Ferdinando Auricchio 
- (2024): Design of multi-material structures using material jetting technology: Topology optimisation, numerical analysis and experiments. In: Composite Structures, v. 330 (Februar 2024).
- (2022): Experimental investigation and modeling of the temperature memory effect in a 4D-printed auxetic structure. In: Smart Materials and Structures, v. 31, n. 9 (7 Juli 2022).
- (2021): Early-age creep behaviour of 3D printable mortars: Experimental characterisation and analytical modelling. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2017): 3D Printing Technology for Buildings’ Accessibility: The Tactile Map for MTE Museum in Pavia. In: Journal of Civil Engineering and Architecture, v. 11, n. 8 (August 2017).
- (2019): Innovative dampers as floor isolation systems for seismically-retrofit multi-storey critical facilities. In: Engineering Structures, v. 201 (Dezember 2019).
- (2010): A new modeling approach for planar beams: finite-element solutions based on mixed variational derivations. In: Journal of Mechanics of Materials and Structures, v. 5, n. 5 (Dezember 2010).
- (1999): Partial-mixed formulation and refined models for the analysis of composite laminates within an FSDT. In: Composite Structures, v. 46, n. 2 (Oktober 1999).
- (2019): Modeling the non-trivial behavior of anisotropic beams: A simple Timoshenko beam with enhanced stress recovery and constitutive relations. In: Composite Structures, v. 229 (Dezember 2019).
- (2014): Enhanced modeling approach for multilayer anisotropic plates based on dimension reduction method and Hellinger–Reissner principle. In: Composite Structures, v. 118 (Dezember 2014).
- (2013): Statistical finite element analysis of the buckling behavior of honeycomb structures. In: Composite Structures, v. 105 (November 2013).
- (2020): Structural analysis of non-prismatic beams: Critical issues, accurate stress recovery, and analytical definition of the Finite Element (FE) stiffness matrix. In: Engineering Structures, v. 213 (Juni 2020).
- (2020): Effect of testing procedures on buildability properties of 3D-printable concrete. In: Construction and Building Materials, v. 245 (Juni 2020).
- (2018): 3D printing of reinforced concrete elements: Technology and design approach. In: Construction and Building Materials, v. 165 (März 2018).
- (2019): Topology optimization of stress-constrained structural elements using risk-factor approach. In: Computers & Structures, v. 224 (Dezember 2019).
- (2015): Hysteresis of Multiconfiguration Assemblies of Nitinol and Steel Strands: Experiments and Phenomenological Identification. In: Journal of Engineering Mechanics (ASCE), v. 141, n. 3 (März 2015).
- (2008): Feasibility Assessment of an Innovative Isolation Bearing System with Shape Memory Alloys. In: Journal of Earthquake Engineering, v. 13, n. 1 ( 2008).
- (2006): Earthquake Performance Of Steel Frames With Nitinol Braces. In: Journal of Earthquake Engineering, v. 10, n. 1 ( 2006).
- (2011): Innovative Superelastic Isolation Device. In: Journal of Earthquake Engineering, v. 15, n. 1 ( 2011).
- (2006): A mixed FSDT finite element for monoclinic laminated plates. In: Computers & Structures, v. 84, n. 8-9 (März 2006).
- (2017): Serviceability Analysis of Non-Prismatic Timber Beams: Derivation and Validation of New and Effective Straightforward Formulas. In: Open Journal of Civil Engineering, v. 7, n. 1 ( 2017).
- (2015): Analytical derivation of a general 2D non-prismatic beam model based on the Hellinger–Reissner principle. In: Engineering Structures, v. 101 (Oktober 2015).
- (2007): A 1D rate-dependent viscous constitutive model for superelastic shape-memory alloys: formulation and comparison with experimental data. In: Smart Materials and Structures, v. 16, n. 1 (Februar 2007).
- (2007): Seismic Assessment of Concentrically Braced Steel Frames with Shape Memory Alloy Braces. In: Journal of Structural Engineering (ASCE), v. 133, n. 6 (Juni 2007).
- (2019): Numerical investigation on the seismic dissipation of glazed curtain wall equipped on high-rise buildings. In: Engineering Structures, v. 179 (Januar 2019).
- (2019): Integrated shape memory alloy devices toward a high-performance glazed curtain wall seismic retrofit. In: Engineering Structures, v. 179 (Januar 2019).
Structurae kooperiert mit
