Samer Dessouky 
- : A comparison of novel hybrid ensemble learners to predict the compressive strength of green engineering materials: a case of concrete composed of rice husk ash. In: European Journal of Environmental and Civil Engineering.
- (2024): Intelligent Prediction of Asphalt Concrete Air Voids during Service Life Using Cubist and GBRT-Ensemble Learning Approaches Hybridized with an Equilibrium Optimizer Algorithm. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 5 (May 2024).
- (2023): A novel hybrid adaptive boosting approach for evaluating properties of sustainable materials: A case of concrete containing waste foundry sand. In: Journal of Building Engineering, v. 72 (August 2023).
- (2024): Shear modulus prediction of landfill components using novel machine learners hybridized with forensic-based investigation optimization. In: Construction and Building Materials, v. 411 (January 2024).
- (2022): Structural health assessment of pavement sections in the southern central United States using FWD parameters. In: Frontiers in Built Environment, v. 8 (February 2022).
- (2022): Using ANN modeling for pavement layer moduli backcalculation as a function of traffic speed deflections. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): Correlating the Asphalt-Binder BBR Test Data to the HMA (ML-OT) Fracture Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2007): Development of an Elastoviscoplastic Microstructural-Based Continuum Model to Predict Permanent Deformation in Hot Mix Asphalt. In: International Journal of Geomechanics, v. 7, n. 2 (March 2007).
- (2020): Performance Characterization of Warm-Mix Asphalt Containing High Reclaimed-Asphalt Pavement with Bio-Oil Rejuvenator. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (December 2020).
- (2018): Sensitivity analysis and validation of the Simple Punching Shear Test (SPST) for screening HMA mixes. In: Construction and Building Materials, v. 169 (April 2018).
- (2019): Performance evaluation of asphalt mixtures containing high-RAP binder content and bio-oil rejuvenator. In: Construction and Building Materials, v. 227 (December 2019).
- (2006): Finite-Element Analysis of Hot Mix Asphalt Microstructure Using Effective Local Material Properties and Strain Gradient Elasticity. In: Journal of Engineering Mechanics (ASCE), v. 132, n. 2 (February 2006).
- (2019): Using the Simple Punching Shear Test (SPST) for evaluating the HMA shear properties and predicting field rutting performance. In: Construction and Building Materials, v. 224 (November 2019).
- (2020): Estimated Remaining Fatigue Life of Flexible Pavements Based on the Normalized Comprehensive Area Ratio Deflection Parameter. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 47, n. 5 (May 2020).
- (2019): The use of high content of fine crumb rubber in asphalt mixes using dry process. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): Using polymer-based mixes as alternative to asphalt mixes in low volume roads. In: Construction and Building Materials, v. 204 (April 2019).
- (2012): New Approach to Recycling Asphalt Shingles in Hot-Mix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 11 (November 2012).
- (2010): Linear Viscoelastic Modeling for Hot-Poured Crack Sealants at Low Temperature. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 10 (October 2010).
- (2013): Laboratory Evaluation of the Workability and Compactability of Asphaltic Materials prior to Road Construction. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 6 (June 2013).
- (2011): Effect of pre-heating duration and temperature conditioning on the rheological properties of bitumen. In: Construction and Building Materials, v. 25, n. 6 (June 2011).
- (2013): Influence of hindered phenol additives on the rheology of aged polymer-modified bitumen. In: Construction and Building Materials, v. 38 (January 2013).
- (2013): Effect of recycled asphalt shingles on physical and chemical properties of virgin asphalt binders. In: Construction and Building Materials, v. 45 (August 2013).
- (2018): Characterizing Temperature Performance of Bio-Modified Binders Containing RAP Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 8 (August 2018).
- (2018): Theoretical and Experimental Evaluation of Two Roadway Piezoelectric-Based Energy Harvesting Prototypes. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (February 2018).
- (2004): Prediction of Hot Mix Asphalt Stability Using the Superpave Gyratory Compactor. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 6 (December 2004).
Structurae cooperates with
