Construction and Building Materials - December 2023

Published:	December 2023

Articles in this Issue

Author(s)	Title	Page(s)
Gómez-Casero, M. A. / Calado, Luís / Romano, Pedro / Eliche-Quesada, D.	Acorn gasification char valorisation in the manufacture of alkali activated materials	133533
Shanmugasundaram, N. / Praveenkumar, S.	Adhesive characteristics of novel greener engineered cementitious composite with conventional concrete substrate	133591
Zhang, Wenbing / Shi, Danda / Shen, Zhenzhong / Zhang, Jiao / Shao, Wei / Li, Hanhan / Zhao, Shan / Li, Qingming / Cao, Rong	An approach for quantifying the calcium leaching effect on service performance of concrete cutoff wall of embankment dams	133489
Hasan, Noor Md. Sadiqul / Shaurdho, Nur Mohammad Nazmus / Basit, Md. Abdul / Chandra Paul, Suvash / Sobuz, Md. Habibur Rahman / Miah, Md Jihad	Assessment of the rheological and mechanical properties of palmyra fruit mesocarp fibre reinforced eco-friendly concrete	133530
Li, Lingyu / Ma, Haiyan / Yu, Hongfa / Zhang, Jinhua / Cheng, Ming / Wu, Zhangyu / Yan, Jun / Zhang, Lifang / Fan, Haotian / Wang, Fang	Attack resistance mechanism, uniaxial compressive mechanical properties and meso-simulation of high-performance concrete exposed to brine in salt lake for 10 years	133520
Jiang, Wei / Zhang, Xue Gang / Zhang, Yi / Han, Dong / Xie, Yi Min / Ren, Xin	Auxetic frame with programmable strength and stiffness: Design, investigation and perspective	133478
Tripura, Deb Dulal / Kasinikota, Pardhasaradhi	Axial load behavior of unreinforced and reinforced hollow interlocking compressed stabilized earth block masonry walls	133451
Chen, Peiyuan / Wang, Cheng / Fang, Yi / Li, Jin / Xu, Ying / Gu, Zhicheng / Wang, Jialai	Bio-inspired functionalization of crumb rubber using polydopamine to enhance the performance of rubberized mortars	133550
Hou, Lijun / Sun, Hui / Liu, Gengsheng / Huang, Ting / Chen, Da	Bond strength of deformed reinforcement embedded in steel fiber reinforced concrete: Influencing factors and prediction model	133436
Chen, Xiao / Yang, Yin / Zhang, Haoyu / Du, Xinyu / Chen, Lishun / Zhao, Qinglin / Li, Beixing	Brick-concrete recycled aggregate/powder synergistic preparation of pervious concrete	133517
Di, Hongfeng / Guan, Xuemao / Liu, Songhui	Changes in mechanical performance and pore structure of hardened cement paste under the combined effect of calcium leaching and dry/wet cycles	133519
Dang, Juntao / Song, Caihong / Qiao, Min / Li, Guo / Dong, Shulin / Fan, Fujun / Lv, Yajun	Characteristics analysis of long afterglow phosphor with SiO2 coating and evaluation its influence on the properties of self-luminescent cement-based materials	133402
Bhat, Zeeshan Manzoor / Singh, Yogendra / Agarwal, Pankaj	Characterization of mechanical behavior of different types of masonry with a detailed investigation of full-field strain using digital image correlation	133502
He, Huan / Zhang, Chen / Yang, Jiahao / Li, Man / Fu, Wei / Senetakis, Kostas / Zhang, Dingwen / Liu, Songyu	Characterization of recycled concrete aggregate (RCA) particles for geotechnical engineering applications: Particle strength and interparticle contact behavior	133532
Masi, Giulia / Dal Pozzo, Alessandro / Ugolotti, Greta / Tugnoli, Alessandro / Sassoni, Enrico	Choosing the consolidant for carbonate substrates: Technical performance and environmental sustainability of selected inorganic and organic products	133599
