Jinxia Xu 
- (2024): Improved conductive and self-sensing properties of cement concrete by PDMS/NCB-impregnated recycled fine aggregate. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Development of low-cost engineered cementitious composites using Yellow River silt and unoiled PVA fiber. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): Laboratory investigation of the chloride ingress into cement mortar incorporating a novel core–shell nanomaterial. In: Construction and Building Materials, v. 379 (May 2023).
- (2024): Application of electro-injection method in improving cement mortar durability. In: Magazine of Concrete Research, v. 76, n. 2 (January 2024).
- (2023): Improved chloride transport resistance of cement mortar using quartz sands modified with MgAl-LDH. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Alkali-activated fly ash foam concrete with Yellow River silt: Physico-mechanical and structural properties. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): PDMS/CNB-impregnation treatment for improving the electrical and piezoresistive properties of recycled fine aggregate mortar. In: Journal of Building Engineering, v. 69 (June 2023).
- (2022): Application of magnesium alloy sacrificial anode for restraining chloride ingress into mortar. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Improving electrical and piezoresistive properties of cement-based composites by combined addition of nano carbon black and nickel nanofiber. In: Journal of Building Engineering, v. 51 (July 2022).
- (2020): Increasing self-sensing capability of carbon nanotubes cement-based materials by simultaneous addition of Ni nanofibers with low content. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): A comparative investigation on cathodic protections of three sacrificial anodes on chloride-contaminated reinforced concrete. In: Construction and Building Materials, v. 246 (June 2020).
- (2018): Microstructure and pressure-sensitive properties of cement-based composite with Ni nanowires. In: Construction and Building Materials, v. 159 (January 2018).
- (2018): Influence of polycarboxylate superplasticizer on chloride binding in cement paste. In: Construction and Building Materials, v. 158 (January 2018).
- (2009): Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement. In: Construction and Building Materials, v. 23, n. 5 (May 2009).
- (2011): Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete. In: Construction and Building Materials, v. 25, n. 2 (February 2011).
- (2012): Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick. In: Construction and Building Materials, v. 27 (February 2012).
- (2012): Evolution of pH and chemical composition of pore solution in carbonated concrete. In: Construction and Building Materials, v. 28 (March 2012).
- (2012): Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions. In: Construction and Building Materials, v. 30 (May 2012).
- (2012): Effect of chloride salt type on chloride binding behavior of concrete. In: Construction and Building Materials, v. 37 (December 2012).
- (2014): Influence of carbonation on chloride-induced reinforcement corrosion in simulated concrete pore solutions. In: Construction and Building Materials, v. 56 (April 2014).
- (2014): Influence of compression fatigue on chloride threshold value for the corrosion of steels in simulated concrete pore. In: Construction and Building Materials, v. 73 (December 2014).
- (2016): Influence of elevated temperature on release of bound chlorides from chloride-admixed plain and blended cement pastes. In: Construction and Building Materials, v. 104 (February 2016).
- (2016): Influence of surfactants on chloride binding in cement paste. In: Construction and Building Materials, v. 125 (October 2016).
- (2016): Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of silicate ion. In: Construction and Building Materials, v. 127 (November 2016).
- (2017): A novel electrochemical technique for enhancing silane penetration depth into mortar. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Effect of Na2SiO3 content on passivation and corrosion behaviour of steel in a simulated pore solution of Na2SiO3-activated slag. In: Construction and Building Materials, v. 146 (August 2017).
- (2015): Application of Electrodeposition Method in Upgrading Mortar Durability. In: Journal of Advanced Concrete Technology, v. 13, n. 7 ( 2015).
- (2013): Influence of chloride salt type on critical chloride content of reinforcement corrosion in concrete. In: Magazine of Concrete Research, v. 65, n. 5 (March 2013).
- (2011): Chloride threshold value for reinforcement corrosion in concrete with additions of silica fume or fly ash. In: Magazine of Concrete Research, v. 63, n. 12 (December 2011).
- (2018): Electrochemical and Semiconducting Properties of Passive Films on Steel Surfaces in Alkali-Activated Slag Extraction Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 7 (July 2018).
Structurae cooperates with
