Jiwang Jiang 
- (2024): Analysis of asphalt microscopic and force curves under water-temperature coupling with AFM. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Comprehensive evaluation and data analysis of field pavement distress for epoxy asphalt pavement on steel bridge deck. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Cracking resistance performance of epoxy asphalt mixture collected from in-service steel bridge deck pavement: Multiscale testing and evaluation. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Application of a stochastic damage model to predict the variability of creep behavior for asphalt mixtures. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Factors controlling pre- and post-peak behavior of asphalt mixtures containing RAP in the SCB test. In: Materials and Structures, v. 55, n. 6 (26 June 2022).
- (2022): Asphalt pavement density measurement using non-destructive testing methods: current practices, challenges, and future vision. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Characterization of mortar film distribution of asphalt mixtures containing reclaimed asphalt pavement and its relationship with fracture performance using image analysis method. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): 3D-Reconstruction and characterization of the pore microstructure within the asphalt FAM using the X-ray micro-computed tomography. In: Construction and Building Materials, v. 272 (February 2021).
- (2021): Characterization of the interconnected pore and its relationship to the directional permeability of porous asphalt mixture. In: Construction and Building Materials, v. 269 (February 2021).
- (2021): Effects of design parameters and moisture conditions on interface bond strength between thin friction course (TFC) and underlying asphalt pavements. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Correlation investigation of fatigue indices of fine aggregate matrix (FAM) and asphalt mixture containing reclaimed asphalt pavement materials. In: Construction and Building Materials, v. 262 (November 2020).
- (2021): Feasibility and performance of the Semi-circular Bending test in evaluating the low-temperature performance of asphalt mortar. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Factors Affecting Maintenance Probability and Resurfacing Thickness Based on the Pavement Management System. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Accuracy Improvement for Two-Dimensional Finite-Element Modeling while Considering Asphalt Mixture Meso-Structure Characteristics in Indirect Tensile Test Simulation. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (October 2020).
- (2020): Effect of binder film distribution on the fatigue characteristics of asphalt Binder/Filler composite based on image analysis method. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Effect of cohesive and adhesive parameters on the moisture resistance of thin friction course (TFC) with varying mix design parameters. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Deep reinforcement learning for long‐term pavement maintenance planning. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 11 (16 October 2020).
- (2020): Factors affecting the rutting resistance of asphalt pavement based on the field cores using multi-sequenced repeated loading test. In: Construction and Building Materials, v. 253 (August 2020).
- (2018): Characterization of permanent deformation performance of asphalt mixture by multi-sequenced repeated load test. In: Construction and Building Materials, v. 180 (August 2018).
- (2018): Characterization and identification of asphalt mixtures based on Convolutional Neural Network methods using X-ray scanning images. In: Construction and Building Materials, v. 174 (June 2018).
- (2018): Experimental analysis of skeleton strength of porous asphalt mixtures. In: Construction and Building Materials, v. 171 (May 2018).
- (2018): Evaluation of permanent deformation of multilayer porous asphalt courses using an advanced multiply-repeated load test. In: Construction and Building Materials, v. 160 (January 2018).
- (2019): Evaluation of aggregate packing based on thickness distribution of asphalt binder, mastic and mortar within asphalt mixtures using multiscale methods. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): Fatigue cracking performance evaluation of laboratory-produced polymer modified asphalt mixture containing reclaimed asphalt pavement material. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Characterization of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images. In: Construction and Building Materials, v. 213 (July 2019).
- (2016): Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis. In: Construction and Building Materials, v. 136 (April 2017).
- (2019): Evaluation of the healing potential of asphalt mixtures based on a modified semi-circular bending test. In: Construction and Building Materials, v. 196 (January 2019).
- (2018): Evaluation of Susceptibility of High-Temperature Performance of Asphalt Mixture to Morphological Feature of Aggregates by Fractal Theory. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
- (2018): Development of Permanent Deformation Master Curves of Asphalt Mixtures by Load-Temperature Superposition. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
Structurae cooperates with
