Smart Materials and Structures - v. 13, n. 4 (August 2004)

Published:	August 2004

Author(s)	Title	Page(s)
Song, G. / Qiao, P. / Sethi, V. / Prasad, A.	Active vibration control of a smart pultruded fiber-reinforced polymer I-beam	819-827
Singh, Amit / Pines, Darryll J. / Baz, Amr	Active/passive reduction of vibration of periodic one-dimensional structures using piezoelectric actuators	698-711
Agrawal, Brij N. / Chen, Hong-Jen	Algorithms for active vibration isolation on spacecraft using a Stewart platform	873-880
Karagülle, H. / Malgaca, L. / Öktem, H. F.	Analysis of active vibration control in smart structures by ANSYS	661-667
Ryu, D. H. / Wang, K. W.	Analysis of interfacial stresses and actuation authorities induced by surface-bonded piezoelectric actuators on curved flexible beams	753-761
Li, Fa-Xin / Fang, Dai-Ning / Soh, Ai-Kah	An analytical axisymmetric model for the poling-history dependent behavior of ferroelectric ceramics	668-675
Chrysochoidis, Nikolaos A. / Saravanos, Dimitris A.	Assessing the effects of delamination on the damped dynamic response of composite beams with piezoelectric actuators and sensors	733-742
Wereley, Norman M. / Lindler, Jason / Rosenfeld, Nicholas / Choi, Young-Tai	Biviscous damping behavior in electrorheological shock absorbers	743-752
Chehura, Edmon / Ye, Chen-Chun / Staines, Stephen E. / James, Stephen W. / Tatam, Ralph P.	Characterization of the response of fibre Bragg gratings fabricated in stress and geometrically induced high birefringence fibres to temperature and transverse load	888-895
Jha, Ratneshwar / He, Chengli	A comparative study of neural and conventional adaptive predictive controllers for vibration suppression	811-818
Ikeda, Tadashige / Nae, Florin Andrei / Naito, Hisashi / Matsuzaki, Yuji	Constitutive model of shape memory alloys for unidirectional loading considering inner hysteresis loops	916-925
Elahinia, Mohammad H. / Ahmadian, Mehdi / Ashrafiuon, Hashem	Design of a Kalman filter for rotary shape memory alloy actuators	691-697
Tua, P. S. / Quek, S. T. / Wang, Q.	Detection of cracks in plates using piezo-actuated Lamb waves	643-660
Purekar, A. S. / Pines, D. J. / Sundararaman, S. / Adams, D. E.	Directional piezoelectric phased array filters for detecting damage in isotropic plates	838-850
Zhang, J. X. / Sato, M. / Ishida, A.	The effect of two types of precipitates upon the structure of martensite in sputter-deposited Ti–Ni thin films	N37-N42
Lynch, Jerome Peter / Sundararajan, Arvind / Law, Kincho H. / Kiremidjian, Anne S. / Carryer, Ed	Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency	800-810
Ip, K. H. / Tse, Peter W. / Tam, H. Y.	Extraction of patch-induced Lamb waves using a wavelet transform	861-872
Zheng, Shijie / Wang, Xinwei / Chen, Wanji	The formulation of a refined hybrid enhanced assumed strain solid shell element and its application to model smart structures containing distributed piezoelectric sensors/actuators	N43-N50
Lin, Yung Bin / Chang, Kuo Chun / Chern, Jenn Chuan / Wang, Lon A.	The health monitoring of a prestressed concrete beam by using fiber Bragg grating sensors	712-718
Suresh, S. / Omkar, S. N. / Ganguli, Ranjan / Mani, V.	Identification of crack location and depth in a cantilever beam using a modular neural network approach	907-915
Tsuda, Hiroshi / Toyama, Nobuyuki / Urabe, Kei / Takatsubo, Junji	Impact damage detection in CFRP using fiber Bragg gratings	719-724
Ukita, Hiroo / Tanabe, Yuichiro / Okada, Atsushi	Improved photothermal deflection design of an integrated microbeam for application to an external-cavity tunable laser diode	970-975
Garcia, Ephrahim / Lobontiu, Nicolae	Induced-strain multimorphs for microscale sensory actuation design	725-732
Tobushi, H. / Matsui, R. / Hayashi, S. / Shimada, D.	The influence of shape-holding conditions on shape recovery of polyurethane-shape memory polymer foams	881-887
Nguyen, Cu-Hai / Pietrzko, Stanislaw / Buetikofer, Rudolf	The influence of temperature and bonding thickness on the actuation of a cantilever beam by PZT patches	851-860
Su, Zhongqing / Ye, Lin	An intelligent signal processing and pattern recognition technique for defect identification using an active sensor network	957-969
Aboudi, Jacob	Micromechanically based constitutive equations for shape-memory fiber composites undergoing large deformations	828-837
Chu, Xiangcheng / Qiu, Hongyun / Li, Longtu / Gui, Zhilun	Multi-DOF and sub-micrometer piezoelectric-electrorheological stepper motor	N51-N56
Hau, L. C. / Fung, E. H. K.	Multi-objective optimization of an active constrained layer damping treatment for shape control of flexible beams	896-906
Hafiz, H. R.	New photosensitive ultrathin films fabricated by the Langmuir–Blodgett technique	N68-N71
Costa Branco, P. J. / Dente, J. A.	On the electromechanics of a piezoelectric transducer using a bimorph cantilever undergoing asymmetric sensing and actuation	631-642
Kobayashi, M. / Jen, C.-K.	Piezoelectric thick bismuth titanate/lead zirconate titanate composite film transducers for smart NDE of metals	951-956
Ma, N. / Song, G. / Lee, H.-J.	Position control of shape memory alloy actuators with internal electrical resistance feedback using neural networks	777-783
Ganapathi, M. / Patel, B. P. / Touratier, M.	Refined finite element for piezoelectric laminated composite beams	N57-N67
Yu, Wenbin / Hodges, Dewey H.	A simple thermopiezoelastic model for smart composite plates with accurate stress recovery	926-938
Raja, S. / Sinha, P. K. / Prathap, G. / Dwarakanathan, D.	Thermally induced vibration control of composite plates and shells with piezoelectric active damping	939-950
Hou, Peng-Fei / Leung, Andrew Y. T.	The transient responses of magneto-electro-elastic hollow cylinders	762-776
Chen, Rong-Liang / Wang, Bor-Tsuen	The use of polyvinylidene fluoride films as sensors for the experimental modal analysis of structures	791-799
Lin, Yung Bin / Chern, Jenn Chuan / Chang, Kuo-Chun / Chan, Yin-Wen / Wang, Lon A.	The utilization of fiber Bragg grating sensors to monitor high performance concrete at elevated temperature	784-790
Mitra, Mira / Gopalakrishnan, S. / Bhat, M. Seetharama	Vibration control in a composite box beam with piezoelectric actuators	676-690

