Shuo Yang 
- (2023): Ground Vibration Response to Vibratory Sheet Pile Driving and Extraction. In: Buildings, v. 13, n. 11 (26 October 2023).
- (2023): Investigation on geometric and surface finish quality of 3D concrete printed walls with hollow section. In: Advances in Structural Engineering, v. 27, n. 3 (December 2023).
- (2023): Research and Optimization of Lateral Compressive Performance of the 3-D Printed Beetle Elytron Plate. In: KSCE Journal of Civil Engineering, v. 27, n. 8 (June 2023).
- (2023): Effects of amorphous nano-silica on hydration products of tricalcium silicate at 80 °C. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Research on failure strength master curve and fatigue performance of asphalt mixture containing high-proportion reclaimed asphalt pavement. In: Construction and Building Materials, v. 370 (March 2023).
- (2022): A new approach based on the augmented particle sink effect to remove indoor airborne particulate matter: Experimental study. In: Energy and Buildings, v. 275 (November 2022).
- (2022): Validation of the fault rupture-response spectrum analysis method for ordinary and seismically isolated bridges crossing strike-slip fault rupture zones. In: Engineering Structures, v. 273 (December 2022).
- (2022): Mobile 3D Printing Techniques for Construction Engineering: Outdoor Navigation and Printing Quality Control. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Seismic Strengthening of Unreinforced Concrete Block Masonry Walls with High Ductile Fiber-Reinforced Concrete (HDC). In: Journal of Earthquake Engineering, v. 27, n. 10 (September 2022).
- (2022): Effect of interface geometric parameters on the mechanical properties and damage evolution of layered cemented gangue backfill: Experiments and models. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): In-plane cyclic tests on strengthening of full-scale autoclaved aerated concrete blocks infilled RC frames using highly ductile concrete (HDC). In: Journal of Building Engineering, v. 49 (May 2022).
- (2021): Stress path investigation of fatigue characteristics of cement stabilized macadam. In: Construction and Building Materials, v. 292 (July 2021).
- (2022): Uniaxial tensile performance of high ductile fiber-reinforced concrete with built-in basalt textile grids. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): Improvements on performance of bio-asphalt modified by castor oil-based polyurethane: An efficient approach for bio-oil utilization. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Seismic response study of ordinary and isolated bridges crossing strike‐slip fault rupture zones. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 11 (September 2021).
- (2016): Comparative Study of Damage and Hysteretic Energy Characteristics of an RC Continuous Girder Bridge under Strong Near-Fault and Far-Field Earthquakes. In: Journal of Highway and Transportation Research and Development (English Edition), v. 10, n. 2 (June 2016).
- (2001): Nondestructive detection of weak joints in adhesively bonded composite structures. In: Composite Structures, v. 51, n. 1 (January 2001).
- (2020): Analysis of bridge structures crossing strike‐slip fault rupture zones: A simple method for generating across‐fault seismic ground motions. In: Earthquake Engineering and Structural Dynamics, v. 49, n. 13 (25 October 2020).
- (2020): In-plane seismic behavior of autoclaved aerated concrete block masonry walls retrofitted with high ductile fiber-reinforced concrete. In: Engineering Structures, v. 219 (September 2020).
- (2020): Investigation of Longitudinal Cracking in Widened Concrete Pavements. In: The Baltic Journal of Road and Bridge Engineering, v. 15, n. 1 (March 2020).
- (2020): Experimental Investigation of the Deformation and Failure Behavior of a Tunnel Excavated in Mixed Strata Using Transparent Soft Rock. In: KSCE Journal of Civil Engineering, v. 24, n. 3 (February 2020).
- (2020): Experimental and numerical evaluation of confined masonry walls retrofitted with engineered cementitious composites. In: Engineering Structures, v. 207 (March 2020).
- (2018): Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites. In: Construction and Building Materials, v. 177 (July 2018).
- (2007): Engineering measures to control windblown sand in Shiquanhe Town, Tibet. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 95, n. 1 (January 2007).
- (2017): Effect of ground motion filtering on the dynamic response of a seismically isolated bridge with and without fault crossing considerations. In: Soil Dynamics and Earthquake Engineering, v. 92 (January 2017).
- (2018): Bridges crossing fault rupture zones: A review. In: Soil Dynamics and Earthquake Engineering, v. 113 (October 2018).
- (2019): Large-Scale Direct Shear Test on Scrap Tire Strip Reinforced Brick Powder. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): The research on prediction models for urban family member trip generation. In: KSCE Journal of Civil Engineering, v. 20, n. 7 (January 2016).
- (2019): Evolution of the broken rock zone in the mixed ground tunnel based on the DSCM. In: Tunnelling and Underground Space Technology, v. 84 (February 2019).
Structurae cooperates with
