- Laboratory cracking and interlayer bond strength performance characterization of full-scale accelerated geosynthetic reinforced asphalt concrete. In: Construction and Building Materials, v. 420 (März 2024). (2024):
- Laboratory performance characterization of polyolefin/ aramid fibers and synthetic aramid fibers reinforced asphalt mixtures. In: Construction and Building Materials, v. 419 (März 2024). (2024):
- Understanding the Storage Stability of Polyethylene Modified Binders: A Laboratory Case Study Using Waste Plastics. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024). (2024):
- Estimating tensile strength ratio of asphalt mixtures using Surface Free Energy (SFE) and Fourier Transform Infrared Attenuated Total Reflectance (FTIR-ATR). In: Construction and Building Materials, v. 409 (Dezember 2023). (2023):
- Evaluation of the impact of nanomodification on Self-Healing behavior of asphalt binders. In: Construction and Building Materials, v. 405 (November 2023). (2023):
- Compactability and Performance of Warm-Mix Additives at Lower Than Traditional Compaction Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023). (2023):
- Storage Stability and Performance Assessment of Styrene-Butadiene-Styrene: Waste Polyethylene–Modified Binder Using Waste Cooking Oil. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023). (2023):
- Assessment of the impact of binder grade on the laboratory performance of fiber reinforced asphalt mixtures. In: Construction and Building Materials, v. 401 (Oktober 2023). (2023):
- Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent. In: Construction and Building Materials, v. 345 (August 2022). (2022):
- Evaluating the impact of fiber type and dosage rate on laboratory performance of Fiber-Reinforced asphalt mixtures. In: Construction and Building Materials, v. 310 (Dezember 2021). (2021):
- Evaluating the potential of using foamed concrete as the insulation layer for pavements in cold regions. In: Construction and Building Materials, v. 341 (Juli 2022). (2022):
- Evaluation of cracking performance of fiber reinforced and polymer enhanced microsurfacing mixtures using conventional asphalt laboratory testing. In: Construction and Building Materials, v. 307 (November 2021). (2021):
- Economic and Environmental Cost Analysis of Cold In-Place Recycling. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021). (2021):
- Evaluating the laboratory cracking performance of pavement preservation materials using the Texas overlay tester. In: Construction and Building Materials, v. 262 (November 2020). (2020):
- Impact of Additives on Low-Temperature Cracking Properties of Soft Binders Used in Cold Regions. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (Oktober 2020). (2020):
- Effect of rejuvenator types and mixing procedures on volumetric properties of asphalt mixtures with 50% RAP. In: Construction and Building Materials, v. 218 (September 2019). (2019):
- Workability Evaluation of Foamed Warm-Mix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 6 (Juni 2014). (2014):
- Effect of temperature reduction, foaming water content, and aggregate moisture content on performance of foamed warm mix asphalt. In: Construction and Building Materials, v. 48 (November 2013). (2013):