Zhengtao Ai 
- (2025): Indoor environmental quality and subjective perceptions in multi-chair dental offices. In: Building and Environment, v. 267 (Januar 2025).
- (2025): A new personalized environment control system for hospital beds with design optimization by Taguchi-based grey relational analysis. In: Building and Environment, v. 267 (Januar 2025).
- (2024): Co-flow jets application for occupant targeted ventilation: Focus on thermal comfort and air quality. In: Building and Environment, v. 266 (Dezember 2024).
- (2024): Impact of personal protective equipment on wearer's health indicators using multi-parameter physiological monitoring. In: Building and Environment, v. 263 (September 2024).
- (2024): Micro-environment inside disposable medical protective clothing and its improvement. In: Building and Environment, v. 258 (Juni 2024).
- (2024): Design of convertible patient care unit for both non-pandemic and pandemic times: Prototype, building spatial layout, and ventilation design. In: Building and Environment, v. 258 (Juni 2024).
- (2024): Improving inactivation performance of in-duct ultraviolet germicidal irradiation system with ribbed duct walls by optimizing UVC distribution. In: Building and Environment, v. 259 (Juli 2024).
- (2024): A new ventilation performance index considering relative changes in environmental parameters: A numerical study. In: Journal of Building Engineering, v. 94 (Oktober 2024).
- (2024): Effectiveness of respiratory protective equipment on source control of exhaled pollutants. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Coincident design day application method for indoor design cooling load calculation under atypical exterior wall situations. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Improving the CFD predictive accuracy of particle fate in turbulent duct flows: Four key issues and applications in in-duct UVGI system. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2024): Characteristics of droplets emission immediately around mouth during dental treatments. In: Building and Environment, v. 248 (Januar 2024).
- (2023): Aerosol transmission in queuing and dining scenarios in canteens and the effectiveness of control measures. In: Journal of Building Performance Simulation, v. 16, n. 6 (April 2023).
- (2023): A cost-effectiveness assessment of the operational parameters of central HVAC systems during pandemics. In: Building Simulation, v. 16, n. 5 (März 2023).
- (2023): Cross-infection risk assessment in dental clinic: Numerical investigation of emitted droplets during different atomization procedures. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Accurate evaluation of inhalation exposure based on CFD predicted concentration in the breathing zone towards personalized and smart control. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Air infiltration and related building energy consumption: A case study of office buildings in Changsha, China. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Investigation of convective heat transfer at the facade with balconies for a multi-story building. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Airborne transmission of exhaled pollutants during short-term events: Quantitatively assessing inhalation monitor points. In: Building and Environment, v. 223 (September 2022).
- (2022): Airborne transmission during short-term events: Direct route over indirect route. In: Building Simulation, v. 15, n. 12 (August 2022).
- (2022): Comprehensive clustering method to determine coincident design day for air-conditioning system design. In: Building and Environment, v. 216 (Mai 2022).
- (2022): Face shield intensifies inhaled exposure to self-generated bio-effluents. In: Building and Environment, v. 217 (Juni 2022).
- (2021): A new possible route of airborne transmission caused by the use of a physical partition. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Numerical comparison of the efficiency of mixing ventilation and impinging jet ventilation for exhaled particle removal in a model intensive care unit. In: Building and Environment, v. 200 (August 2021).
- (2018): The influence of envelope features on interunit dispersion around a naturally ventilated multi-story building. In: Building Simulation, v. 11, n. 6 (September 2018).
- (2021): Occupancy-aided ventilation for both airborne infection risk control and work productivity. In: Building and Environment, v. 188 (Januar 2021).
- (2019): Flow and dispersion in coupled outdoor and indoor environments: Issue of Reynolds number independence. In: Building and Environment, v. 150 (März 2019).
- (2019): Effects of operation parameters on performances of stratum ventilation for heating mode. In: Building and Environment, v. 148 (Januar 2019).
- (2018): Evaluation of computational and physical parameters influencing CFD simulations of pollutant dispersion in building arrays. In: Building and Environment, v. 137 (Juni 2018).
- (2017): New criteria for assessing low wind environment at pedestrian level in Hong Kong. In: Building and Environment, v. 123 (Oktober 2017).
Structurae kooperiert mit