Author(s)

Title

Page(s)

Song, G. / Qiao, P. / Sethi, V. / Prasad, A.

Active vibration control of a smart pultruded fiber-reinforced polymer I-beam

819-827

Singh, Amit / Pines, Darryll J. / Baz, Amr

Active/passive reduction of vibration of periodic one-dimensional structures using piezoelectric actuators

698-711

Agrawal, Brij N. / Chen, Hong-Jen

Algorithms for active vibration isolation on spacecraft using a Stewart platform

873-880

Karagülle, H. / Malgaca, L. / Öktem, H. F.

Analysis of active vibration control in smart structures by ANSYS

661-667

Ryu, D. H. / Wang, K. W.

Analysis of interfacial stresses and actuation authorities induced by surface-bonded piezoelectric actuators on curved flexible beams

753-761

Li, Fa-Xin / Fang, Dai-Ning / Soh, Ai-Kah

An analytical axisymmetric model for the poling-history dependent behavior of ferroelectric ceramics

668-675

Chrysochoidis, Nikolaos A. / Saravanos, Dimitris A.

Assessing the effects of delamination on the damped dynamic response of composite beams with piezoelectric actuators and sensors

733-742

Wereley, Norman M. / Lindler, Jason / Rosenfeld, Nicholas / Choi, Young-Tai

Biviscous damping behavior in electrorheological shock absorbers

743-752

Chehura, Edmon / Ye, Chen-Chun / Staines, Stephen E. / James, Stephen W. / Tatam, Ralph P.

Characterization of the response of fibre Bragg gratings fabricated in stress and geometrically induced high birefringence fibres to temperature and transverse load

888-895

Jha, Ratneshwar / He, Chengli

A comparative study of neural and conventional adaptive predictive controllers for vibration suppression

811-818

Ikeda, Tadashige / Nae, Florin Andrei / Naito, Hisashi / Matsuzaki, Yuji

Constitutive model of shape memory alloys for unidirectional loading considering inner hysteresis loops

916-925

Elahinia, Mohammad H. / Ahmadian, Mehdi / Ashrafiuon, Hashem

Design of a Kalman filter for rotary shape memory alloy actuators

691-697

Tua, P. S. / Quek, S. T. / Wang, Q.

Detection of cracks in plates using piezo-actuated Lamb waves

643-660

Purekar, A. S. / Pines, D. J. / Sundararaman, S. / Adams, D. E.

