Georges Aouad 
- (2023): The Development of Soil-Based 3D-Printable Mixtures: A Mix-Design Methodology and a Case Study. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Photocatalytic Activity and Mechanical Properties of Cement Slurries Containing Titanium Dioxide. In: Buildings, v. 13, n. 4 (24 März 2023).
- (2023): Portland/Sulfoaluminate Cement Blends for the Control of Early Age Hydration and Yield Stress. In: Buildings, v. 13, n. 2 (14 Februar 2023).
- (2023): Development of Flash-Calcined Sediment and Blast Furnace Slag Ternary Binders. In: Buildings, v. 13, n. 2 (14 Februar 2023).
- (2022): The Use of Callovo-Oxfordian Argillite as a Raw Material for Portland Cement Clinker Production. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2021): Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments. In: Construction and Building Materials, v. 290 (Juli 2021).
- (2021): Effect of calcium sulfoaluminate cements composition on their durability. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).
- (2021): Sustainable Masonry Blocks: Olive Wood Waste as Substitute for Fine Aggregates. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).
- (2020): Inter-layer reinforcement of 3D printed concrete elements. In: Asian Journal of Civil Engineering, v. 22, n. 2 (Oktober 2020).
- (2022): Influence of the mix composition on the thixotropy of 3D printable mortars. In: Magazine of Concrete Research, v. 74, n. 6 (März 2022).
- (2020): Mechanical assessment of concrete – Steel bonding in 3D printed elements. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Effect of the printing method and mortar’s workability on pull-out strength of 3D printed elements. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2017): Enhance the rheological and mechanical properties of clayey materials by adding starches. In: Construction and Building Materials, v. 139 (Mai 2017).
- (2017): Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2018): Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizer. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
