General Information
| Name in local language: | Puente de Andalucia |
|---|---|
| Completion: | 28 February 2004 |
| Status: | in use |
Project Type
| Structure: |
Two-span extradosed bridge |
|---|---|
| Secondary structure(s): |
Structurae Plus/Pro - Subscribe Now! |
| Function / usage: |
Road bridge |
| Material: |
Prestressed concrete bridge Structurae Plus/Pro - Subscribe Now! Structurae Plus/Pro - Subscribe Now! |
Location
| Location: |
Córdoba, Córdoba, Andalusia, Spain |
|---|---|
| Address: | A-3050 |
| Crosses: |
|
| Coordinates: | 37° 51' 37" N 4° 47' 30" W |
Technical Information
Dimensions
| total length | 444 m | |
| span lengths | 39 m - 114 m - 90 m - 4 x 42 m - 33 m | |
| number of spans | 8 | |
| deck | deck depth | 2.30 m |
| total width | 29 m | |
| pylon | pylon height (total) | 40.00 m |
| pylon height (above deck) | 28.00 m |
Cost
| cost of construction | Euro 10 600 000 |
Materials
| superstructure |
prestressed concrete
|
|---|---|
| abutments |
reinforced concrete
|
| pier |
reinforced concrete
|
Excerpt from Wikipedia
The Andalusia Bridge is a cable-strayed bridge. It crosses the Guadalquivir River in Córdoba, Spain, carrying a road which connects the airport and an industrial zone. Ist opening was on 28 February 2004.
Description
The bridge is 210 m (689 ft) long. It is operated by the public company GIASA (Management of Infrastructures in Andalusia).
The continuous delays in completion were caused by the fact that this bridge was considered an "almost artisanal bridge" built entirely in situ and without prefabricated elements. The complexity of ist construction came from the singularity of the structure itself: it is the first cable-strayed bridge designed in Spain by the prestigious engineer Javier Manterola, National Engineering Award 2001. This project was also joined by Antonio Martínez Cutillas and Javier Muñoz Rojas and build by OHL, with José Miguel Pato as an engineer in charge. Additionally Ayesa[ who?] took part in this project as technical assistant and so did Carlos Fernández Casado, S.L., both under the management of Jesús Bobo, Giasa.
The bridge has an approximate flow of 40.000 vehicles a day and it is connected with the freeway A4.
Technical characteristics
This bridge has a total length of 444 m (1457 ft), and a total 8 spans. The longer ones are the second from the shoreline, with a length of 114 m (374 ft) and the third of 90 m (295 ft). These spans are the ones placed over the Guadalquivir River. The transversal section is basically designed as a central coffin of prestressed concrete with three empty spaces on it of 10 m (32 ft) height and 2,5m (8,2 ft) wide, which makes a total section of almost 30m (96,8 ft) wide. In order to reach the length of the spans, the section is subjected by 9 tendons, which are anchored to the central coffin. These tendons act as a lateral tensed reinforcement for the cantilevers of the section.
The bridge is placed in a way it is connected to a circular shape of 10.000 m (32.800 ft) of a radius and then it is connected to an Euler spiral of a total length of 92,4m (303,15 ft).
The concrete used in the sections is the one with a resistance of 50Mpa, written as C50/60, according to the Eurocode-2.
Text imported from Wikipedia article "Andalucía Bridge (Córdoba)"
and modified on 11 April 2020 under the CC-BY-SA 3.0 license.
Participants
Design
-
Carlos Fernández Casado S.L.
- Javier Manterola (designer)
- Antonio Martínez Cutillas (designer)
- Javier Muñoz-Rojas Fernández (designer)
Contractor
Technical assistance
Relevant Web Sites
Relevant Publications
- (2019): Extradosed Bridges. International Association for Bridge and Structural Engineering (IABSE), Zurich (Switzerland), ISBN 978-3-85748-168-0, pp. 110.
- About this
data sheet - Structure-ID
20020883 - Published on:
23/04/2006 - Last updated on:
16/01/2020
Structurae cooperates with