Ul Arifeen, Siyab / Amin, Muhammad Nasir / Ahmad, Waqas / Althoey, Fadi / Ali, Mujahid / Alotaibi, Badr Saad / Abuhussain, Mohammed Awad	A comparative study of prediction models for alkali-activated materials to promote quick and economical adaptability in the building sector	133485
Zajac, Maciej / Song, Jiayi / Skocek, Jan / Ben Haha, Mohsen / Skibsted, Jørgen	Composite cements with aqueous and semi-dry carbonated recycled concrete pastes	133362
Adresi, Mostafa / Yamani, Alireza / Karimaei Tabarestani, Mojtaba / Rooholamini, Hamed	A comprehensive review on pervious concrete	133308
Torkan, Azam / Hejazi, Sayyed Mahdi / Abtahi, Sayyed Mahdi / Shayannejad, Mohammad	Design and fabrication of fibrous media to facilitate autogenous smart self-healing properties in cracked-cementitious structures using polyethylene glycol (PEG) and silicon dioxide nanoparticles	133518
Jia, Ruiquan / Wang, Qiang / Luo, Ting	Deterioration and mitigation of efflorescence of alkali-activated phosphorus slag	133500
Suryanto, B. / Higgins, J. / Aitken, M. W. / Tambusay, A. / Suprobo, P.	Developments in Portland cement/GGBS binders for 3D printing applications: Material calibration and structural testing	133561
Doussang, Lola / Samson, Gabriel / Deby, Fabrice / Huet, Bruno / Guillon, Emmanuel / Cyr, Martin	Durability parameters of three low-carbon concretes (low clinker, alkali-activated slag and supersulfated cement)	133511
Al-Ameen, Eeman / Blanco, Ana / Cavalaro, Sergio	Durability, permeability, and mechanical performance of sprayed UHPC, as an attribute of fibre content and geometric stability	133393
Gupta, Sanjoli / Kumar, Suresh	Dynamic behavior of geopolymer stabilized kaolin clay under long-term cyclic loading	133562
Bayrak, Barış / Çelebi, Oğuzhan / Öz, Ali / Ustabas, Ilker / Kaplan, Gökhan / Aydın, Abdulkadir Cüneyt	Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands	133596
Mohd Ghazali, Mohd Fahmi Haikal / Mohd Hasan, Mohd Rosli / Abu Seman, Anasyida / Salleh, Abdul Hakim / Mukhtar, Najib / Osman, Hanizah / Uwanuakwa, Ikenna D.	The effect of corrosion on the capability of asphalt mortar to induce healing via microwave heating system	133495
Cao, Zhilong / Yu, Jianying / Yi, Juan / Sun, Guoqiang / Qiu, Kexin / Xu, Song / Han, Xiaobin	Effect of different rejuvenation methods on the fatigue behavior of aged SBS modified asphalt	133494
Gu, Zhicheng / Wang, Yuxuan / Chen, Peiyuan / Wang, Yonghui / Xie, Jiankai / Zhao, Cheng / Wang, Xianggeng	Effect of fly ash modified plastic particles using heat welding method on performance and interface modification mechanism of mortars	133481
Wu, Di / Dong, Xiaoye / Xiao, Xiaochun / Sun, Weiji / Miao, Feng / Zhai, Wenbo	Effect of the gradation of binary mixed particle materials on compressive strength and permeability	133526
Manjari, T. / Manoharan, V. / Ramamurthy, K.	Effective utilization of mine overburden soil in producing aggregates by pelletization and sintering	133408
Romanazzi, A. / Oliveira, D. V. / Silva, R. A. / Barontini, A.	Effectiveness of a TRM solution for rammed earth under in-plane cyclic loads	133551
Dai, Jiasheng / Ma, Feng / Fu, Zhen / Liu, Jenny / Li, Chen / Hou, Yingjie / Wu, Hanli	Effectiveness of the different eutectic phase-change materials in cooling asphalt pavement	133491
Ma, Panpan / An, Xin / Wang, Feibin / Huang, Hui / Chen, Zhiyuan / Wang, Shuo / Gong, Meng / Que, Zeli	Effects of pre-heating treatment parameters on dimensional stability and mechanical properties of densified Chinese fir	133484
He, Zhengshu / He, Chuan / Kang, Xiaoyue / Huang, Xing / Wang, Shimin / Xu, Guowen	Effects of sustained load and reinforcement spacing on the evolution and spatial characteristics of corrosion damages in RC segmental specimens	133462
Wang, Xin / Hu, Xiang / Chong, Linlin / Yang, Jianming / Shi, Caijun	Effects of the combination of NH4H2PO4 and KH2PO4 on the interfacial bond between magnesium phosphate cement and steel fiber	133405
EL Achrafi, Mohamad Khodor / Bonnet, Stéphanie / Villain, Géraldine	Electrical resistivity tomography results analyzed with two inversion methods to determine chloride profiles on BFS concrete having very high electrical resistivity	133361
Afgan, Sher / Kiran, Ravi / Qi, Xiaoning / Bajwa, Dilpreet S.	Enhancement of corrosion resistance and bond strength in rebars employing abrasives-infused soy-protein isolate coatings	133455
Sim, Sungwon / Hoon Rhee, Jeong / Oh, Jae-eun / Kim, Gun	Enhancing the durability performance of thermally damaged concrete with ground-granulated blast furnace slag and fly ash	133538
Majdoubi, H. / Haddaji, Y. / Bourzik, O. / Nadi, M. / Ziraoui, J. / Alomayri, T. S. / Oumam, M. / Manoun, B. / Alami, J. / Tamraoui, Y. / Hannache, H.	Enhancing thermal insulation with phosphate washing sludge waste as an inorganic foaming agent in porous acid-based geopolymers: Formulation and processing optimization	133486
Candelaria, Ma. Doreen E. / Kee, Seong-Hoon	Evaluation of thermal damages of concrete subjected to high temperatures using recurrent neural networks for ultrasonic pulse waves	133416
Yao, Tianshuai / Tian, Qing / Zhang, Miao / Qi, Shuai / Wang, Cheng / Ruan, Mengyue / Xu, Gelong / Cai, Jiwei	Experimental research on the preparation and properties of foamed concrete using recycled waste concrete powder	133370
Rui, Aoyu / Wang, Li / Lin, Wenyu / Ma, Guowei	Experimental study on damage anisotropy of 3D-printed concrete exposed to sulfate attack	133590
Alnahhal, Ahmed Mahmoud / Alengaram, U. Johnson / Ibrahim, Muhammad Shazril Idris / Radwan, Mohammed K. H. / Ayough, Pouria	Extraction of home brewed sodium silicate from palm oil fuel ash and its effect on alkali activated materials	133440
Zhu, Zhiwen / Abdelbaset, Hesham / Li, Xianghong / Tang, Qin	Flexural behavior of long-term loaded RC beams strengthened by ultra-high performance concrete	133428
Vega-Pava, Oscar / Torrente-Prato, Gabriel	Flexural strength increases of concrete with AISI 4140 steel chip as reinforcement	133512
Alarrak, Rashed / Jeon, Byeonguk / Brand, Alexander S.	Flexural toughness of extruded fiber-reinforced mortar with preferentially aligned fibers	133528
Dong, Liang / Zhang, Shaohua / Gan, Tiansiyu / Qiu, Yan / Song, Qinfeng / Zhao, Yongtao	Frequency characteristics analysis of pipe-to-soil potential under metro stray current interference using continuous wavelet transform method	133453
Nakai, Fumiaki / Ishida, Takato	Gas diffusion in cement pastes: An analysis using a fluctuating diffusivity model	133411
David Unobe, Ikwulono / Ni, Shuna	Impact of vehicle fire exposure on polymer concrete overlays	133284
Kumar, Dhanendra / Mi, Tangwei / Yang, En-Hua	Improving the material sustainability of strain-hardening magnesium-silicate-hydrate composite by incorporating aggregates	133576
Cardoso, Josué / Ferreira, Adelino / Almeida, Arminda / Santos, Joao	Incorporation of plastic waste into road pavements: A systematic literature review on the fatigue and rutting performances	133441
Haefliger, Severin / Thoma, Karel / Kaufmann, Walter	Influence of a triaxial stress state on the load-deformation behaviour of axisymmetrically corroded reinforcing bars	132737
Al-Mansouri, Omar / Pinoteau, Nicolas / Mege, Romain / Marchetti, Véronique	Influence of cure time, temperature, and moisture on mechanical properties of a fast cure adhesive for post-installed rebar application	133615
Miranda de Souza, Ariel / Franco de Carvalho, José Maria / Salgado, Igor Lopes / Rezende Santos, Carol Ferreira / Ferreira, Flávio Antônio / Pedroti, Leonardo Gonçalves / Castillo Lara, Rancés / Fiorotti Peixoto, Ricardo André	Influence of filler/cement and powder/total solids on the mixture design of self-compacting micro-concretes containing waste from the ornamental stone industry	133445
Delgado-Plana, P. / García-Díaz, A. / Bueno-Rodríguez, S. / Eliche Quesada, D.	Influence of NaOH molarity and Portland cement addition on performance of alkali activated cements based in silicomanganese slags	133544
Arabani, Mahyar / Shalchian, Mohammad Mahdi / Majd Rahimabadi, Maryam	The influence of rice fiber and nanoclay on mechanical properties and mechanisms of clayey soil stabilization	133542
Lin, Bozhong / Fang, Hu / Yao, Yao	Interfacial bonding mechanism between fire exposed and functionalized carbon nanotube mortar	133521
Lai, Yufeng / Liu, Xuanqi / Li, Yifan / Leonidas, Emilios / Fisk, Callum / Yang, Jiansheng / Zhang, Yang / Willmott, Jon	Investigating the fire-retardant efficiency of intumescent coatings on inclined timber: A study on application strategies and heat transfer mechanisms	133586
Wang, Xuerui / Liu, Dingyi / Sun, Baojiang / Liu, Shujie / Wang, Zhiyuan / Gao, Yonghai	Investigation of multi-field coupling mechanisms during well cement through gas hydrate layer in horizontal well	133505
Ziari, Hassan / Nasiri Amiri, Elaheh / Ayar, Pooyan	Investigation of the combination of microwave heating and calcium alginate capsule rejuvenation healing methods for cold mix asphalt considering the type of compaction effort	133437
Chen, Shaojie / Ren, Jianxi / Liu, Lang / Wang, Lei / Li, Yugen / Ren, Xiang	Investigation of the dynamic compressive mechanical properties of concrete under the combined effects of freeze–thaw and salt erosion	133548
Xu, Li / Ma, Xiaomeng / Pan, Jinlong / Zhou, Jiajia / Wang, Xiaoyi / Liu, Weiren	Investigation on bond behavior of steel-FRP composite bars in engineered cementitious composites by spliced beam tests	133480
Li, Hao / Yang, Haiqing / Li, Xingyue	Investigation on the working performance of a non-dispersible grouting material for the crack repairment of underwater structures	133558
Liu, Jian / Liu, Fangyu / Wang, Zhen / Fanijo, Ebenezer O. / Wang, Linbing	Involving prediction of dynamic modulus in asphalt mix design with machine learning and mechanical-empirical analysis	133610
Geckil, Tacettin / Ince, Ceren Beyza / Aksağan, Zülfükar	Laboratory evaluation of oak ash waste for use in hot mix asphalt modification	133617
Niknam, Mohammad Javad / Aghayan, Iman / Behzadian, Reza / Ghahremani, Mahdi	Laboratory evaluation of the effect of microfibers on the low-temperature cracking performance of grouted macadam mixtures	133426
Jiménez-García, E. de J. / Arellano-Vazquez, D. A. / Titotto, S. / Vilchis-Nestor, A. R. / Mayorga, M. / Romero-Salazar, L. / Arteaga-Arcos, J.C	A low environmental impact admixture for the elaboration of unfired clay building bricks	133470
Santorsola, Jordan / Butler, Liam J.	Material behaviour and flexural performance of low carbon concrete beams containing very high quantities of recycled and secondary materials	133350
Zheng, Chaorong / Sun, Kuo / Chen, Yixiao / Zhang, Wenyuan / Wu, Yue	Mechanical and thermal properties of environmentally friendly straw boards	133493
Jiang, Wei / Ling, Xianwu / Yuan, Dongdong / Xiao, Jingjing / Ren, Xueyuan / Li, Jingxiao / Fu, Zhiyu	Mechanical response of asphalt steel plastic pavement structure based on finite element simulation and scale load test	133490
Liu, Jianglin / Li, Yue / Jin, Caiyun / Li, Yaqiang / Lin, Hui / Shen, Jiale	Mechanism study on the effect of diammonium hydrogen phosphate on the setting time and micro-nanostructure of ordinary Portland cement paste	133616
Liu, Jianan / Wang, Zhenjun / Jing, Haosen / Jia, Hongyao / Zhou, Liang / Chen, Hao / Zhang, Lei	Microwave self-healing characteristics of bituminous mixtures with different steel slag aggregate and waste ferrite filler	133304
Kieufack, G. / Fagel, N. / Tchamba, A. B. / Bomeni, I. Y. / Ngapgue, F. / El Ouahabi, M. / Wouatong, A. S. L.	Mineralogical and physico-chemical characterization of alluvial clays from Bamendou-Balessing (West Cameroon): Suitability for ceramics	133396
Zhao, Pinhui / Zhou, Xu / Yang, Yansheng / Wang, Changwei / Wang, Chenlong / Liang, Hanyue / Li, Chen / Ren, Haiqing	Molecular dynamics simulation study of the effect of molecular structure of warm mix additive on lubricating properties	133529
Yang, Peixing / Dong, Fuqiang / Yu, Xin / Guo, Yongjia / Jin, Yong / Chen, Bei / Jiang, Yang / Liu, Kaixin	Molecular study on diffusion behavior and performance recovery of aged asphalt binder containing functional rejuvenators	133536
Bagheriehnajjar, Gazelle / Yousefpour, Hossein / Rahimnejad, Mostafa	Multi-objective optimization of mycelium-based bio-composites based on mechanical and environmental considerations	133346
Bezemer, H. J. / Awasthy, N. / Luković, M.	Multiscale analysis of long-term mechanical and durability behaviour of two alkali-activated slag-based types of concrete	133507
Bortoletto, M. / Sanches, A. O. / Santos, J. A. / da Silva, R. G. / Tashima, M. M. / Payá, J. / Soriano, L. / Borrachero, M. V. / Malmonge, J. A. / Akasaki, J. L.	New insights on understanding the Portland cement hydration using electrical impedance spectroscopy	133566
Gattesco, Natalino / Rizzi, Emanuele / Boem, Ingrid / Dudine, Allen / Gams, Matija	A new method of seismic strengthening stone masonry with CRM coatings on one side	133565
Hu, Mingjun / Sun, Daquan / Li, Bin / Xu, Lei / Sun, Yiren	A novel aging acceleration rate equation for accelerated weather aging test of high viscosity modified asphalt: Theoretical derivation and experimental correction	133525
Lin, Wuguang / Li, Xiaolong / Han, Hao / Yu, Qifeng / Cho, Yoon-Ho	A novel approach for pavement distress detection and quantification using RGB-D camera and deep learning algorithm	133593
Sun, Qiaorong / Zhang, Bo / Shi, Kejun / Gupta, Rishi / Zhu, Zhenyang / Qiang, Sheng	A novel method for solving hydration heat release based on equivalent heat release theory	133506
Ye, Shuhang / Lu, Cong / She, Peiyun / Li, Zhenghao / Xie, Tianyu / Leung, Christopher K. Y.	Numerical model of tensile behavior of textile reinforced concrete (TRC) based on stress field analysis	133568
Meng, Yuhong / Wang, Qiong / Su, Wei / Ye, Weimin / Chen, Yonggui	On the evolution of hydration cracks of compacted bentonite under different boundary conditions	133387
Chen, Xuyong / Lv, Long / Wu, Qiaoyun / Cheng, Shukai / Zhou, Qi / Zhao, Cheng / Fan, Tao / Zhao, Rixu	Optimization on the mix design method of self-compacting concrete with recycled coarse aggregate based on paste rheological threshold theory and material packing characteristics	133509
