M. Saiid Saiidi
- (2010): Experimental Study of Precast Bridge Columns with Built-In Elastomer. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2202, n. 1 (January 2010).
- (2024): Headed coupling behavior of large diameter Cu-Al-Mn shape memory alloy bars: Mechanical testing and microstructural analyses. In: Construction and Building Materials, v. 424 (April 2024).
- (2012): An analytical study of residual displacements in RC bridge columns subjected to near-fault earthquakes. In: Bridge Structures, v. 8, n. 1 ( 2012).
- (2024): Experimental-analytical investigation of accelerated bridge construction concrete columns with self-centering Fe-SMA bars subjected to near-fault ground motions. In: Engineering Structures, v. 299 (January 2024).
- (2022): Low-cycle fatigue behavior of Cu–Al–Mn superelastic alloys at different temperatures. In: Smart Materials and Structures, v. 31, n. 11 (September 2022).
- (2022): Experimental study on hybrid concrete-filled fiber reinforced polymer tube (HCFFTs) columns under simulated seismic loading. In: Engineering Structures, v. 264 (August 2022).
- (2021): Analytical Studies of a Novel Bridge Column-Footing Pipe Pin Connection under Lateral Loading. In: Journal of Bridge Engineering (ASCE), v. 26, n. 2 (February 2021).
- (2021): Analytical studies and design of steel plate girder ABC bridges under seismic loads. In: Engineering Structures, v. 227 (January 2021).
- (2019): Flexural behavior of hybrid concrete-filled fiber reinforced polymer tube columns. In: Composite Structures, v. 230 (December 2019).
- (2015): Emergency repair of an RC bridge column with fractured bars using externally bonded prefabricated thin CFRP laminates and CFRP strips. In: Composite Structures, v. 133 (December 2015).
- (2015): Behavior and Simplified Modeling of Mechanical Reinforcing Bar Splices. In: ACI Structural Journal, v. 112, n. 2 (March 2015).
- (2019): Computational studies on the seismic response of the State Route 99 bridge in Seattle with SMA/ECC plastic hinges. In: Frontiers of Structural and Civil Engineering, v. 13, n. 1 (February 2019).
- (2011): Investigation of effect of near-fault motions on substandard bridge structures. In: Earthquake Engineering and Engineering Vibration, v. 10, n. 1 (March 2011).
- (2002): Influence of earthquake ground motion incoherency on multi-support structures. In: Earthquake Engineering and Engineering Vibration, v. 1, n. 2 (December 2002).
- (2019): Design, Construction, and Shake Table Testing of a Steel Girder Bridge System with ABC Connections. In: Journal of Bridge Engineering (ASCE), v. 24, n. 9 (September 2019).
- (2019): Experimental and analytical studies of base pipe pin connections under direct tension. In: Engineering Structures, v. 195 (September 2019).
- (2004): Effectiveness of Composites in Earthquake Damage Repair of Reinforced Concrete Flared Columns. In: Journal of Composites for Construction, v. 8, n. 4 (August 2004).
- (2019): Experimental Study on Seismically Resilient Two-Span Bridge Models Designed for Disassembly. In: Journal of Earthquake Engineering, v. 23, n. 1 ( 2019).
- (2017): Design and construction of UHPC-filled duct connections for precast bridge columns in high seismic zones. In: Structure and Infrastructure Engineering, v. 13, n. 6 (July 2017).
- (2017): Deflection of in-span hinges in prestressed concrete box girder bridges during construction. In: Engineering Structures, v. 131 (January 2017).
- (2015): Advanced materials for control of post-earthquake damage in bridges. In: Smart Materials and Structures, v. 24, n. 2 (February 2015).
- (2014): Multihazard Extreme Event Design for Accelerated Bridge Construction. In: Practice Periodical on Structural Design and Construction, v. 19, n. 2 (May 2014).
- (2016): Cyclic Response of Precast Bridge Piers with Novel Column-Base Pipe Pins and Pocket Cap Beam Connections. In: Journal of Bridge Engineering (ASCE), v. 21, n. 4 (April 2016).
- (2016): Low-Damage Precast Columns for Accelerated Bridge Construction in High Seismic Zones. In: Journal of Bridge Engineering (ASCE), v. 21, n. 3 (March 2016).
- (2013): Design Guidelines for Rapid Repair of Earthquake-Damaged Circular RC Bridge Columns Using CFRP. In: Journal of Bridge Engineering (ASCE), v. 18, n. 9 (September 2013).
- (2006): Development, Shake Table Testing, and Design of FRP Seismic Restrainers. In: Journal of Bridge Engineering (ASCE), v. 11, n. 4 (July 2006).
- (2009): Nonlinear Earthquake Response Modeling of a Large-Scale Two-Span Concrete Bridge. In: Journal of Bridge Engineering (ASCE), v. 14, n. 6 (November 2009).
- (2004): Assessment of Steel and Fiber Reinforced Plastic Jackets for Seismic Retrofit of Reinforced Concrete Columns with Structural Flares. In: Journal of Structural Engineering (ASCE), v. 130, n. 4 (April 2004).
- (2007): Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns. In: Journal of Structural Engineering (ASCE), v. 133, n. 7 (July 2007).
- (2011): Bearing and Shear Failure of Pipe-Pin Hinges Subjected to Earthquakes. In: Journal of Bridge Engineering (ASCE), v. 16, n. 3 (May 2011).
Structurae cooperates with
