0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

S. Adali ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Sewnath, K. / Drosopoulos, G. / Adali, S. (2023): Buckling of woven fibre and graphene platelet reinforced nanocomposite laminates. In: Structures, v. 56 (Oktober 2023).

    https://doi.org/10.1016/j.istruc.2023.104893

  2. Jeawon, Y. / Drosopoulos, G. A. / Foutsitzi, G. / Stavroulakis, G. E. / Adali, S. (2021): Optimization and analysis of frequencies of multi-scale graphene/fibre reinforced nanocomposite laminates with non-uniform distributions of reinforcements. In: Engineering Structures, v. 228 (Februar 2021).

    https://doi.org/10.1016/j.engstruct.2020.111525

  3. Adali, S. (1984): Design of shear-deformable antisymmetric angle-ply laminates to maximize the fundamental frequency and frequency separation. In: Composite Structures, v. 2, n. 4 ( 1984).

    https://doi.org/10.1016/0263-8223(84)90005-9

  4. Duffy, K. J. / Adali, S. (1990): Design of antisymmetric hybrid laminates for maximum buckling load: II. Optimal layer thickness. In: Composite Structures, v. 14, n. 2 ( 1990).

    https://doi.org/10.1016/0263-8223(90)90026-b

  5. Adali, S. / Duffy, K. J. (1990): Design of antisymmetric hybrid laminates for maximum buckling load: I. Optimal fibre orientation. In: Composite Structures, v. 14, n. 1 ( 1990).

    https://doi.org/10.1016/0263-8223(90)90058-m

  6. Adali, S. / Summers, E. B. / Verijenko, V. E. (1993): Optimisation of laminated cylindrical pressure vessels under strength criterion. In: Composite Structures, v. 25, n. 1-4 ( 1993).

    https://doi.org/10.1016/0263-8223(93)90177-r

  7. Adali, S. / Summers, E. B. / Verijenko, V. E. (1994): Minimum weight and deflection design of thick sandwich laminates via symbolic computation. In: Composite Structures, v. 29, n. 2 ( 1994).

    https://doi.org/10.1016/0263-8223(94)90096-5

  8. Adali, S. / Richter, A. / Verijenko, V. E. / Summers, E. B. (1995): Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost. In: Composite Structures, v. 32, n. 1-4 ( 1995).

    https://doi.org/10.1016/0263-8223(95)00067-4

  9. Adali, S. / Walker, M. / Verijenko, V. E. (1996): Multiobjective optimization of laminated plates for maximum prebuckling, buckling and postbuckling strength using continuous and discrete ply angles. In: Composite Structures, v. 35, n. 1 ( 1996).

    https://doi.org/10.1016/0263-8223(96)00030-x

  10. Birman, V. / Adali, S. (1996): Vibration damping using piezoelectric stiffener-actuators with application to orthotropic plates. In: Composite Structures, v. 35, n. 3 ( 1996).

    https://doi.org/10.1016/0263-8223(96)00011-6

  11. Stewart, R. W. / Verijenko, V. E. / Adali, S. (1997): Analysis of the in-plane properties of hybrid glass/carbon woven fabric composites. In: Composite Structures, v. 39, n. 3-4 ( 1997).

    https://doi.org/10.1016/s0263-8223(97)00125-6

  12. Adali, S. / Richter, A. / Verijenko, V. E. (1997): Optimization of shear-deformable laminated plates under buckling and strength criteria. In: Composite Structures, v. 39, n. 3-4 ( 1997).

    https://doi.org/10.1016/s0263-8223(97)00111-6

  13. Tauchert, T. R. / Ashida, F. / Noda, N. / Adali, S. / Verijenko, V. (2000): Developments in thermopiezoelasticity with relevance to smart composite structures. In: Composite Structures, v. 48, n. 1-3 (Januar 2000).

    https://doi.org/10.1016/s0263-8223(99)00070-7

  14. Adali, S. / Verijenko, V. E. (2001): Optimum stacking sequence design of symmetric hybrid laminates undergoing free vibrations. In: Composite Structures, v. 54, n. 2-3 (November 2001).

    https://doi.org/10.1016/s0263-8223(01)00080-0

  15. Sadek, I. S. / Bruch, J. C. / Sloss, J. M. / Adali, S. (2003): Feedback control of vibrating plates using piezoelectric patch sensors and actuators. In: Composite Structures, v. 62, n. 3-4 ( 2003).

    https://doi.org/10.1016/j.compstruct.2003.09.011

  16. Adali, S. / Léné, F. / Duvaut, G. / Chiaruttini, V. (2003): Optimization of laminated composites subject to uncertain buckling loads. In: Composite Structures, v. 62, n. 3-4 ( 2003).

    https://doi.org/10.1016/j.compstruct.2003.09.024

  17. Sloss, J. M. / Bruch, J. C. / Sadek, I. S. / Adali, S. (2003): Piezo patch sensor/actuator control of the vibrations of a cantilever under axial load. In: Composite Structures, v. 62, n. 3-4 ( 2003).

    https://doi.org/10.1016/j.compstruct.2003.09.015

  18. Adali, S. / Sadek, I. S. / Bruch, J. C. / Sloss, J. M. (2003): Orthotropic piezoelectric patches for control of symmetric laminates via an integral equation. In: Composite Structures, v. 62, n. 3-4 ( 2003).

    https://doi.org/10.1016/j.compstruct.2003.09.025

  19. Wuite, J. / Adali, S. (2005): Deflection and stress behaviour of nanocomposite reinforced beams using a multiscale analysis. In: Composite Structures, v. 71, n. 3-4 (Dezember 2005).

    https://doi.org/10.1016/j.compstruct.2005.09.011

  20. Gbadeyan, O. J. / Adali, S. / Bright, G. / Sithole, B. / Awogbemi, O. (2020): Studies on the mechanical and absorption properties of achatina fulica snail and eggshells reinforced composite materials. In: Composite Structures, v. 239 (Mai 2020).

    https://doi.org/10.1016/j.compstruct.2020.112043

  21. Verijenko, V. E. / Summers, E. B. / Adali, S. / Walker, M. (1998): Minimum stress design of transversely isotropic sandwich plates based on higher-order theory. In: Structural Optimization, v. 15, n. 3-4 (Juni 1998).

    https://doi.org/10.1007/bf01278497

  22. Adali, S. / Richter, A. / Verijenko, V. E. (1995): Minimum weight design of symmetric angle-ply laminates under multiple uncertain loads. In: Structural Optimization, v. 9, n. 3-4 (Juli 1995).

    https://doi.org/10.1007/bf01758825

  23. Adali, S. (1983): Pareto optimal design of beams subjected to support motions. In: Computers & Structures, v. 16, n. 1-4 (Januar 1983).

    https://doi.org/10.1016/0045-7949(83)90169-4

  24. Verijenko, V. E. / Adali, S. / Piskunov, V. G. (1995): Finite elements based on shear and normal deformation theory for the analysis of laminated composite plates. In: Computers & Structures, v. 54, n. 5 (März 1995).

    https://doi.org/10.1016/0045-7949(94)00383-e

  25. Walker, M. / Reiss, T. / Adali, S. (1997): Multiobjective design of laminated cylindrical shells for maximum torsional and axial buckling loads. In: Computers & Structures, v. 62, n. 2 (Januar 1997).

    https://doi.org/10.1016/s0045-7949(96)00189-7

  26. Walker, M. / Adali, S. / Verijenko, V. (1996): Optimization of symmetric laminates for maximum buckling load including the effects of bending-twisting coupling. In: Computers & Structures, v. 58, n. 2 (Januar 1996).

    https://doi.org/10.1016/0045-7949(95)00138-7

  27. Bruch, J. C. / Adali, S. / Sloss, J. M. / Sadek, I. S. (1990): Optimal design and control of a cross-ply laminate for maximum frequency and minimum dynamic response. In: Computers & Structures, v. 37, n. 1 (Januar 1990).

    https://doi.org/10.1016/0045-7949(90)90200-l

  28. Adali, S. / Richter, A. / Verijenko, V. E. (1995): Multiobjective Design of Laminated Cylindrical Shells for Maximum Pressure and Buckling Load. In: Computer-Aided Civil and Infrastructure Engineering, v. 10, n. 4 (Juli 1995).

    https://doi.org/10.1111/j.1467-8667.1995.tb00289.x

  29. Bruch, J. C. / Sloss, J. M. / Adali, S. / Sadek, I. S. (2000): Optimal piezo-actuator locations/lengths and applied voltage for shape control of beams. In: Smart Materials and Structures, v. 9, n. 2 (April 2000).

    https://doi.org/10.1088/0964-1726/9/2/311

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine