Yu Bai 
- (2024): Impact of urban greenspace on the urban thermal environment: A case study of Shenzhen, China. In: Sustainable Cities and Society, v. 112 (Oktober 2024).
- (2020): Lateral stiffness evaluation on corner-supported thin walled modular steel structures. In: Thin-Walled Structures, v. 157 (Dezember 2020).
- (2016): Large diameter concrete-filled high strength steel tubular stub columns under compression. In: Thin-Walled Structures, v. 108 (November 2016).
- (2024): Low-high-low cyclic performance of screw connections for fibre-polymer composites. In: Construction and Building Materials, v. 419 (März 2024).
- (2024): Influence of the anchor angle on the seismic response of anchored stabilizing piles: Centrifuge modeling tests. In: Soil Dynamics and Earthquake Engineering, v. 180 (Mai 2024).
- (2023): Loss of preload of unprotected bolted joints considering environmental effects: A comparative study. In: Journal of Constructional Steel Research, v. 211 (Dezember 2023).
- (2023): In-plane shear behaviour of prefabricated modular wall system assembled of fibre reinforced polymer composites. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Mechanical and durability properties of epoxy mortar incorporating coal bottom ash as filler. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2021): Influence of board joint configurations on the fire performance of CFS walls. In: Journal of Constructional Steel Research, v. 179 (April 2021).
- (2021): Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP. In: Composite Structures, v. 262 (April 2021).
- (2017): Joint capacity of bonded sleeve connections for tubular fibre reinforced polymer members. In: Composite Structures, v. 163 (März 2017).
- (2015): Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression. In: Composite Structures, v. 123 (Mai 2015).
- (2011): Mechanical characterization of steel/CFRP double strap joints at elevated temperatures. In: Composite Structures, v. 93, n. 6 (Mai 2011).
- (2020): Intelligent Framework for Worker-Machine Safety Assessment. In: Journal of Construction Engineering and Management, v. 146, n. 5 (Mai 2020).
- (2020): Load-Dependent Composite Action for Beam Nonlinear and Ductile Behavior. In: Journal of Structural Engineering (ASCE), v. 146, n. 4 (April 2020).
- (2018): Low cycle fatigue property and fracture behavior of low yield point steels. In: Construction and Building Materials, v. 165 (März 2018).
- (2013): Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems. In: Thin-Walled Structures, v. 73 (Dezember 2013).
- (2020): Joint Strength of Single-Bolted Pultruded GFRP Square Hollow Sections with Mechanical Inserts under Elevated Temperatures. In: Journal of Composites for Construction, v. 24, n. 1 (Februar 2020).
- (2019): Lean Methodologies and Techniques for Modular Construction: Chronological and Critical Review. In: Journal of Construction Engineering and Management, v. 145, n. 12 (Dezember 2019).
- (2012): Improved measure of beam-to-column joint rotation in steel frames. In: Journal of Constructional Steel Research, v. 70 (März 2012).
- (2014): Local buckling of 460MPa high strength steel welded section stub columns under axial compression. In: Journal of Constructional Steel Research, v. 100 (September 2014).
- (2016): Load-Strain Model for Steel-Concrete-FRP-Concrete Columns in Axial Compression. In: Journal of Composites for Construction, v. 20, n. 5 (Oktober 2016).
- (2007): Long-Term Performance of a Glass Fiber-Reinforced Polymer Truss Bridge. In: Journal of Composites for Construction, v. 11, n. 1 (Februar 2007).
- (2016): Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2016): Improved bond behavior between GFRP rebar and concrete using calcium sulfoaluminate. In: Construction and Building Materials, v. 113 (Juni 2016).
- (2017): Kinetic modelling of thermophysical properties of shape memory alloys during phase transformation. In: Construction and Building Materials, v. 131 (Januar 2017).
- (2015): Mechanical behavior of geopolymer concrete subjected to high strain rate compressive loadings. In: Materials and Structures, v. 48, n. 3 (März 2015).
- (2014): Local buckling of steel equal angle members with normal and high strengths. In: International Journal of Steel Structures, v. 14, n. 3 ( 2014).
- (2017): hybrid solution for studying vibrations of coupled train–track–bridge system. In: Advances in Structural Engineering, v. 20, n. 11 (Juni 2017).
- (2012): In-Plane Bending of Laminated Glass Fin Strengthened through External Bonding. In: Advances in Structural Engineering, v. 15, n. 1 (Januar 2012).
Structurae kooperiert mit
