0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Gamage, Kumari / Fawzia, Sabrina / Zahra, Tatheer / Teixeira, Muge Belek Fialho / Ramli Sulong, Nor Hafizah (2024): Advancement in Sustainable 3D Concrete Printing: A Review on Materials, Challenges, and Current Progress in Australia. In: Buildings, v. 14, n. 2 (1 February 2024).

    https://doi.org/10.3390/buildings14020494

  2. Meghdad Ghaseminia, Seyed / Zahra, Tatheer / Thambiratnam, David P. / Thamboo, Julian (2024): Cyclic in-plane shear behaviour of reinforced concrete masonry walls with single and double layered reinforcement. In: Construction and Building Materials, v. 421 (March 2024).

    https://doi.org/10.1016/j.conbuildmat.2024.135689

  3. Zahra, Tatheer / Asad, Mohammad / Thamboo, Julian (2024): Flexural behaviour of cementitious composites embedded with 3D printed re-entrant chiral auxetic meshes. In: Smart Materials and Structures, v. 33, n. 2 (4 January 2024).

    https://doi.org/10.1088/1361-665x/ad1b24

  4. Asad, Mohammad / Win, Nay / Zahra, Tatheer / Thambiratnam, David P. / Chan, Tommy H. T. / Zhuge, Yan (2023): Enhanced energy absorption of auxetic cementitious composites with polyurethane foam layers for building protection application. In: Journal of Building Engineering, v. 78 (November 2023).

    https://doi.org/10.1016/j.jobe.2023.107613

  5. Asad, Mohammad / Thamboo, Julian / Zahra, Tatheer / Thambiratnam, David P. (2024): Out of-plane failure analysis of masonry walls subjected to hydrostatic and hydrodynamic loads induced by flash floods. In: Engineering Structures, v. 298 (January 2024).

    https://doi.org/10.1016/j.engstruct.2023.117041

  6. Zahra, Tatheer / Dorji, Jigme / Thamboo, Julian / Cameron, Nathanael / Asad, Mohammad / Kasinski, Wojtek / Nardone, Arlene (2023): Behaviour of reinforced mortarless concrete masonry panels under axial compression: An experimental and analytical study. In: Construction and Building Materials, v. 377 (May 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.131097

  7. Zahra, Tatheer / Dorji, Jigme / Thamboo, Julian / Asad, Mohammad / Kasinski, Wojtek / Nardone, Arlene (2023): In-plane and out-of-plane shear characteristics of reinforced mortarless concrete block masonry. In: Journal of Building Engineering, v. 66 (May 2023).

    https://doi.org/10.1016/j.jobe.2023.105938

  8. Dorji, Sonam / Derakhshan, Hossein / Thambiratnam, David P. / Zahra, Tatheer / Mohyeddin, Alireza (2023): Behaviour and material properties of versaloc semi-interlocking mortarless masonry. In: Materials and Structures, v. 56, n. 1 (30 January 2023).

    https://doi.org/10.1617/s11527-023-02102-2

  9. Zahra, Tatheer / Thamboo, Julian / Asad, Mohammad / Song, Mengli (2021): Experimental investigation on the effectiveness of lateral restrainers to the vertical steel in reinforced masonry walls under axial compression. In: Construction and Building Materials, v. 297 (August 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123790

  10. Thamboo, Julian / Zahra, Tatheer / Asad, Mohammad / Silva, Lakshitha / Gimhani, Jeewamali (2022): Analytical model for CFRP confined masonry columns subjected to monotonic and cyclic compression. In: Composite Structures, v. 292 (July 2022).

    https://doi.org/10.1016/j.compstruct.2022.115696

  11. Asad, Mohammad / Zahra, Tatheer / Thambiratnam, David P. / Chan, Tommy HT / Liu, Xuemei / Zhuge, Yan / Hayne, Mark / Morris, Anthony / Nguyen, Christina (2022): Innovative impact testing machine for enhancing impact related research in Australia. In: International Journal of Protective Structures, v. 13, n. 2 (April 2022).

    https://doi.org/10.1177/20414196211073502

  12. Asad, Mohammad / Zahra, Tatheer / Thamboo, Julian / Song, Mengli (2022): Finite element modelling of reinforced masonry walls under axial compression. In: Engineering Structures, v. 252 (February 2022).

    https://doi.org/10.1016/j.engstruct.2021.113594

  13. Zahra, Tatheer / Asad, Mohammad / Thamboo, Julian / Noor-E-Khuda, Sarkar / Derakhshan, Hossein (2022): Influence of restrainer bar chairs on the compression and flexural behaviour of reinforced masonry walls. In: Structures, v. 35 (January 2022).

    https://doi.org/10.1016/j.istruc.2021.11.023

  14. Thamboo, Julian / Zahra, Tatheer / Asad, Mohammad / Song, Mengli (2021): Improved design provisions for reinforced concrete block masonry walls under axial compression. In: Construction and Building Materials, v. 310 (December 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125226

  15. Asad, Mohammad / Zahra, Tatheer / Thambiratnam, David P. / Chan, Tommy H. T. / Zhuge, Yan (2021): Geometrically modified auxetic polyurethane foams and their potential application in impact mitigation of masonry structures. In: Construction and Building Materials, v. 311 (December 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125170

  16. Zahra, Tatheer (2021): Behaviour of 3D Printed Re-entrant Chiral Auxetic (RCA) Geometries under In-Plane and Out-of-Plane Loadings. In: Smart Materials and Structures, v. 30, n. 11 (24 September 2021).

    https://doi.org/10.1088/1361-665x/ac2811

  17. Zahra, Tatheer / Thamboo, Julian / Asad, Mohammad / Song, Mengli (2021): Analytical stress–strain model of reinforced concrete masonry wallettes under axial compression. In: Structures, v. 34 (December 2021).

    https://doi.org/10.1016/j.istruc.2021.09.052

  18. Zahra, Tatheer / Rafferty, Christopher (2022): Influence of blockaid chairs on compression and amp out-of-plane behaviour of reinforced masonry walls. In: Australian Journal of Civil Engineering, v. 20, n. 2 (January 2022).

    https://doi.org/10.1080/14488353.2021.1961969

  19. Asad, Mohammad / Zahra, Tatheer / Thambiratnam, David P. / Chan, Tommy H. T. / Zhuge, Yan (2021): Assessing vibration induced damage in unreinforced masonry walls subject to vehicular impact – A numerical study. In: Engineering Structures, v. 245 (October 2021).

    https://doi.org/10.1016/j.engstruct.2021.112843

  20. Thamboo, Julian / Zahra, Tatheer / Asad, Mohammad (2021): Monotonic and cyclic compression characteristics of CFRP confined masonry columns. In: Composite Structures, v. 272 (September 2021).

    https://doi.org/10.1016/j.compstruct.2021.114257

  21. Asad, Mohammad / Zahra, Tatheer / Thambiratnam, David (2021): Failure of masonry walls under high velocity impact – A numerical study. In: Engineering Structures, v. 238 (July 2021).

    https://doi.org/10.1016/j.engstruct.2021.112009

  22. Zahra, Tatheer / Asad, Mohammad / Thamboo, Julian (2021): Effect of geometry on the compression characteristics of bonded brickwork. In: Structures, v. 32 (August 2021).

    https://doi.org/10.1016/j.istruc.2021.03.040

  23. Zahra, Tatheer / Zehra, Yasmeen / Ahmad, Shuaib (2014): Condition assessment and strengthening of residential units. In: Case Studies in Construction Materials, v. 1 ( 2014).

    https://doi.org/10.1016/j.cscm.2014.08.001

  24. Zahra, Tatheer / Thamboo, Julian / Asad, Mohammad (2021): Compressive strength and deformation characteristics of concrete block masonry made with different mortars, blocks and mortar beddings types. In: Journal of Building Engineering, v. 38 (June 2021).

    https://doi.org/10.1016/j.jobe.2021.102213

  25. Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David (2020): Impact mitigation of masonry walls with carbon fibre and Auxetic fibre composite renders – A numerical study. In: Structures, v. 28 (December 2020).

    https://doi.org/10.1016/j.istruc.2020.09.047

  26. Zahra, Tatheer / Jelvehpour, Ali / Thamboo, Julian A. / Dhanasekar, Manicka (2020): Interfacial transition zone modelling for characterisation of masonry under biaxial stresses. In: Construction and Building Materials, v. 249 (July 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.118735

  27. Zahra, Tatheer / Dhanasekar, Manicka (2018): Characterisation and strategies for mitigation of the contact surface unevenness in dry-stack masonry. In: Construction and Building Materials, v. 169 (April 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.03.002

  28. Thamboo, Julian Ajith / Zahra, Tatheer / Dhanasekar, Remadevi (2020): Development of design methodology for mortarless masonry system: Case study – a resettlement housing colony. In: Journal of Building Engineering, v. 27 (January 2020).

    https://doi.org/10.1016/j.jobe.2019.100973

  29. Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David (2019): Characterisation of polymer cement mortar composites containing carbon fibre or auxetic fabric overlays and inserts under flexure. In: Construction and Building Materials, v. 224 (November 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.07.120

  30. Zahra, Tatheer / Dhanasekar, Manicka (2017): Characterisation of cementitious polymer mortar – Auxetic foam composites. In: Construction and Building Materials, v. 147 (August 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.04.151

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine