Chuanlin Hu 
- (2024): Role of C-F-S-H/PCE nanocomposites on the hydration of Portland cement with varying gypsum levels. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Insight into the interaction mechanism of polycarboxylate superplasticizer and polyacrylamide in cementitious materials. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Energy-saving calcination of hydromagnesite for sustainable magnesia-based cement: A new route towards MgO production. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Probing the time-dependent behavior of calcium-silicate-hydrate gel by nanoindentation continuous stiffness measurement. In: Developments in the Built Environment, v. 18 (April 2024).
- (2023): Corrosion resistance and mechanical properties of in-situ grown Mg/Al layered double hydroxide coatings on reinforcing steel. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Sustainable cementitious material with ultra-high content partially calcined limestone-calcined clay. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): Improving the interfacial properties of PVA fiber and cementitious composite: Design and characterization. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Microstructure, Hydration, and Chloride Binding Behavior of Limestone Calcined Clay Cement Prepared Using Seawater. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Effect of Synthesis Conditions on Particle Size Morphology, Structure, and Acceleration Performance of C-A-S-H Nanoparticles. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): A novel alkali-activated cement from mineral admixture, superabsorbent polymers, and alkali-doped carboxylate glass. In: Construction and Building Materials, v. 383 (June 2023).
- (2023): Towards greener ultra-high performance concrete based on highly-efficient utilization of calcined clay and limestone powder. In: Journal of Building Engineering, v. 66 (May 2023).
- (2022): Improve the long-term property of heat-cured mortars blended with fly ash by internal curing. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Enhanced mechanical properties of polymer-modified cementitious materials via organosilane fly ash hybrid–polyvinyl pyrrolidone crosslink network. In: Construction and Building Materials, v. 330 (May 2022).
- (2022): Revealing the micro-mechanical characteristics of high early strength cement pastes. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Characterization and reactivity of Nepali clays as supplementary cementitious material. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Microstructure and mechanical properties of sustainable cementitious materials with ultra-high substitution level of calcined clay and limestone powder. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Performance evaluation of regenerated clinker from completely recyclable mortar. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Evaluation on recycled clinker production and properties from regeneration of completely recycle concrete. In: Construction and Building Materials, v. 301 (September 2021).
- (2020): CO2 capture and conversion by an organosilane-modified cementitious material. In: Construction and Building Materials, v. 253 (August 2020).
- (2018): Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Nano-mechanical properties of alkali-silica reaction (ASR) products in concrete measured by nano-indentation. In: Construction and Building Materials, v. 158 (January 2018).
- (2014): Micromechanical investigation of Portland cement paste. In: Construction and Building Materials, v. 71 (November 2014).
- (2014): Microstructure and mechanical properties of fly ash blended cement pastes. In: Construction and Building Materials, v. 73 (December 2014).
- (2015): A review on the mechanical properties of cement-based materials measured by nanoindentation. In: Construction and Building Materials, v. 90 (August 2015).
- (2016): Influence of curing regimes on mechanical properties of magnesium oxychloride cement-based composites. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Micromechanical investigation of magnesium oxychloride cement paste. In: Construction and Building Materials, v. 105 (February 2016).
- (2016): Statistical nanoindentation technique in application to hardened cement pastes: Influences of material microstructure and analysis method. In: Construction and Building Materials, v. 113 (June 2016).
- (2017): Pozzolanic reaction of lightweight fine aggregate and its influence on the hydration of cement. In: Construction and Building Materials, v. 153 (October 2017).
- (2016): Influence of cenospheres on properties of magnesium oxychloride cement-based composites. In: Materials and Structures, v. 49, n. 4 (April 2016).
- (2018): Characterisation of the interfacial transition zone in mortars by nanoindentation and scanning electron microscope. In: Magazine of Concrete Research, v. 70, n. 18 (September 2018).
Structurae cooperates with
