Bing Zhang 
- (2021): Behaviour of concrete-filled thin-walled corrugated steel tubes under cyclic axial compression. In: Thin-Walled Structures, v. 162 (May 2021).
- (2024): Effect of acylhydrazone self-healing agents with different structures on the properties of SBS modified asphalt waterproofing membrane. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Cooperative Optimization of Bus-Subway-Shared Bicycle Based on Uncertainty Theory. In: KSCE Journal of Civil Engineering, v. 28, n. 4 (January 2024).
- : Design and Performance Evaluation of the Curved Hengjiang Avenue Pedestrian Bridge: Y-shaped Piers and Mixed Decks. In: Structural Engineering International.
- (2024): Elliptical concrete-filled FRP tubes with an embedded H-shaped steel under axial compression and cyclic lateral loading: Experimental study and modelling. In: Composite Structures, v. 330 (February 2024).
- (2023): Cyclically loaded elliptical FRP-confined concrete: Behavioral characteristics and modeling. In: Engineering Structures, v. 285 (June 2023).
- (2023): Axial compressive behaviour of corroded steel reinforced concrete columns retrofitted with a basalt fibre reinforced polymer-ultrahigh performance concrete jacket. In: Composite Structures, v. 304 (January 2023).
- (2022): Effect of ion chelator on water sorption and transport behavior of unsaturated mortars with high volume fly ash and blast furnace slag. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Aeroelastic optimization design of composite materials blade based on RBF/ROM and CCA reliability analysis. In: Composite Structures, v. 300 (November 2022).
- (2019): Disc Cutter’s Rock Breaking Ability and Wear Resistance in Extremely Hard Rock: a Case Study in Qinling Tunnel of Han River to Wei River Water Diversion Project. In: Geotechnical and Geological Engineering, v. 37, n. 6 (10 August 2019).
- (2022): Axial compressive behavior and modeling of fiber-reinforced polymer-concrete-steel double-skin tubular stub columns with a rectangular outer tube and an elliptical inner tube. In: Engineering Structures, v. 260 (June 2022).
- (2022): Analysis of precursor information for coal and gas outbursts induced by roadway tunneling: A simulation test study for the whole process. In: Tunnelling and Underground Space Technology, v. 122 (April 2022).
- (2022): Damaged cable identification in cable-stayed bridge from bridge deck strain measurements using support vector machine. In: Advances in Structural Engineering, v. 25, n. 4 (January 2022).
- (2021): Behavior and design-oriented model for elliptical FRP-confined concrete under axial compression. In: Engineering Structures, v. 249 (December 2021).
- (2021): Effect of saw-tooth ply drops on the mechanical performance of tapered composite laminates. In: Composite Structures, v. 272 (September 2021).
- (2020): Aeroelastic tailoring method of tow-steered composite wing using matrix perturbation theory. In: Composite Structures, v. 234 (February 2020).
- (2018): Design of filament-wound composite structures with arch-shaped cross sections considering fiber tension simulation. In: Composite Structures, v. 194 (June 2018).
- (2018): Design and production of filament-wound composite square tubes. In: Composite Structures, v. 191 (May 2018).
- (2018): Design of filament-wound composite elbows based on non-geodesic trajectories. In: Composite Structures, v. 189 (April 2018).
- (2018): Delamination migration in multidirectional composite laminates under mode I quasi-static and fatigue loading. In: Composite Structures, v. 189 (April 2018).
- (2019): Design of filament-wound spherical pressure vessels based on non-geodesic trajectories. In: Composite Structures, v. 218 (June 2019).
- (2019): Dynamic mesh method based on diffusion equation and nodal rotation for high-aspect-ratio composite wings. In: Composite Structures, v. 215 (May 2019).
- (2019): Design and analysis of filament-wound composite pressure vessels based on non-geodesic winding. In: Composite Structures, v. 207 (January 2019).
- (2019): Effect of fiber angles on hybrid fiber-reinforced polymer–concrete–steel double-skin tubular columns under monotonic axial compression. In: Advances in Structural Engineering, v. 23, n. 7 (December 2019).
- (2019): Effect of Fiber Angles on Hybrid Double-Tube Concrete Columns under Monotonic Axial Compression. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): Analytical solution of VOCs emission from wet materials with variable thickness. In: Building and Environment, v. 104 (August 2016).
- (2019): Effect of fiber angles on normal- and high-strength concrete-filled fiber-reinforced polymer tubes under monotonic axial compression. In: Advances in Structural Engineering, v. 23, n. 5 (November 2019).
- (2019): Accountability Effects of Public Participation Practice in Chinese Public Projects: Partial Least-Squares Path Analysis. In: Journal of Management in Engineering (ASCE), v. 35, n. 6 (November 2019).
- (2017): Causes of Business-to-Government Corruption in the Tendering Process in China. In: Journal of Management in Engineering (ASCE), v. 33, n. 2 (March 2017).
- (2017): Behavior of GFRP retrofitted reinforced concrete slabs subjected to conventional explosive blast. In: Materials and Structures, v. 50, n. 6 (December 2017).
Structurae cooperates with
