0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Antti Ahola ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Björk, Timo / Ahola, Antti / Kukkonen, Olavi (2024): On the out-of-plane buckling of RHS X-joints – Analytical and numerical approaches. In: Journal of Constructional Steel Research, v. 220 (September 2024).

    https://doi.org/10.1016/j.jcsr.2024.108836

  2. Raftar, Hamidreza Rohani / Ghanadi, Mehdi / Hultgren, Gustav / Ahola, Antti / Barsoum, Zuheir / Björk, Timo (2024): Assessing local stresses in scanned fillet weld geometry using bagged decision trees. In: Journal of Constructional Steel Research, v. 218 (Juli 2024).

    https://doi.org/10.1016/j.jcsr.2024.108745

  3. Ahola, Antti / Savolainen, Janne / Brask, Lari / Björk, Timo (2024): Fatigue enhancement of welded thin-walled tubular joints made of lean duplex steel. In: Journal of Constructional Steel Research, v. 218 (Juli 2024).

    https://doi.org/10.1016/j.jcsr.2024.108738

  4. Raftar, Hamidreza Rohani / Ahola, Antti / Lipiäinen, Kalle / Björk, Timo (2024): Fatigue behavior of load-carrying cruciform fillet weld joints under variable amplitude load. In: Journal of Constructional Steel Research, v. 215 (April 2024).

    https://doi.org/10.1016/j.jcsr.2024.108559

  5. Alshawwa, Omar / Mela, Kristo / Ahola, Antti / Björk, Timo (2023): Experiments on Welded High Strength Steel S700 K‐joints. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2267

  6. Neuvonen, Riku / Peltoniemi, Teemu / Skriko, Tuomas / Ghafouri, Mehran / Amraei, Mohsen / Ahola, Antti / Björk, Timo (2023): The effects of geometric and metallurgical constraints on ultra-high strength steel weldments. In: Structures, v. 56 (Oktober 2023).

    https://doi.org/10.1016/j.istruc.2023.104900

  7. Riski, Jani / Ahola, Antti / Skriko, Tuomas / Björk, Timo (2023): Low-cycle fatigue in ultra-high-strength steel welded joints in the as-welded and post-weld-treated conditions. In: Advances in Structural Engineering, v. 26, n. 12 (Juni 2023).

    https://doi.org/10.1177/13694332231178977

  8. Raftar, Hamidreza Rohani / Ahola, Antti / Lipiäinen, Kalle / Björk, Timo (2023): Simulation and experiment on residual stress and deflection of cruciform welded joints. In: Journal of Constructional Steel Research, v. 208 (September 2023).

    https://doi.org/10.1016/j.jcsr.2023.108023

  9. Ahola, Antti / Björk, Timo (2023): Fatigue strength assessment of welded joints in the marine environment. A case study on the applications of local stress and fracture mechanics methods for analyzing non-load-carrying fillet-welded joints. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 56, n. 1 (2 Mai 2023).

    https://doi.org/10.23998/rm.124670

  10. Ahola, Antti / Afkhami, Shahriar / Lipiäinen, Kalle / Björk, Timo (2022): Ultimate capacity of SHS X-joints made of normal and high-strength weathering steels. In: Journal of Constructional Steel Research, v. 198 (November 2022).

    https://doi.org/10.1016/j.jcsr.2022.107533

  11. Björk, Timo / Tuominen, Niko Petteri / Ahola, Antti (2017): X-liitoksen vinoutumisnurjahdus. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 50, n. 3 (August 2017).

    https://doi.org/10.23998/rm.65172

  12. Yanchukovich, Alexei / Ahola, Antti / Björk, Timo (2019): Moniaksiaalisen kuormitushistorian ääriarvopistedatan sykliluokitus Wang-Brown-menetelmän avulla. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 52, n. 2 (Juli 2019).

    https://doi.org/10.23998/rm.75618

  13. Amraei, Mohsen / Zong, Lingjia / Ahola, Antti / Björk, Timo (2019): Bonded CFRP to high strength steels. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 52, n. 4 (Dezember 2019).

    https://doi.org/10.23998/rm.76267

  14. Ghafouri, Mehran / Ahola, Antti / Ahn, Joseph / Björk, Timo (2022): Numerical and experimental investigations on the welding residual stresses and distortions of the short fillet welds in high strength steel plates. In: Engineering Structures, v. 260 (Juni 2022).

    https://doi.org/10.1016/j.engstruct.2022.114269

  15. Lipiäinen, Kalle / Afkhami, Shahriar / Ahola, Antti / Björk, Timo (2022): Evaluation of geometrical notch and quality effects in the fatigue strength assessment of ultra-high-strength steel cut edges. In: Structures, v. 37 (März 2022).

    https://doi.org/10.1016/j.istruc.2022.01.069

  16. Ahola, Antti / Lipiäinen, Kalle / Afkhami, Shahriar / Lilja, Heikki / Björk, Timo (2022): Fatigue performance of the welded details of an old, demolished steel railway bridge. In: Engineering Structures, v. 256 (April 2022).

    https://doi.org/10.1016/j.engstruct.2022.113966

  17. Lipiäinen, Kalle / Ahola, Antti / Virolainen, Esa / Hirvi, Ari / Björk, Timo (2022): Fatigue strength of hot-dip galvanized S960 cut edges and longitudinal welds. In: Journal of Constructional Steel Research, v. 189 (Februar 2022).

    https://doi.org/10.1016/j.jcsr.2021.107083

  18. Ghafouri, Mehran / Ahola, Antti / Ahn, Joseph / Björk, Timo (2022): Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study. In: Journal of Constructional Steel Research, v. 189 (Februar 2022).

    https://doi.org/10.1016/j.jcsr.2021.107088

  19. Ahola, Antti / Skriko, Tuomas / Lipiäinen, Kalle / Björk, Timo (2021): On the weld root fatigue strength and improvement techniques for non-load-carrying transverse attachment joints with single-sided fillet welds and made of mild and ultra-high-strength steels. In: Engineering Structures, v. 249 (Dezember 2021).

    https://doi.org/10.1016/j.engstruct.2021.113373

  20. Skriko, Tuomas / Lipiäinen, Kalle / Ahola, Antti / Mettänen, Heli / Björk, Timo (2021): Fatigue strength of longitudinal load-carrying welds in beams made of ultra-high-strength steel. In: Journal of Constructional Steel Research, v. 179 (April 2021).

    https://doi.org/10.1016/j.jcsr.2021.106563

  21. Amraei, Mohsen / Ahola, Antti / Afkhami, Shahriar / Björk, Timo / Heidarpour, Amin / Zhao, Xiao-Ling (2019): Effects of heat input on the mechanical properties of butt-welded high and ultra-high strength steels. In: Engineering Structures, v. 198 (November 2019).

    https://doi.org/10.1016/j.engstruct.2019.109460

  22. Lipiäinen, Kalle / Ahola, Antti / Skriko, Tuomas / Björk, Timo (2021): Fatigue strength characterization of high and ultra-high-strength steel cut edges. In: Engineering Structures, v. 228 (Februar 2021).

    https://doi.org/10.1016/j.engstruct.2020.111544

  23. Björk, Timo / Ahola, Antti / Tuominen, Niko (2019): Distortional buckling of X-joints made of square hollow cross-section beams: theoretical energy-based model. In: Steel Construction, v. 12, n. 1 (Februar 2019).

    https://doi.org/10.1002/stco.201800002

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine