Hamid Ahmadi 
- (2024): Effect of internal pressure on the flexural fatigue behaviour of trenchless internal replacement pipe systems. In: Tunnelling and Underground Space Technology, v. 154 (Dezember 2024).
- : Linear and nonlinear axial behaviour of internal replacement pipe systems for pipeline rehabilitation. In: Structure and Infrastructure Engineering.
- (2015): Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures. In: Thin-Walled Structures, v. 91 (Juni 2015).
- (2016): Static strength of doubler plate reinforced tubular T/Y-joints subjected to brace compressive loading: Study of geometrical effects and parametric formulation. In: Thin-Walled Structures, v. 107 (Oktober 2016).
- (2016): Static strength of offshore tubular T/Y-joints reinforced with collar plate subjected to tensile brace loading. In: Thin-Walled Structures, v. 103 (Juni 2016).
- (2016): Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads. In: Thin-Walled Structures, v. 99 (Februar 2016).
- (2016): Static performance of doubler plate reinforced tubular T/Y-joints subjected to brace tension. In: Thin-Walled Structures, v. 108 (November 2016).
- (2016): The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads. In: Thin-Walled Structures, v. 106 (September 2016).
- (2017): Static capacity of tubular X-joints reinforced with collar plate subjected to brace compression. In: Thin-Walled Structures, v. 119 (Oktober 2017).
- (2012): The development of fatigue design formulas for the outer brace SCFs in offshore three-planar tubular KT-joints. In: Thin-Walled Structures, v. 58 (September 2012).
- (2024): Temperature change-induced linear and nonlinear axial responses of internal replacement pipe (IRP) systems for pipeline rehabilitation incorporating the effects of soil friction. In: Structures, v. 62 (April 2024).
- (2024): Bending fatigue behaviour of internal replacement pipe systems. In: Composite Structures, v. 331 (März 2024).
- (2023): Lateral deformation behaviour of structural internal replacement pipe repair systems. In: Composite Structures, v. 319 (September 2023).
- (2017): Stress softening behaviour of HDNR bearings: modelling and influence on the seismic response of isolated structures. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 12 (10 Oktober 2017).
- (2022): Cyclic shear behaviour of masonry triplets with rubber joints. In: Construction and Building Materials, v. 351 (Oktober 2022).
- (2021): Numerical modelling of reinforced concrete frames with masonry infills and rubber joints. In: Engineering Structures, v. 246 (November 2021).
- (2020): Local Buckling Analysis of Cold-Formed Steel Webs with Rectangular Openings. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 44 (Oktober 2020).
- (2020): Local buckling analysis of cold-formed steel webs with stiffened rectangular openings. In: Journal of Constructional Steel Research, v. 167 (April 2020).
- (2013): Chord-side SCF distribution of central brace in internally ring-stiffened tubular KT-joints: A geometrically parametric study. In: Thin-Walled Structures, v. 70 (September 2013).
- (2011): Geometrical effect on SCF distribution in uni-planar tubular DKT-joints under axial loads. In: Journal of Constructional Steel Research, v. 67, n. 8 (August 2011).
- (2012): Geometrically parametric study of central brace SCFs in offshore three-planar tubular KT-joints. In: Journal of Constructional Steel Research, v. 71 (April 2012).
- (2016): Structural behavior of tubular T/Y-joints with collar plate under static in-plane bending. In: Journal of Constructional Steel Research, v. 123 (August 2016).
- (2016): Static strength of collar plate reinforced tubular T/Y-joints under brace compressive loading. In: Journal of Constructional Steel Research, v. 119 (März 2016).
- (2017): Static strength of doubler plate reinforced tubular T/Y-joints under in-plane bending load. In: Journal of Constructional Steel Research, v. 136 (September 2017).
- (2015): Probabilistic Assessment of Degree of Bending in Tubular X-Joints of Offshore Structures Subjected to Bending Loads. In: Advances in Civil Engineering, v. 2015 ( 2015).
- (2018): Static strength of axially loaded tubular KT-joints at elevated temperatures: Study of geometrical effects and parametric formulation. In: Marine Structures, v. 61 (September 2018).
- (2017): Investigation on the effect of geometrical and geotechnical parameters on elongated offshore piles using fuzzy inference systems. In: China Ocean Engineering, v. 31, n. 3 (Juni 2017).
- (2018): Biaxial shear behaviour of HDNR with Mullins effect and deformation-induced anisotropy. In: Engineering Structures, v. 154 (Januar 2018).
- (2019): Development of a probability distribution model for the LJF factors in offshore two-planar tubular DK-joints subjected to OPB moment loading. In: Marine Structures, v. 63 (Januar 2019).
- (2019): Effects of geometrical parameters on the degree of bending (DoB) in two-planar tubular DT-joints of offshore jacket structures subjected to axial and bending loads. In: Marine Structures, v. 64 (März 2019).
Structurae kooperiert mit
