Jiaping Liu 
- (2023): The effect of temperature rise inhibitor on the hydration and strength development of slag/fly ash blended cement paste. In: Construction and Building Materials, v. 395 (September 2023).
- (2024): Effect of drying method on calcium silicate hydrate (C-S-H): Experiments and molecular dynamics simulations study. In: Construction and Building Materials, v. 411 (January 2024).
- (2022): Dynamic daylight performance oriented design optimizations for contemporary reading room represented deep open-plan spaces. In: Journal of Building Engineering, v. 62 (December 2022).
- (2022): The Effect of Relative Humidity Dependent Thermal Conductivity on Building Insulation Layer Thickness Optimization. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Effect of clay content on shrinkage of cementitious materials. In: Construction and Building Materials, v. 322 (March 2022).
- (2022): Effect of fine aggregate gradation on the rheology of mortar. In: Construction and Building Materials, v. 332 (May 2022).
- (2021): Effect of starch-based admixtures on the exothermic process of cement hydration. In: Construction and Building Materials, v. 289 (June 2021).
- (2022): Effect of clay content on plastic shrinkage cracking of cementitious materials. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Effect of A Novel Shrinkage-reducing Polycarboxylate Superplasticizer on Plastic Shrinkage Cracking of Mortars. In: Magazine of Concrete Research, v. 74, n. 11 (June 2022).
- (2021): Effect of salt on hygroscopic properties of cement mortar. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Effect of aggregate size on the yield stress of mortar. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Effect of moisture transfer on heat transfer through exterior corners of cooled buildings in hot and humid areas. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): The effect of moisture transfer on the inner surface thermal performance and the thermal transmittance of the roof-wall corner building node in high-temperature and high-humidity areas. In: Journal of Building Engineering, v. 44 (December 2021).
- (2020): Effects of CaO-based and MgO-based expansion agent, curing temperature and restraint degree on pore structure of early-age mortar. In: Construction and Building Materials, v. 257 (October 2020).
- (2021): Effect of microfines from manufactured sand on yield stress of cement paste. In: Construction and Building Materials, v. 267 (January 2021).
- (2013): Effect of moisture transfer on internal surface temperature. In: Energy and Buildings, v. 60 (May 2013).
- (2014): Effect of the night ventilation rate on the indoor environment and air-conditioning load while considering wall inner surface moisture transfer. In: Energy and Buildings, v. 80 (September 2014).
- (2018): The effect of heat and moisture coupling migration of ground structure without damp-proof course on the indoor floor surface temperature and humidity: Experimental study. In: Energy and Buildings, v. 158 (January 2018).
- (2020): Dynamic process of behavioral adaptation of migrants with different thermal experiences: A long-term follow-up field survey. In: Energy and Buildings, v. 207 (January 2020).
- (2020): Drying shrinkage of mortar manufactured with recycled fine aggregate at vary initial saturation degree. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Effect of CaO and MgO based expansive agent on deformation and mechanical properties of concrete-filled steel tubes. In: Construction and Building Materials, v. 250 (July 2020).
- (2018): Effects and mechanisms of surface-treatment of cementitious materials with nanoSiO2@PCE core-shell nanoparticles. In: Construction and Building Materials, v. 166 (March 2018).
- (2020): Effect of foaming gas and cement type on the thermal conductivity of foamed concrete. In: Construction and Building Materials, v. 231 (January 2020).
- (2019): Effect of graphene oxide (GO) on hydration of tricalcium silicate (C3S). In: Construction and Building Materials, v. 203 (April 2019).
- (2016): Effect of Superplasticizers on Apparent Viscosity of Cement-Based Material with a Low Water–Binder Ratio. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (September 2016).
- (2013): Effect and mechanism of controlled permeable formwork on concrete water adsorption. In: Construction and Building Materials, v. 39 (February 2013).
- (2014): Effectiveness of rejuvenator seal materials on performance of asphalt pavement. In: Construction and Building Materials, v. 55 (March 2014).
- (2017): Early-age hydration and mechanical properties of high volume slag and fly ash concrete at different curing temperatures. In: Construction and Building Materials, v. 149 (September 2017).
- (2019): Effect of temperature rising inhibitor on expansion behavior of cement paste containing expansive agent. In: Construction and Building Materials, v. 199 (February 2019).
- (2018): Effect of Steel Fiber on Flexural Toughness and Fracture Mechanics Behavior of Ultrahigh-Performance Concrete with Coarse Aggregate. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 12 (December 2018).
Structurae cooperates with