Directional piezoelectric phased array filters for detecting damage in isotropic plates

838-850

Zhang, J. X. / Sato, M. / Ishida, A.

The effect of two types of precipitates upon the structure of martensite in sputter-deposited Ti–Ni thin films

N37-N42

Lynch, Jerome Peter / Sundararajan, Arvind / Law, Kincho H. / Kiremidjian, Anne S. / Carryer, Ed

Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency

800-810

Ip, K. H. / Tse, Peter W. / Tam, H. Y.

Extraction of patch-induced Lamb waves using a wavelet transform

861-872

Zheng, Shijie / Wang, Xinwei / Chen, Wanji

The formulation of a refined hybrid enhanced assumed strain solid shell element and its application to model smart structures containing distributed piezoelectric sensors/actuators

N43-N50

Lin, Yung Bin / Chang, Kuo Chun / Chern, Jenn Chuan / Wang, Lon A.

The health monitoring of a prestressed concrete beam by using fiber Bragg grating sensors

712-718

Suresh, S. / Omkar, S. N. / Ganguli, Ranjan / Mani, V.

Identification of crack location and depth in a cantilever beam using a modular neural network approach

907-915

Tsuda, Hiroshi / Toyama, Nobuyuki / Urabe, Kei / Takatsubo, Junji

Impact damage detection in CFRP using fiber Bragg gratings

719-724

Ukita, Hiroo / Tanabe, Yuichiro / Okada, Atsushi

Improved photothermal deflection design of an integrated microbeam for application to an external-cavity tunable laser diode

970-975

Garcia, Ephrahim / Lobontiu, Nicolae

Induced-strain multimorphs for microscale sensory actuation design

725-732

Tobushi, H. / Matsui, R. / Hayashi, S. / Shimada, D.

The influence of shape-holding conditions on shape recovery of polyurethane-shape memory polymer foams

881-887

Nguyen, Cu-Hai / Pietrzko, Stanislaw / Buetikofer, Rudolf

The influence of temperature and bonding thickness on the actuation of a cantilever beam by PZT patches

851-860

Su, Zhongqing / Ye, Lin

An intelligent signal processing and pattern recognition technique for defect identification using an active sensor network

957-969

Aboudi, Jacob

Micromechanically based constitutive equations for shape-memory fiber composites undergoing large deformations

828-837

Chu, Xiangcheng / Qiu, Hongyun / Li, Longtu / Gui, Zhilun

Multi-DOF and sub-micrometer piezoelectric-electrorheological stepper motor

N51-N56

Hau, L. C. / Fung, E. H. K.

Multi-objective optimization of an active constrained layer damping treatment for shape control of flexible beams

896-906

Hafiz, H. R.

New photosensitive ultrathin films fabricated by the Langmuir–Blodgett technique

N68-N71

Costa Branco, P. J. / Dente, J. A.

On the electromechanics of a piezoelectric transducer using a bimorph cantilever undergoing asymmetric sensing and actuation

631-642

Kobayashi, M. / Jen, C.-K.

Piezoelectric thick bismuth titanate/lead zirconate titanate composite film transducers for smart NDE of metals

951-956

Ma, N. / Song, G. / Lee, H.-J.

Position control of shape memory alloy actuators with internal electrical resistance feedback using neural networks

777-783

Ganapathi, M. / Patel, B. P. / Touratier, M.

Refined finite element for piezoelectric laminated composite beams

N57-N67

Yu, Wenbin / Hodges, Dewey H.

A simple thermopiezoelastic model for smart composite plates with accurate stress recovery

926-938

Raja, S. / Sinha, P. K. / Prathap, G. / Dwarakanathan, D.

Thermally induced vibration control of composite plates and shells with piezoelectric active damping

939-950

Hou, Peng-Fei / Leung, Andrew Y. T.

The transient responses of magneto-electro-elastic hollow cylinders

762-776

Chen, Rong-Liang / Wang, Bor-Tsuen

The use of polyvinylidene fluoride films as sensors for the experimental modal analysis of structures

791-799

Lin, Yung Bin / Chern, Jenn Chuan / Chang, Kuo-Chun / Chan, Yin-Wen / Wang, Lon A.

The utilization of fiber Bragg grating sensors to monitor high performance concrete at elevated temperature

784-790

Mitra, Mira / Gopalakrishnan, S. / Bhat, M. Seetharama

Vibration control in a composite box beam with piezoelectric actuators

676-690

Advertisement

Smart Materials and Structures - v. 13, n. 4 (August 2004)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Smart Materials and Structures - v. 13, n. 4 (August 2004)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.