Olofinnade, Oluwarotimi M. / Osoata, Osamudiame P.	Performance assessment of mechanical properties of green normal strength concrete produced with metakaolin-cement coated recycled concrete aggregate for sustainable construction	133508
Faizi, Koohyar / Beetham, Paul / Kromanis, Rolands	Performance evaluation of rail trackbed stiffness: pre and post stabilisation	133452
Hu, Mingjun / Sun, Daquan / Sun, Guoqiang / Sun, Yiren / Ouyang, Jian	Performance study on anti-weather aging combinations for high-content polymer modified asphalt and comparison by improved multi-scale mathematical TOPSIS method	133357
Shahnewaz, Shoaib Md / Masri, Khairil Azman / Ahmad Abdul Ghani, Nadiatul Adilah / Jaya, Ramadhansyah Putra / Choo, Chin Siew / Giannakopoulou, Panagiota P. / Rogkala, Aikaterini / Lampropoulou, Paraskevi / Petrounias, Petros	Porous asphalt mixtures enriched with bamboo fibers as a new approach for future sustainable construction	133456
Sharma, Akshay / Roy, A. B. Danie / Bansal, Prem Pal	Post-heating evaluation of fibre reinforced concrete with LC3 binder as replacement to OPC	133603
Xiao, Manzhe / Luo, Rong / Chen, Yu / Ge, Xinmin	Prediction model of asphalt pavement functional and structural performance using PSO-BPNN algorithm	133534
Ding, Yongjie / Wei, Wei / Wang, Jiaojiao / Wang, Yanghui / Shi, Yuxin / Mei, Zijun	Prediction of compressive strength and feature importance analysis of solid waste alkali-activated cementitious materials based on machine learning	133545
Guo, Kaihua / Wang, Mengyao / Feng, Xiao / Yan, Haochen / Mao, Yunfei / Han, Zhaofeng / Ng, Wai Lam / Guan, Mingfu / Chen, Ji	Prediction of water film depth on grooved airport runway induced by intense rainfall and wind	133623
Cao, Pengxu / Xing, Lang / Luo, Jun / Jiang, Hao / Zhang, Xin / Li, Guanghui	Preparation of calcium silicate board from tobermorite-rich residue for energy conservation in buildings	133547
Zrar, Yarivan J. / Younis, Khaleel H. / Sherwani, Aryan Far H.	Properties of sustainable self-compacted concrete with recycled concrete and waste tire crumb rubber aggregates	133524
Li, Kenan / Yan, Xili / Pu, Jiheng / Wang, Yujie / Chen, Yu / Fang, Kai / Hu, Jiajun / Yang, Yi	Quantitative evaluation on the energy saving and emission reduction characteristics of warm mix asphalt mixtures	133465
Zhang, Biao / Liu, Pengwei / Qi, Nan / Luo, Hongjie / Wang, Fen / Ma, Tao / Zhao, Xichen / Fei, Guiqiang / Yin, Shu / Zhu, Jianfeng / Shi, Pei	Regulation of oxidation degree for graphene oxide on hydration process and engineering properties of natural hydraulic lime pastes for grout strengthening of stone cultural relics	133482
Wang, Her-Yung / Chang, Jung-Nan / Hung, Chang-Chi	Research on the engineering performance of concrete containing waste liquid crystal glass and volcanic ash in a hot spring environment	133488
Liu, Yanping / Xie, Jianguang / Wei, Dingbing / Tan, Yangwei	Research on the permanent deformation mechanism and dynamic meso-mechanical response of porous asphalt mixture composite structure using the discrete element method	133531
Liao, Qiao / Yu, Jiang-Tao / Su, Yuan-Rui / Yu, Ke-Quan	Shear failure mechanism and parametric study for seawater sea-sand engineered cementitious composites beams reinforced by FRP bars: Finite element analysis	133497
Wang, Chenxin / Zou, Xingxing / Sneed, Lesley H. / Zhang, Feng / Zheng, Kaiqi / Xu, Hao / Li, Guofen	Shear strength prediction of FRP-strengthened concrete beams using interpretable machine learning	133553
Cao, Qingyu / Yuan, Xiongzhou / Amin, Muhammad Nasir / Ahmad, Waqas / Althoey, Fadi / Alsharari, Fahad	A soft-computing-based modeling approach for predicting acid resistance of waste-derived cementitious composites	133540
Ishaq, Mubashera / Kamran, Kashif / Ahad Hussain, Abdul / Hina, Maryam	Sorption of modified clay minerals in pore solution of fired clay brick under pulsed current	133503
Azevedo, Ana / Almeida, João / Gonçalves, Márcio / Simões, Nuno / Castro, Nuno / Santos, Ana / Tadeu, António	Strategies to enhance the resistance of ETICS finishing coats to microbiological growth: A systematic study based on small- and large-scale laboratory tests	133499
Zhao, Shujie / Lu, Wei / Li, Dongwei / Xia, Ming	Study on acid resistance and high temperature resistance of composite geopolymer-stabilized lead–zinc tailing	133554
Guo, Lixia / Jia, Zhan / Zhong, Ling / Chen, Shoukai	Study on failure characteristics of baking-free bricks with wrap-shell aggregate	133541
Nisar, Jasim / Mir, Mohammad Shafi	Study on optimal preparation and rheological characteristics of waste low density polyethylene (LDPE)/styrene butadiene styrene (SBS) composite modified asphalt binder	133459
Mulugeta Alamnie, Mequanent / Taddesse, Ephrem / Hoff, Inge	A study on permanent deformation and fatigue damage interaction in asphalt concrete	133473
Hu, Haitao / Zhan, Qiwei / Zhang, Xuan / Zhou, Juanlan	Study on synthesizing MgAl-LDH in the concrete crack zone to enhance microbial mineralization capacity	133594
Guo, Xiao / Xie, Kaizhong / Liu, Zhenwei / Elchalakani, Mohamed / Zhou, Yiming	A study on the bond strength of interface between post-fire concrete and different epoxy resin adhesives	133429
Guan, Mingyang / Guo, Meng / Tan, Yiqiu / Du, Xiuli	Study on the effect of aging on cracking resistance of virgin asphalt binder and its evolution model	133443
Zeyad, Abdullah M.	Sustainable concrete Production: Incorporating recycled wastewater as a green building material	133522
Woo, Suji / Choi, Young Cheol	Synthesis of calcium silicate hydrate nanoparticles and their effect on cement hydration and compressive strength	133559
Ran, Hongyu / Elchalakani, Mohamed / Sadakkathulla, Mohamed Ali / Cai, Jingming / Xie, Tianyu	Thermoelectric ultra-lightweight high-performance ECC using cenospheres and calcined petroleum coke	133513
Al-Kroom, Hussein / Abd Elrahman, Mohamed / Tawfik, Taher A. / Meddah, Mohammed S. / Shalaby, Heba M. / Saleh, Alaa A. / Abdel-Gawwad, Hamdy A.	Transforming calcium carbonate–silicate wastes into steel protective coatings	133527
Yang, Kai / Cui, Hongjun / Ma, Xinwei / Zhu, Minqing	Understanding and characterizing the fatigue cracking resistance of asphalt binder at intermediate temperature: A literature review	133432
Şahan, Neslihan / Kumandaş, Aytuğ / Kabadayı, Ersoy / Çavdar, Erman / Oruç, Şeref	The use of wax-based additives in bitumen modification: A systematic quantitative literature review	133423
Akbas, Merve / Özaslan, Bilal / Iyisan, Recep	Utilization of recycled concrete aggregates for developing high-performance and durable flexible pavements	133479
Song, Qiao / Wang, Xianfeng / Fang, Yuan / Xing, Feng	XFEM and machine learning combined approach for failure prediction of microcapsules in cement-based self-healing materials	133515

About this
data sheet
IssueID
70973
Published on:
28/10/2023
Last updated on:
28/10/2023

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.