Liang Li 
- (2023): Assessment of cracking risk of concrete due to restrained strain based on zero-stress temperature and cracking temperature. In: Construction and Building Materials, v. 383 (June 2023).
- (2024): Comparative study on the dynamic tensile properties of polypropylene and polyethylene fiber reinforced engineered cementitious composites under low to high strain rates. In: Journal of Building Engineering, v. 82 (April 2024).
- (2024): Comparative analysis of dynamic mechanical properties of steel fiber reinforced concrete under ambient temperature and after exposure to high temperatures. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Demonstration of a remote-controlled hybrid wind–solar water pumping system. In: LHB: Hydroscience Journal, v. 109, n. 1 (8 March 2023).
- (2023): Elastoplastic dynamic constitutive model of concrete with combined effects of temperature and strain rate. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Data-driven computing for nonlinear problems of composite structures based on sub-domain search technique. In: Computers & Structures, v. 279 (April 2023).
- (2022): Dynamic modeling of a fish tail actuated by IPMC actuator based on the absolute nodal coordinate formulation. In: Smart Materials and Structures, v. 31, n. 11 (September 2022).
- (2022): Comparative study on the dynamic mechanical properties of steel fiber reinforced concrete at high temperatures and after high temperature cooling. In: Construction and Building Materials, v. 346 (September 2022).
- (2019): Analysis and Design Optimization of Collapse Characteristics of Taojiakuang Tunnel Entrance Section. In: Geotechnical and Geological Engineering, v. 38, n. 1 (11 September 2019).
- (2022): Catalytic Ozonation of Ciprofloxacin with Cu–Al Layered Double Hydroxides Based on Response Surface Analysis. In: Journal of Environmental Engineering (ASCE), v. 148, n. 4 (April 2022).
- (2022): Basic tensile creep of concrete with and without superabsorbent polymers at early ages. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Airflow deflectors of external windowsto induce ventilation: Towards COVID-19 prevention and control. In: Sustainable Cities and Society, v. 77 (February 2022).
- (2021): Analysis of Shaft Resistance Setup of Driven Piles in Soft Sensitive Clays Considering Soil Consolidation and Creep. In: International Journal of Geomechanics, v. 21, n. 11 (November 2021).
- (2015): Enhanced Electrolytic Removal of Ammonia from the Aqueous Phase with a Zeolite-Packed Electrolysis Reactor under a Continuous Mode. In: Journal of Environmental Engineering (ASCE), v. 141, n. 2 (February 2015).
- (2019): Design, Simulation, and Verification of a Heating and Stirring Device for Cold Patching Materials in the Plateau Cold Region of China. In: Journal of Highway and Transportation Research and Development (English Edition), v. 13, n. 3 (September 2019).
- (2021): Dynamic response of asphalt pavement under vibration rolling load: Theory and calibration. In: Soil Dynamics and Earthquake Engineering, v. 143 (April 2021).
- (2020): Bidder Network Community Division and Collusion Suspicion Analysis in Chinese Construction Projects. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): Analysis of vibration reduction characteristics of composite fiber curved laminated panels. In: Composite Structures, v. 227 (November 2019).
- (2019): Dynamic modeling and vibration analysis of rotating beams with active constrained layer damping treatment in temperature field. In: Composite Structures, v. 226 (October 2019).
- (2015): Dynamic analysis of rotating axially FG tapered beams based on a new rigid–flexible coupled dynamic model using the B-spline method. In: Composite Structures, v. 124 (June 2015).
- (2019): Comparison of slope failure areas between limit equilibrium method and smoothed particle hydrodynamics. In: European Journal of Environmental and Civil Engineering, v. 26, n. 2 (October 2019).
- (2019): Dimensionless Parameter Diagrams for the Active and Passive Stability of a Shallow 3D Tunnel Face. In: KSCE Journal of Civil Engineering, v. 23, n. 2 (January 2019).
- (2014): Blast Load Effects On the Pier of High-speed Railway Bridge. Presented at: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2015): Determination of Effective Thermal Conductivity of Asphalt Concrete with Random Aggregate Microstructure. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 12 (December 2015).
- (2016): Advanced Concrete Model in Hydrocode to Simulate Concrete Structures under Blast Loading. In: Advances in Civil Engineering, v. 2016 ( 2016).
- (2016): Dynamic responses of a semi-type offshore floating wind turbine during normal state and emergency shutdown. In: China Ocean Engineering, v. 30, n. 1 (January 2016).
- (2015): Comparative study on response surfaces for reliability analysis of spatially variable soil slope. In: China Ocean Engineering, v. 29, n. 1 (January 2015).
- (2008): Cyclic performance of frames with prestressed steel–concrete composite beams. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 35, n. 10 (October 2008).
- (2012): Capillary effect on flow in the drainage layer of highway pavement. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 39, n. 6 (June 2012).
- (2019): Analytical solution for the limiting drainage of a mountain tunnel based on area-well theory. In: Tunnelling and Underground Space Technology, v. 84 (February 2019).
Structurae cooperates with
