0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

P. Arias

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Arias, P. / Armesto, J. / Di-Capua, D. / Gonzalez-Drigo, R. / Lorenzo, H. / Pérez-Gracia, V. (2007): Digital photogrammetry, GPR and computational analysis of structural damages in a mediaeval bridge. In: Engineering Failure Analysis, v. 14, n. 8 (Dezember 2007).

    https://doi.org/10.1016/j.engfailanal.2007.02.001

  2. Sanz-Ablanedo, E. / Lamela, M. J. / Rodríguez-Pérez, José R. / Arias, P. (2010): Modelling and experimental contrast of the mechanical behaviour of structural laminated glass. Modelización y contraste experimental del comportamiento mecánico del vidrio laminado estructural. In: Materiales de Construccion, v. 60, n. 300 (Dezember 2010).

    https://doi.org/10.3989/mc.2010.51909

  3. Lagüela, S. / Martinez, J. / Armesto, J. / Arias, P. (2011): Energy efficiency studies through 3D laser scanning and thermographic technologies. In: Energy and Buildings, v. 43, n. 6 (Juni 2011).

    https://doi.org/10.1016/j.enbuild.2010.12.031

  4. Díaz-Vilariño, L. / Lagüela, S. / Armesto, J. / Arias, P. (2014): Indoor daylight simulation performed on automatically generated as-built 3D models. In: Energy and Buildings, v. 68 (Januar 2014).

    https://doi.org/10.1016/j.enbuild.2013.02.064

  5. Garrido, I. / Lagüela, S. / Arias, P. / Balado, J. (2018): Thermal-based analysis for the automatic detection and characterization of thermal bridges in buildings. In: Energy and Buildings, v. 158 (Januar 2018).

    https://doi.org/10.1016/j.enbuild.2017.11.031

  6. Lorenzo, H. / Arias, P. / Armesto, J. / Rial, F. / Pereira, M. / Novo, A. / Riveiro, B.: Documentation and evaluation of historic masonry arch bridges by means of geomatic techniques. Vorgetragen bei: ARCH’07 – 5th International Conference on Arch Bridges, Madeira, Portugal, 12-14 September 2007.
  7. Morer, P. / de Arteaga, I. / Armesto, J. / Arias, P. (2011): Comparative structural analyses of masonry bridges: An application to the Cernadela Bridge. In: Journal of Cultural Heritage, v. 12, n. 3 (Juli 2011).

    https://doi.org/10.1016/j.culher.2011.01.006

  8. Arias, P. / Ordoñez, C. / Lorenzo, H. / Herráez, J. / Armesto, J. (2007): Low-cost documentation of traditional agro-industrial buildings by close-range photogrammetry. In: Building and Environment, v. 42, n. 4 (April 2007).

    https://doi.org/10.1016/j.buildenv.2006.02.002

  9. Arias, P. / Ordoñez, C. / Lorenzo, H. / Herráez, J. (2006): Methods for documenting historical agro-industrial buildings: a comparative study and a simple photogrammetric method. In: Journal of Cultural Heritage, v. 7, n. 4 (Oktober 2006).

    https://doi.org/10.1016/j.culher.2006.09.002

  10. Arias, P. / Herráez, J. / Lorenzo, H. / Ordoñez, C. (2005): Control of structural problems in cultural heritage monuments using close-range photogrammetry and computer methods. In: Computers & Structures, v. 83, n. 21-22 (August 2005).

    https://doi.org/10.1016/j.compstruc.2005.02.018

  11. Bueno, M. / Díaz-Vilariño, L. / González-Jorge, H. / Martínez-Sánchez, J. / Arias, P. (2017): Quantitative Evaluation of CHT and GHT for Column Detection under Different Conditions of Data Quality. In: Journal of Computing in Civil Engineering, v. 31, n. 5 (September 2017).

    https://doi.org/10.1061/(asce)cp.1943-5487.0000678

  12. Cabaleiro, M. / Riveiro, B. / Arias, P. / Caamaño, J. C. (2016): Algorithm for the analysis of deformations and stresses due to torsion in a metal beam from LIDAR data. In: Structural Control and Health Monitoring, v. 23, n. 7 (Juli 2016).

    https://doi.org/10.1002/stc.1824

  13. Riveiro, B. / Morer, P. / Arias, P. / de Arteaga, I. (2011): Terrestrial laser scanning and limit analysis of masonry arch bridges. In: Construction and Building Materials, v. 25, n. 4 (April 2011).

    https://doi.org/10.1016/j.conbuildmat.2010.11.094

  14. González-Jorge, H. / González-Aguilera, D. / Rodríguez-Gonzálvez, P. / Arias, P. (2012): Monitoring biological crusts in civil engineering structures using intensity data from terrestrial laser scanners. In: Construction and Building Materials, v. 31 (Juni 2012).

    https://doi.org/10.1016/j.conbuildmat.2011.12.053

  15. Carr, A. J. / Jauregui, D. V. / Riveiro, B. / Arias, P. / Armesto, J. (2013): Structural evaluation of historic masonry arch bridges based on first hinge formation. In: Construction and Building Materials, v. 47 (Oktober 2013).

