comparative study. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): The influence of main and side chain densities of PCE superplasticizer on engineering properties and microstructure development of slag and fly ash ternary blended cement concrete. In: Construction and Building Materials, v. 242 (Mai 2020).
- (2019): The setting behavior, mechanical properties and drying shrinkage of ternary blended concrete containing granite quarry dust and processed steel slag aggregate. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): The engineering performance of concrete containing high volume of ground granulated blast furnace slag and pulverized fly ash with polycarboxylate-based superplasticizer. In: Construction and Building Materials, v. 202 (März 2019).
- (2012): Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement. In: Construction and Building Materials, v. 30 (Mai 2012).
- (2012): Load capacity and crack development characteristics of HCWA–DSF high strength mortar ferrocement panels in flexure. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): The engineering properties of high performance concrete with HCWA–DSF supplementary binder. In: Construction and Building Materials, v. 40 (März 2013).
- (2014): Flexural strength and impact resistance study of fibre reinforced concrete in simulated aggressive environment. In: Construction and Building Materials, v. 63 (Juli 2014).
- (2015): The hybridizations of coal fly ash and wood ash for the fabrication of low alkalinity geopolymer load bearing block cured at ambient temperature. In: Construction and Building Materials, v. 88 (Juli 2015).
- (2015): An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products. In: Construction and Building Materials, v. 77 (Februar 2015).
- (2016): The engineering properties and microstructure development of cement mortar containing high volume of inter-grinded GGBS and PFA cured at ambient temperature. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): The long term engineering properties of cementless building block work containing large volume of wood ash and coal fly ash. In: Construction and Building Materials, v. 143 (Juli 2017).
- (2019): The mechanical strength and durability properties of ternary blended cementitious composites containing granite quarry dust (GQD) as natural sand replacement. In: Construction and Building Materials, v. 197 (Februar 2019).
- (2015): Accelerated curing regimes for polymer-modified cement. In: Magazine of Concrete Research, v. 67, n. 23 (Dezember 2015).
Structurae kooperiert mit
