Nathan van den Bossche 
- (2024): Comparison of different frost models with hygrothermal simulations to better understand frost damage in porous building materials. In: Building and Environment, v. 255 (May 2024).
- (2024): Importance of technical installations in whole-building LCA: Single-family case study in Flanders. In: Building and Environment, v. 250 (February 2024).
- (2023): The influence of material characteristics and environmental circumstances on the efficiency of water repellent treatments of historic facades. In: Construction and Building Materials, v. 386 (July 2023).
- (2023): Degradation of brick masonry walls in Europe and the Mediterranean: Advantages of a response-based analysis to study climate change. In: Building and Environment, v. 230 (February 2023).
- (2023): Pre-Compressed Foam Sealing Tapes to Seal Joints between Building Envelope Components Watertight: An Experimental Assessment. In: Buildings, v. 13, n. 3 (26 February 2023).
- (2022): Experimental and numerical assessment of permeability functions in closed cavity façades. In: Glass Structures & Engineering, v. 7, n. 3 (22 September 2022).
- (2022): A simple numerical tool for superimposition of climatic load and wind load in Closed Cavity Facades: importance of a coupled PE-thermal-mechanical model. In: Glass Structures & Engineering, v. 7, n. 3 (22 September 2022).
- (2022): Experimental validation of a numerical model for closed cavity façade glass structural calculation under dynamic cavity temperature, dry air flow and wind loads effects. In: Glass Structures & Engineering, v. 7, n. 3 (22 September 2022).
- (2022): Drainage of infiltrated rainwater in wall assemblies: Test method, experimental quantification, and recommendations. In: Journal of Building Physics, v. 46, n. 2 (September 2022).
- (2022): Review of rainwater infiltration rates in wall assemblies. In: Building and Environment, v. 219 (July 2022).
- (2022): Decision framework to select moisture reference years for hygrothermal simulations. In: Building and Environment, v. 218 (June 2022).
- (2023): The impact of demographical, geographical and climatological factors on building defects in Belgium. In: International Journal of Building Pathology and Adaptation, v. 41, n. 3 (February 2023).
- (2022): On the potential of clustering approaches for hygrothermal material properties based on three degradation risks in solid masonry constructions. In: Journal of Building Physics, v. 46, n. 1 (April 2022).
- (2021): Effect of a one-dimensional approach in LCA on the environmental life cycle impact of buildings: Multi-family case study in Flanders. In: Building and Environment, v. 206 (December 2021).
- (2021): Evaluation of ALARO-0 and REMO Regional Climate Models over Iran Focusing on Building Material Degradation Criteria. In: Buildings, v. 11, n. 8 (27 July 2021).
- (2021): Factorial Study on the Impact of Climate Change on Freeze-Thaw Damage, Mould Growth and Wood Decay in Solid Masonry Walls in Brussels. In: Buildings, v. 11, n. 3 (27 February 2021).
- (2021): Comparative study on the feasibility of watertight face-sealed building joints under simulated wind-driven rain conditions. In: Building Research & Information, v. 49, n. 7 (June 2021).
- (2020): Implementation of rainwater infiltration measurements in hygrothermal modelling of non-insulated brick cavity walls. In: Journal of Building Physics, v. 43, n. 6 (May 2020).
- (2019): Pressure-equalised façade systems: Evaluation of current watertightness test standards used to assess the performance of enclosure components. In: Journal of Building Physics, v. 43, n. 5 (October 2019).
- (2019): Liquid moisture transport in combined ceramic brick and natural hydraulic lime mortar samples: Does the hygric interface resistance dominate the moisture transport?. In: Journal of Building Physics, v. 43, n. 3 (September 2019).
- (2018): Experimental assessment of rainwater management of a ventilated façade. In: Journal of Building Physics, v. 42, n. 1 (July 2018).
- (2012): Airtightness of the window–wall interface in cavity brick walls. In: Energy and Buildings, v. 45 (February 2012).
- (2017): Assessing the thermal performance of insulating glass units with infrared thermography: Potential and limitations. In: Energy and Buildings, v. 138 (March 2017).
- (2020): Environmental and financial assessment of façade renovations designed for change: developing optimal scenarios for apartment buildings in Flanders. In: Building and Environment, v. 183 (October 2020).
- (2020): Airtightness of sealed building joints: Comparison of performance before and after artificial ageing. In: Building and Environment, v. 180 (August 2020).
- (2020): Development of numerical model for determination of pressure equalization in facades during wet conditions. In: Building and Environment, v. 178 (July 2020).
- (2016): Airtightness and watertightness of window frames: Comparison of performance and requirements. In: Building and Environment, v. 110 (December 2016).
- (2017): Inspecciones en la gestión del agua de fachadas ventiladas basadas en la evaluación in situ y pruebas de laboratorio = Insights in the water management characteristics of rear-ventilated façades based on on-site assessment and laboratory testing. In: Anales de Edificación, v. 3, n. 1 (April 2017).
- (2019): Does historic construction suffer or benefit from the urban heat island effect in Ghent and global warming across Europe?. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 46, n. 11 (November 2019).
- (2016): Results of Belgian quality control framework for cavity wall insulation. In: Bauphysik, v. 38, n. 6 (December 2016).
Structurae cooperates with