    https://doi.org/10.1016/j.conbuildmat.2013.05.084

  16. Lagüela, S. / Díaz-Vilariño, L. / Armesto, J. / Arias, P. (2014): Non-destructive approach for the generation and thermal characterization of an as-built BIM. In: Construction and Building Materials, v. 51 (Januar 2014).

    https://doi.org/10.1016/j.conbuildmat.2013.11.021

  17. Díaz-Vilariño, L. / González-Jorge, H. / Bueno, M. / Arias, P. / Puente, I. (2016): Automatic classification of urban pavements using mobile LiDAR data and roughness descriptors. In: Construction and Building Materials, v. 102 (Januar 2016).

    https://doi.org/10.1016/j.conbuildmat.2015.10.199

  18. Conde, B. / Díaz-Vilariño, L. / Lagüela, S. / Arias, P. (2016): Structural analysis of Monforte de Lemos masonry arch bridge considering the influence of the geometry of the arches and fill material on the collapse load estimation. In: Construction and Building Materials, v. 120 (September 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.05.107

  19. Cabaleiro, M. / Lindenbergh, R. / Gard, W. F. / Arias, P. / Van de Kuilen, J. W. G. (2017): Algorithm for automatic detection and analysis of cracks in timber beams from LiDAR data. In: Construction and Building Materials, v. 130 (Januar 2017).

    https://doi.org/10.1016/j.conbuildmat.2016.11.032

  20. Riveiro, B. / Solla, M. / de Arteaga, I. / Arias, P. / Morer, P. (2013): A novel approach to evaluate masonry arch stability on the basis of limit analysis theory and non-destructive geometric characterization. In: Automation in Construction, v. 31 (Mai 2013).

    https://doi.org/10.1016/j.autcon.2012.11.035

  21. Balado, J. / Díaz-Vilariño, L. / Arias, P. / González-Jorge, H. (2018): Automatic classification of urban ground elements from mobile laser scanning data. In: Automation in Construction, v. 86 (Februar 2018).

    https://doi.org/10.1016/j.autcon.2017.09.004

  22. Riveiro, B. / Caamaño, J. C. / Arias, P. / Sanz, E. (2011): Photogrammetric 3D modelling and mechanical analysis of masonry arches: An approach based on a discontinuous model of voussoirs. In: Automation in Construction, v. 20, n. 4 (Juli 2011).

    https://doi.org/10.1016/j.autcon.2010.11.008

  23. Riveiro, B. / Jauregui, D. V. / Arias, P. / Armesto, J. / Jiang, R. (2012): An innovative method for remote measurement of minimum vertical underclearance in routine bridge inspection. In: Automation in Construction, v. 25 (August 2012).

    https://doi.org/10.1016/j.autcon.2012.04.008

  24. Lagüela, S. / Armesto, J. / Arias, P. / Herráez, J. (2012): Automation of thermographic 3D modelling through image fusion and image matching techniques. In: Automation in Construction, v. 27 (November 2012).

    https://doi.org/10.1016/j.autcon.2012.05.011

  25. Balado, J. / Díaz-Vilariño, L. / Arias, P. / Soilán, M. (2017): Automatic building accessibility diagnosis from point clouds. In: Automation in Construction, v. 82 (Oktober 2017).

    https://doi.org/10.1016/j.autcon.2017.06.026

  26. Roca, D. / Lagüela, S. / Díaz-Vilariño, L. / Armesto, J. / Arias, P. (2013): Low-cost aerial unit for outdoor inspection of building façades. In: Automation in Construction, v. 36 (Dezember 2013).

    https://doi.org/10.1016/j.autcon.2013.08.020

  27. Prego, F. J. / Solla, M. / Núñez-Nieto, X. / Arias, P. (2016): Assessing the Applicability of Ground-Penetrating Radar to Quality Control in Tunneling Construction. In: Journal of Construction Engineering and Management, v. 142, n. 5 (Mai 2016).

    https://doi.org/10.1061/(asce)co.1943-7862.0001095

  28. Solla, M. / Caamaño, J. C. / Riveiro, B. / Arias, P. (2012): A novel methodology for the structural assessment of stone arches based on geometric data by integration of photogrammetry and ground-penetrating radar. In: Engineering Structures, v. 35 (Februar 2012).

    https://doi.org/10.1016/j.engstruct.2011.11.004

  29. Armesto, J. / Roca-Pardiñas, Javier / Lorenzo, H. / Arias, P. (2010): Modelling masonry arches shape using terrestrial laser scanning data and nonparametric methods. In: Engineering Structures, v. 32, n. 2 (Februar 2010).

    https://doi.org/10.1016/j.engstruct.2009.11.007

  30. Conde-Carnero, B. / Riveiro, B. / Arias, P. / Caamaño, J. C. (2016): Exploitation of Geometric Data provided by Laser Scanning to Create FEM Structural Models of Bridges. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 3 (Juni 2016).

    https://doi.org/10.1061/(asce)cf.1943-5509.0000807

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine