-
Miki, Chitoshi / Mori, Takeshi / Chang, Dong Ii / Okumura, Toshie (1984): Fatigue Crack Growth Rates In Weld Metals. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1984, n. 344 ( 1984).
https://doi.org/10.2208/jscej.1984.377
-
Okumura, Toshie / Yonenaga, Yasushi (1971): Some problems of mass production of steel bridges in Japan. Presented at: IABSE Symposium: Etude à la résistance post-critique des poutres à âme pleine et des poutres-caissons = Bemessung von Blech- und Kastenträgern im überkritischen Tragbereich = Design of Plate and Box Girders for Ultimate Strength, Praha, CSSR, 1971.
https://doi.org/10.5169/seals-10372
-
Ishizawa, Naruo / Okumura, Toshie (1970): Calculation of stress in knee joints of rigid steel frames of thin walled section and its application. In: IABSE Publications, v. 30, n. 2 ( 1970).
https://doi.org/10.5169/seals-23595
-
Okumura, Toshie / Suzuki, Yasyhiro (1968): Influence of cross-sectional distortion on flexural-torsional buckling. Presented at: Huitième Congrès de l'AIPC = Eighth Congress of IABSE = Achter Kongress der IVBH, New York, NY, USA, 9-14 September 1968.
https://doi.org/10.5169/seals-8764
-
Nishino, Fumio / Okumura, Toshie (1968): Experimental Investigation of strength of plate girders in shear. Presented at: Huitième Congrès de l'AIPC = Eighth Congress of IABSE = Achter Kongress der IVBH, New York, NY, USA, 9-14 September 1968.
https://doi.org/10.5169/seals-8783
-
Sakai, Fujikazu / Okumura, Toshie (1972): Influence of diaphragms on behaviour of box girders with deformable cross section. Presented at: Ninth Congress of IABSE = Neuvième Congrès de l'AIPC = Neunter Kongress der IVBH, Amsterdam, Netherlands, 8-13 May 1972.
https://doi.org/10.5169/seals-9568
-
Ohkubo, Sadaji / Okumura, Toshie (1976): Structural system optimization based on suboptimizing method of member elements. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10421
-
Okumura, Toshie / Akiyama, Narioki / Murakami, Eiichi (1976): Estimation of strength of tubular joints. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10445
-
Okumura, Toshie / Minami, Shunji / Konishi, Ichiro (1976): Application of high strength steels to a long span truss bridge - Osaka Port Bridge. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10469
-
Okumura, Toshie / Ohkubo, Sadaji (1976): Basic optimum design diagrams of highway plate girders. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10513
-
Okumura, Toshie (1976): Fabrication and erection problems. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10548
-
Minami, Shunji / Konishi, Ichiro / Okumura, Toshie (1976): Welding of high-strength steels. Presented at: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.
https://doi.org/10.5169/seals-10560
-
Susei, Shuzo / Okumura, Toshie / Konishi, Ichiro (1980): Trends in big bridge engineering (part 2: fabrication). Presented at: 11th IABSE Congress, Vienna, Austria, 31 August - 5 September 1980.
https://doi.org/10.5169/seals-11209
-
Okumura, Toshie / Susei, Shuzo / Konishi, Ichiro (1980): Maintenance-free bridges. Presented at: 11th IABSE Congress, Vienna, Austria, 31 August - 5 September 1980.
https://doi.org/10.5169/seals-11349
-
Yamamoto, Kazuyuki / Akiyama, Narioki / Okumura, Toshie (1985): Elastic Analysis of Gusseted Truss Joints. In: Journal of Structural Engineering (ASCE), v. 111, n. 12 (December 1985).
https://doi.org/10.1061/(asce)0733-9445(1985)111:12(2545)
-
Yamamoto, Kazuyuki / Akiyama, Narioki / Okumura, Toshie (1988): Buckling Strengths of Gusseted Truss Joints. In: Journal of Structural Engineering (ASCE), v. 114, n. 3 (March 1988).
https://doi.org/10.1061/(asce)0733-9445(1988)114:3(575)