0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Giorgio Monti ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Rahmat Rabi, Raihan / Vailati, Marco / Monti, Giorgio (2024): Effectiveness of Vibration-Based Techniques for Damage Localization and Lifetime Prediction in Structural Health Monitoring of Bridges: A Comprehensive Review. In: Buildings, v. 14, n. 4 (27 März 2024).

    https://doi.org/10.3390/buildings14041183

  2. Rahmat Rabi, Raihan / Monti, Giorgio (2024): Fragility curves of hollow-core bridge piers for territorial risk studies using closed-form equations. In: Structures, v. 61 (März 2024).

    https://doi.org/10.1016/j.istruc.2024.105966

  3. Monti, Giorgio / Rahmat Rabi, Raihan / Vailati, Marco (2024): Direct displacement-based design of dissipative bracings for seismic retrofit of reinforced concrete buildings. In: Journal of Building Engineering, v. 82 (April 2024).

    https://doi.org/10.1016/j.jobe.2023.108208

  4. Khan, Nisar Ali / Aloisio, Angelo / Monti, Giorgio / Nuti, Camillo / Briseghella, Bruno (2023): Experimental characterization and empirical strength prediction of Pakistani brick masonry walls. In: Journal of Building Engineering, v. 71 (Juli 2023).

    https://doi.org/10.1016/j.jobe.2023.106451

  5. Di Trapani, Fabio / Khan, Nisar Ali / Zhou, Lin / Demartino, Cristoforo / Monti, Giorgio (2023): Cyclic response of infilled RC frames with window and door openings: Experimental results and damage interpretation. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 1 (28 Oktober 2023).

    https://doi.org/10.1002/eqe.4005

  6. Lin, Zhou / Monti, Giorgio / Wu, Zhao-Qi (2023): Composite action in Shallow Steel-beam-Concrete Composite decks. In: Engineering Structures, v. 286 (Juli 2023).

    https://doi.org/10.1016/j.engstruct.2023.116114

  7. Monti, Giorgio / Nisticó, Nicola / Santini, Silvia (2001): Circular RC Sections Confined with FRP: Modeling and Design. Vorgetragen bei: 2001 Structures Congress and Exposition, Washington, D.C., May 21-23, 2001.

    https://doi.org/10.1061/40558(2001)159

  8. Lin, Zhou / Zhang, Hongmei / Monti, Giorgio / Castoro, Chiara (2022): Effects of Openings and Axial Load Ratio on the Lateral Capacity of Steel-Fiber-Reinforced Concrete Shear Walls. In: Buildings, v. 12, n. 11 (27 Oktober 2022).

    https://doi.org/10.3390/buildings12112032

  9. Triantafillou, Thanasis / Matthys, Stijn / Audenaert, Katrien / Balázs, György / Blaschko, Michael / Blontrock, Hendrik / Czaderski, Christoph / David, Emmanuelle / Di Tomasso, Angello / Duckett, William / Hordijk, Dick / Leeming, Michael / Meier, Heinz / Monti, Giorgio / Moss, Richard / Neubauer, Uwe / Niedermeier, Roland / Täljsten, Bjørn / Zehetmaier, Gerhart / Zilch, Konrad (2001): Externally bonded FRP reinforcement for RC structures. fédération internationale du béton (fib), Lausanne (Schweiz).

    https://doi.org/10.35789/fib.BULL.0014

  10. Aprile, Alessandra / Monti, Giorgio (2021): Advanced Methods for Structural Rehabilitation. In: Buildings, v. 12, n. 1 (21 Dezember 2021).

    https://doi.org/10.3390/buildings12010079

  11. Rahmat Rabi, Raihan / Bianco, Vincenzo / Monti, Giorgio (2021): Energy-based method to design hysteretic bracings for the seismic rehabilitation of low-to-medium rise RC frames. In: Bulletin of Earthquake Engineering, v. 20, n. 1 (November 2021).

    https://doi.org/10.1007/s10518-021-01249-z

  12. Khan, Nisar Ali / Monti, Giorgio / Nuti, Camillo / Vailati, Marco (2021): Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan. In: Buildings, v. 11, n. 7 (30 Juni 2021).

    https://doi.org/10.3390/buildings11070276

  13. Bianco, Vincenzo / Monti, Giorgio / Belfiore, Nicola Pio (2021): Advanced Multi-Body Modelling of DCCSS Isolators: Geometrical Compatibility and Kinematics. In: Buildings, v. 11, n. 2 (20 Januar 2021).

    https://doi.org/10.3390/buildings11020050

  14. Li, Zhi / Zhang, Jinyuan / Wang, Rui / Monti, Giorgio / Xiao, Yan (2020): Design Embedment Strength of Plybamboo Panels Used for GluBam. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (Mai 2020).

    https://doi.org/10.1061/(asce)mt.1943-5533.0003128

  15. Di Gangi, Giorgia / Demartino, Cristoforo / Quaranta, Giuseppe / Monti, Giorgio (2020): Dissipation in sheathing-to-framing connections of light-frame timber shear walls under seismic loads. In: Engineering Structures, v. 208 (April 2020).

    https://doi.org/10.1016/j.engstruct.2020.110246

  16. Quaranta, Giuseppe / Mollaioli, Fabrizio / Monti, Giorgio (2016): Effectiveness of design procedures for linear TMD installed on inelastic structures under pulse-like ground motion. In: Earthquakes and Structures, v. 10, n. 1 (Januar 2016).

    https://doi.org/10.12989/eas.2016.10.1.239

  17. Spoelstra, Marijn R. / Monti, Giorgio (1999): FRP-Confined Concrete Model. In: Journal of Composites for Construction, v. 3, n. 3 (August 1999).

    https://doi.org/10.1061/(asce)1090-0268(1999)3:3(143)

  18. Huo, Jingsi / Liu, Jingya / Dai, Xiaoqing / Yang, Jin / Lu, Yuan / Xiao, Yan / Monti, Giorgio (2016): Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface. In: Journal of Composites for Construction, v. 20, n. 5 (Oktober 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000677

  19. Monti, Giorgio / Nisticó, Nicola / Santini, Silvia (2001): Design of FRP Jackets for Upgrade of Circular Bridge Piers. In: Journal of Composites for Construction, v. 5, n. 2 (Mai 2001).

    https://doi.org/10.1061/(asce)1090-0268(2001)5:2(94)

  20. Trentadue, Francesco / Mastromarino, Erika / Quaranta, Giuseppe / Petrone, Floriana / Monti, Giorgio / Marano, Giuseppe Carlo (2014): Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams. In: Open Journal of Civil Engineering, v. 4, n. 3 ( 2014).

    https://doi.org/10.4236/ojce.2014.43024

  21. Fiore, Alessandra / Quaranta, Giuseppe / Marano, Giuseppe Carlo / Monti, Giorgio (2016): Evolutionary Polynomial Regression–Based Statistical Determination of the Shear Capacity Equation for Reinforced Concrete Beams without Stirrups. In: Journal of Computing in Civil Engineering, v. 30, n. 1 (Januar 2016).

    https://doi.org/10.1061/(asce)cp.1943-5487.0000450

  22. Monti, Giorgio / Alessandri, Silvia / Santini, Silvia (2009): Design by testing: A procedure for the statistical determination of capacity models. In: Construction and Building Materials, v. 23, n. 4 (April 2009).

    https://doi.org/10.1016/j.conbuildmat.2008.07.016

  23. Monti, Giorgio / Petrone, Floriana (2016): Analytical thermo-mechanics 3D model of friction pendulum bearings. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 6 (Mai 2016).

    https://doi.org/10.1002/eqe.2693

  24. Gaetani, Angelo / Monti, Giorgio / Lourenço, Paulo B. / Marcari, Giancarlo (2016): Design and Analysis of Cross Vaults Along History. In: International Journal of Architectural Heritage, v. 10, n. 7 (März 2016).

    https://doi.org/10.1080/15583058.2015.1132020

  25. Di Miceli, Enrica / Monti, Giorgio / Bianco, Vincenzo / Filetici, Maria Grazia (2017): Assessment and Improvement of the Seismic Safety of the "Bastione Farnesiano", in the Central Archeological Area of Rome: A Calculation Method Between Need to Preserve and Uncertainties. In: International Journal of Architectural Heritage, v. 11, n. 2 ( 2017).

    https://doi.org/10.1080/15583058.2015.1124154

  26. Maruccio, Claudio / Quaranta, Giuseppe / De Lorenzis, Laura / Monti, Giorgio (2016): Energy harvesting from electrospun piezoelectric nanofibers for structural health monitoring of a cable-stayed bridge. In: Smart Materials and Structures, v. 25, n. 8 (August 2016).

    https://doi.org/10.1088/0964-1726/25/8/085040

  27. Monti, Giorgio / Filippou, Filip C. / Spacone, Enrico (1997): Finite Element for Anchored Bars under Cyclic Load Reversals. In: Journal of Structural Engineering (ASCE), v. 123, n. 5 (Mai 1997).

    https://doi.org/10.1061/(asce)0733-9445(1997)123:5(614)

  28. Bianco, Vincenzo / Barros, Joaquim A. / Monti, Giorgio (2009): Bond Model of NSM-FRP Strips in the Context of the Shear Strengthening of RC Beams. In: Journal of Structural Engineering (ASCE), v. 135, n. 6 (Juni 2009).

    https://doi.org/10.1061/(asce)0733-9445(2009)135:6(619)

  29. Marano, Giuseppe Carlo / Monti, Giorgio / Quaranta, Giuseppe (2011): Comparison of different optimum criteria for sensor placement in lattice towers. In: The Structural Design of Tall and Special Buildings, v. 20, n. 8 (November 2011).

    https://doi.org/10.1002/tal.605

  30. Pantazopoulou, Stavroula J. / Tastani, Souzana P. / Thermou, Georgia / Triantafillou, Thanasis / Monti, Giorgio / Bournas, Dionysios / Guadagnini, Maurizio (2016): Background to the European seismic design provisions for retrofitting RC elements using FRP materials. In: Structural Concrete, v. 17, n. 2 (April 2016).

    https://doi.org/10.1002/suco.201500102

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine