Zheng Chen 
- (2022): Effect of microstructure on fatigue crack growth behavior of surface‐ and middle‐layer materials of thick high‐strength bridge steel plates. In: Fatigue & Fracture of Engineering Materials & Structures, v. 46, n. 2 (2 November 2022).
- (2024): Corrosion resistance of cement-based materials with sugarcane bagasse ash-metakaolin-Portland cement binder under carbonic acid water environment. In: Journal of Building Engineering, v. 87 (June 2024).
- (2024): Effect of LDHs-ALA on steel corrosion in chloride-rich simulated concrete pore solution: experimental and DFT studies. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Axial compressive behavior of high-strength concrete-filled steel tube with multiple confinement effects. In: Journal of Constructional Steel Research, v. 213 (February 2024).
- (2024): 3D vision technologies for a self-developed structural external crack damage recognition robot. In: Automation in Construction, v. 159 (March 2024).
- (2023): Fiber reinforced sulphoaluminate cementitious composites: Mechanical properties and comprehensive evaluation method. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Beyond time: Enhancing corrosion resistance of geopolymer concrete and BFRP bars in seawater. In: Composite Structures, v. 322 (October 2023).
- (2023): Fatigue evaluation and structural optimization of rib-to-diaphragm connection in orthotropic steel decks. In: Journal of Constructional Steel Research, v. 208 (September 2023).
- (2023): Automatic classification of asphalt pavement cracks using a novel integrated generative adversarial networks and improved VGG model. In: Engineering Structures, v. 277 (February 2023).
- (2023): Experimental study on flexural behavior of BTRM reinforced with hybrid combinations of short fibers and pre-stressing. In: Structures, v. 49 (March 2023).
- (2023): Anti-corrosion mechanism of MgAl-LDHs inhibitors with varying anionic charge on reinforcing steel in simulated concrete pore solutions. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Characterizing the effects of Al(OH)3 and Mg(OH)2 on reaction products and drying shrinkage characteristics of alkali-activated slag. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Effect of Freeze–Thaw cycles on the pavement performance of SBS modified and composite crumb rubber modified asphalt mixtures. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Connected Preceding Vehicle Identification for Enabling Cooperative Automated Driving in Mixed Traffic. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 5 (May 2022).
- (2021): Experimental and Numerical Study on Ultimate Shear Load Carrying Capacity of Corroded RC Beams. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Change in fresh properties of high-strength concrete due to pumping. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Consolidation Theory of Unsaturated Soils with Vertical Drains Considering Well Resistance and Smear Effect under Time-Dependent Loading. In: Journal of Engineering Mechanics (ASCE), v. 147, n. 9 (September 2021).
- (2021): Combined Impact of Alcohol-Fuel Properties on Performance and Emissions Characteristics with Low-Temperature Combustion in a Diesel Engine. In: Journal of Energy Engineering, v. 147, n. 4 (August 2021).
- (2018): Combustion and Emission Characteristics of Diesel Engines Using Diesel, DMF/Diesel, and N-Pentanol/Diesel Fuel Blends. In: Journal of Energy Engineering, v. 144, n. 3 (June 2018).
- (2019): Combined Impact of n-Butanol Additive and Spark Timing on Combustion and Efficiency of a GDI Engine. In: Journal of Energy Engineering, v. 145, n. 5 (October 2019).
- (2020): Clustering-based probability distribution model for monthly residential building electricity consumption analysis. In: Building Simulation, v. 14, n. 1 (November 2020).
- (2021): Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete. In: Construction and Building Materials, v. 267 (January 2021).
- (2020): Calculation and Analysis of Box Girder Temperature Effect of Large Cantilever Bridge under the Solar Radiation. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2020): Feasibility study of a touch-enabled active sensing approach to inspecting subsea bolted connections using piezoceramic transducers. In: Smart Materials and Structures, v. 29, n. 8 (25 June 2020).
- (2020): Coupled models to describe the combined diffusion-reaction behaviour of chloride and sulphate ions in cement-based systems. In: Construction and Building Materials, v. 243 (May 2020).
- (2019): Crack growth prediction of cement-based systems subjected to two-dimensional sulphate attack. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): Diffusion and distribution of chloride ions in carbonated concrete with fly ash. In: Construction and Building Materials, v. 218 (September 2019).
- (2017): Application of tack coat in pavement engineering. In: Construction and Building Materials, v. 152 (October 2017).
- (2007): A dynamic model for ionic polymer–metal composite sensors. In: Smart Materials and Structures, v. 16, n. 4 (August 2007).
- (2018): An Equal-Strain Analytical Solution for the Radial Consolidation of Unsaturated Soils by Vertical Drains considering Drain Resistance. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
