Seung-Jun Kwon 
- (2016): GGBFS 콘크리트에 매립된 Notch를 가진 FRP Hybrid Bar의 부식저항성 평가 (Evaluation of Anti-Corrosion Performance of FRP Hybrid Bar with Notch in GGBFS Concrete). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 20, n. 4 (July 2016).
- (2014): CSA 팽창재를 혼입한 강섬유 보강 모르타르의 균열 저항성능 평가 (Evaluation of Crack Resistant Performance in Cement Mortar with Steel Fiber and CSA Expansion Admixture). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 18, n. 3 (May 2014).
- (2014): CSA 팽창재를 혼입한 강섬유 보강 콘크리트의 역학적 성능 및 균열 저항성능 평가 (Evaluation of Mechanical Properties and Crack Resistant Performance in Concrete with Steel Fiber Reinforcement and CSA Expansive Admixture). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 18, n. 1 (January 2014).
- (2014): CSA 팽창재를 혼입한 철근보강 모르타르의 인장 경화-연화 특성에 관한 실험적 연구 (Experimental Study on Tension-Hardening and Softening Characteristics in Reinforced Mortar with CSA Expansion Agent). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 18, n. 1 (January 2014).
- (2010): Analysis of carbonation behavior in concrete using neural network algorithm and carbonation modeling. In: Cement and Concrete Research, v. 40, n. 1 (January 2010).
- (2009): Evaluation of chloride penetration in high performance concrete using neural network algorithm and micro pore structure. In: Cement and Concrete Research, v. 39, n. 9 (September 2009).
- (2021): Axial and flexural performances of columns restored after severe damage. In: Journal of Building Engineering, v. 44 (December 2021).
- (2020): Detection of Corrosion of Post-tensioned Tendons Using Replaceable Reference Electrodes Plugged into Surface-mounted Sockets. Presented at: IABSE Conference: Risk Intelligence of Infrastructures, Seoul, South Korea, 9-10 November 2020.
- (2021): CO2 uptake model of limestone-powder-blended concrete due to carbonation. In: Journal of Building Engineering, v. 38 (June 2021).
- (2020): Axial performance of RC columns strengthened with different jacketing methods. In: Engineering Structures, v. 206 (March 2020).
- (2018): Durability performance of CNT and nanosilica admixed cement mortar. In: Construction and Building Materials, v. 159 (January 2018).
- (2018): Extraction of chloride from chloride contaminated concrete through electrochemical method using different anodes. In: Construction and Building Materials, v. 158 (January 2018).
- (2012): Concrete mix design for service life of RC structures exposed to chloride attack. In: Computers and Concrete, v. 10, n. 6 (December 2012).
- (2012): Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation. In: Construction and Building Materials, v. 29 (April 2012).
- (2012): Analysis technique for autogenous shrinkage in high performance concrete with mineral and chemical admixtures. In: Construction and Building Materials, v. 34 (September 2012).
- (2013): Analysis technique for flexural behavior in RC beam considering autogenous shrinkage effect. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Effect of cover depth, w/c ratio, and crack width on half cell potential in cracked concrete exposed to salt sprayed condition. In: Construction and Building Materials, v. 54 (March 2014).
- (2016): Effects of cold joint and loading conditions on chloride diffusion in concrete containing GGBFS. In: Construction and Building Materials, v. 115 (July 2016).
- (2016): Analysis of the effects of rice husk ash on the hydration of cementitious materials. In: Construction and Building Materials, v. 105 (February 2016).
- (2017): Effects of red mud and Alkali-Activated Slag Cement on efflorescence in cement mortar. In: Construction and Building Materials, v. 133 (February 2017).
- (2017): A highly sensitive ultrathin-film iron corrosion sensor encapsulated by an anion exchange membrane embedded in mortar. In: Construction and Building Materials, v. 156 (December 2017).
- (2017): Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer. In: Construction and Building Materials, v. 145 (August 2017).
- (2017): Long-term corrosion performance of blended cement concrete in the marine environment – A real-time study. In: Construction and Building Materials, v. 154 (November 2017).
- (2019): Durability and purification performance of concrete impregnated with silicate and sprayed with photocatalytic TiO2. In: Construction and Building Materials, v. 199 (February 2019).
- (2015): Development and application of microcapsule for cement hydration control. In: KSCE Journal of Civil Engineering, v. 20, n. 1 (February 2015).
- (2009): An Experimental Study on Evaluation of Compressive Strength in Cement Mortar Using Averaged Electromagnetic Properties. In: International Journal of Concrete Structures and Materials, v. 3, n. 1 (June 2009).
- (2011): Analysis technique for restrained shrinkage of concrete containing chlorides. In: Materials and Structures, v. 44, n. 2 (March 2011).
- (2011): Equivalent Modal Damping of Short-Span Bridges Subjected to Strong Motion. In: Journal of Bridge Engineering (ASCE), v. 16, n. 2 (March 2011).
- (2018): Flexural tests on externally post-tensioned lightweight concrete beams. In: Engineering Structures, v. 164 (June 2018).
- (2018): Low-Cycle Flexural Fatigue Behavior of Concrete Beam Reinforced with Hybrid FRP-Steel Rebar. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
