0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

S. A. Austin

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Le, T. T. / Austin, S. A. / Lim, S. / Buswell, R. A. / Law, R. / Gibb, A. G. F. / Thorpe, T. (2012): Hardened properties of high-performance printing concrete. In: Cement and Concrete Research, v. 42, n. 3 (März 2012).

    https://doi.org/10.1016/j.cemconres.2011.12.003

  2. Thomson, D. S. / Austin, S. A. / Root, D. S. / Thorpe, A. / Hammond, J. W. (2006): A problem‐solving approach to value‐adding decision making in construction design. In: Engineering, Construction and Architectural Management, v. 13, n. 1 (Januar 2006).

    https://doi.org/10.1108/09699980610646494

  3. Christodoulou, C. / Goodier, C. I. / Austin, S. A. / Glass, G. K. / Webb, J. (2014): A new arrangement of galvanic anodes for the repair of reinforced concrete structures. In: Construction and Building Materials, v. 50 (Januar 2014).

    https://doi.org/10.1016/j.conbuildmat.2013.09.062

  4. Christodoulou, C. / Goodier, C. I. / Austin, S. A. / Webb, J. / Glass, G. K. (2013): Long-term performance of surface impregnation of reinforced concrete structures with silane. In: Construction and Building Materials, v. 48 (November 2013).

    https://doi.org/10.1016/j.conbuildmat.2013.07.038

  5. Austin, S. A. / Goodier, C. I. / Robins, P. J. (2005): Low-volume wet-process sprayed concrete: pumping and spraying. In: Materials and Structures, v. 38, n. 2 (März 2005).

    https://doi.org/10.1007/bf02479348

  6. Robins, P. J. / Austin, S. A. / Issaad, A. (1992): Suitability of GGBFS as a cement replacement for concrete in hot arid climates. In: Materials and Structures, v. 25, n. 10 (Dezember 1992).

    https://doi.org/10.1007/bf02472228

  7. Jones, P. A. / Austin, S. A. / Robins, P. J. (2008): Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data. In: Materials and Structures, v. 41, n. 3 (April 2008).

    https://doi.org/10.1617/s11527-007-9327-9

  8. Le, T. T. / Austin, S. A. / Lim, S. / Buswell, R. A. / Gibb, A. G. F. / Thorpe, T. (2012): Mix design and fresh properties for high-performance printing concrete. In: Materials and Structures, v. 45, n. 8 (August 2012).

    https://doi.org/10.1617/s11527-012-9828-z

  9. Baldwin, A. N. / Shen, L. Y. / Poon, C. S. / Austin, S. A. / Wong, I. (2008): Modelling design information to evaluate pre-fabricated and pre-cast design solutions for reducing construction waste in high rise residential buildings. In: Automation in Construction, v. 17, n. 3 (März 2008).

    https://doi.org/10.1016/j.autcon.2007.05.013

  10. Lim, S. / Buswell, R. A. / Le, T. T. / Austin, S. A. / Gibb, A. G. F. / Thorpe, T. (2012): Developments in construction-scale additive manufacturing processes. In: Automation in Construction, v. 21 (Januar 2012).

    https://doi.org/10.1016/j.autcon.2011.06.010

  11. Austin, S. A. / Al-Kindy, A. A. (2000): Air permeability versus sorptivity: effects of field curing on cover concrete after one year of field exposure. In: Magazine of Concrete Research, v. 52, n. 1 (Februar 2000).

    https://doi.org/10.1680/macr.2000.52.1.17

  12. Dehwah, H. A. F. / Austin, S. A. / Maslehuddin, M. (2002): Chloride-induced reinforcement corrosion in blended cement concretes exposed to chloride-sulphate environments. In: Magazine of Concrete Research, v. 54, n. 5 (Oktober 2002).

    https://doi.org/10.1680/macr.2002.54.5.355

  13. Austin, S. A. / Robins, P. J. / Bishop, J. W. (2006): Instrumentation and early-age monitoring of concrete slabs. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 159, n. 4 (August 2006).

    https://doi.org/10.1680/stbu.2006.159.4.187

  14. Robins, P. J. / Austin, S. A. / Jones, P. A. (2003): Spatial distribution of steel fibres in sprayed and cast concrete. In: Magazine of Concrete Research, v. 55, n. 3 (Juni 2003).

    https://doi.org/10.1680/macr.2003.55.3.225

  15. Robins, P. J. / Austin, S. A. (1985): Core point-load test for steel-fibre-reinforced concrete. In: Magazine of Concrete Research, v. 37, n. 133 (Dezember 1985).

    https://doi.org/10.1680/macr.1985.37.133.238

  16. Austin, S. A. / Robins, P. J. (1993): Development of patch test to study behaviour of shallow concrete patch repairs. In: Magazine of Concrete Research, v. 45, n. 164 (September 1993).

    https://doi.org/10.1680/macr.1993.45.164.221

  17. Robins, P. J. / Austin, S. A. (1995): A unified failure envelope from the evaluation of concrete repair bond tests. In: Magazine of Concrete Research, v. 47, n. 170 (März 1995).

    https://doi.org/10.1680/macr.1995.47.170.57

  18. Austin, S. A. / Robins, P. J. (1997): Influence of early curing on the sub-surface permeability and strength of silica fume concrete. In: Magazine of Concrete Research, v. 49, n. 178 (März 1997).

    https://doi.org/10.1680/macr.1997.49.178.23

  19. Austin, S. A. / Robins, P. J. / Peaston, C. H. (1998): Effects of silica fume on dry-process sprayed concrete. In: Magazine of Concrete Research, v. 50, n. 1 (März 1998).

    https://doi.org/10.1680/macr.1998.50.1.25

  20. Austin, S. A. / Robins, P. J. / Goodier, C. I. (1999): The rheological performance of wet-process sprayed mortars. In: Magazine of Concrete Research, v. 51, n. 5 (Oktober 1999).

    https://doi.org/10.1680/macr.1999.51.5.341

  21. Baldwin, A. N. / Austin, S. A. / Hassan, T. M. / Thorpe, A. (1999): Modelling information flow during the conceptual and schematic stages of building design. In: Construction Management and Economics, v. 17, n. 2 (März 1999).

    https://doi.org/10.1080/014461999371655

  22. Austin, S. A. / Robins, P. J. / Goodier, C. I. (2000): The performance of hardened wet-process sprayed mortars. In: Magazine of Concrete Research, v. 52, n. 3 (Juni 2000).

    https://doi.org/10.1680/macr.2000.52.3.195

  23. Austin, S. A. / Peaston, C. H. / Robins, P. J. (1997): Material and fibre losses with fibre reinforced sprayed concrete. In: Construction and Building Materials, v. 11, n. 5-6 (Januar 1997).

    https://doi.org/10.1016/s0950-0618(97)00050-0

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine