Materials and Structures - v. 49, n. 6 (June 2016)

Published:	June 2016

Author(s)	Title	Page(s)
Yang, Xu / You, Zhanping / Jin, Can / Wang, Hainian	Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes	2493-2508
Bedon, Chiara / Amadio, Claudio	Analytical and numerical assessment of the strengthening effect of structural sealant joints for the prediction of the LTB critical moment in laterally restrained glass beams	2471-2492
Karcili, Mustafa / Alver, Ninel / Ohtsu, Masayasu	Application of AE rate-process analysis to damaged concrete structures due to earthquake	2171-2178
Chiozzi, Andrea / Simoni, Michele / Tralli, Antonio	Base isolation of heavy non-structural monolithic objects at the top of a masonry monumental construction	2113-2130
Zhao, Jun / Cai, Gaochuang / Yang, Junmin	Bond-slip behavior and embedment length of reinforcement in high volume fly ash concrete	2065-2082
Drougkas, Anastasios / Roca, Pere / Molins, Climent / Alegre, Vicente	Compressive testing of an early 20th century brick masonry pillar	2367-2381
Peng, Yuan-Yuan / Qian, Jia-Ru / Wang, Yu-Hang	Cyclic performance of precast concrete shear walls with a mortar–sleeve connection for longitudinal steel bars	2455-2469
Sobhan, Khaled / Gonzalez, Lillian / Reddy, D. V.	Durability of a pavement foundation made from recycled aggregate concrete subjected to cyclic wet–dry exposure and fatigue loading	2271-2284
Alaimo, Giuseppe / Valenza, Antonino / Enea, Daniele / Fiore, Vincenzo	The durability of basalt fibres reinforced polymer (BFRP) panels for cladding	2053-2064
Li, Xinxin / Wu, Zhimin / Zheng, Jianjun / Alahdal, Abdulmajid / Dong, Wei	Effect of loading rate on the bond behaviour of deformed steel bars in concrete subjected to lateral pressure	2097-2111
Jafarifar, Naeimeh / Pilakoutas, Kypros / Bennett, Terry	The effect of shrinkage cracks on the load bearing capacity of steel-fibre-reinforced roller-compacted-concrete pavements	2329-2347
Somé, Saannibe Ciryle / Gaudefroy, Vincent / Delaunay, Didier	Effect of vegetable oil additives on binder and mix properties: laboratory and field investigation	2197-2208
Nokken, Michelle R.	Electrical conductivity to determine maturity and activation energy in concretes	2209-2221
Zhang, S. S. / Teng, J. G.	End cover separation in RC beams strengthened in flexure with bonded FRP reinforcement: simplified finite element approach	2223-2236
Ji, Xiaoping / Jiang, Yingjun / Liu, Yanjin	Evaluation of the mechanical behaviors of cement-stabilized cold recycled mixtures produced by vertical vibration compaction method	2257-2270
Bader, Thomas K. / Schweigler, Michael / Hochreiner, Georg / Enquist, Bertil / Dorn, Michael / Serrano, Erik	Experimental characterization of the global and local behavior of multi-dowel LVL-connections under complex loading	2407-2424
Khodaii, A. / Mousavi, E. S. / Khedmati, M. / Iranitalab, A.	Identification of dominant parameters for stripping potential in warm mix asphalt using response surface methodology	2425-2437
Rovero, L. / Alecci, V. / Mechelli, J. / Tonietti, U. / De Stefano, M.	Masonry walls with irregular texture of L'Aquila (Italy) seismic area: validation of a method for the evaluation of masonry quality	2297-2314
Kunecký, Jiří / Arciszewska-Kędzior, Anna / Sebera, Václav / Hasníková, Hana	Mechanical performance of dovetail joint related to the global stiffness of timber roof structures	2315-2327
Masad, Noor / Zollinger, Dan / Kim, Sun-Myung / Grasley, Zachary	Meso-scale model for simulations of concrete subjected to cryogenic temperatures	2141-2159
Fagà, Ettore / Ceresa, Paola / Nascimbene, Roberto / Moratti, Matteo / Pavese, Alberto	Modelling curved surface sliding bearings with bilinear constitutive law: effects on the response of seismically isolated buildings	2179-2196
Boshoff, William Peter / Altmann, Frank / Adendorff, Christo Johan / Mechtcherine, Viktor	A new approach for modelling the ingress of deleterious materials in cracked strain hardening cement-based composites	2285-2295
Hailesilassie, Biruk W. / Hugener, Martin / Bieder, Andrea / Partl, Manfred N.	New experimental methods for characterizing formation and decay of foam bitumen	2439-2454
Guo, Xiaolu / Shi, Huisheng / Wu, Kai / Ju, Zhenghui / Dick, Warren A.	Performance and risk assessment of alinite cement-based materials from municipal solid waste incineration fly ash (MSWIFA)	2383-2391
Yan, Libo	Plain concrete cylinders and beams externally strengthened with natural flax fabric reinforced epoxy composites	2083-2095
Jiang, Jia-Fei / Wu, Yu-Fei	Plasticity-based criterion for confinement design of FRP jacketed concrete columns	2035-2051
Otieno, M. / Beushausen, H. / Alexander, M.	Resistivity-based chloride-induced corrosion rate prediction models and hypothetical framework for interpretation of resistivity measurements in cracked RC structures	2349-2366
Myslicki, Sebastian / Vallée, Till / Walther, Frank	Short-time procedure for fatigue assessment of beech wood and adhesively bonded beech wood joints	2161-2170
Laskar, Arghadeep / Mo, Y. L. / Hsu, Thomas T. C.	Simulation of post-tensioned bridge columns under reversed-cyclic loads	2237-2256
Zhai, Ximei / Wang, Yonghui / Wang, Heng	Thermal stress analysis of concrete wall of LNG tank during construction period	2393-2406
Ponikiewski, Tomasz / Katzer, Jacek	X-ray computed tomography of fibre reinforced self-compacting concrete as a tool of assessing its flexural behaviour	2131-2140

Author(s)

Title

Page(s)

Yang, Xu / You, Zhanping / Jin, Can / Wang, Hainian

Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes

2493-2508

Bedon, Chiara / Amadio, Claudio

Analytical and numerical assessment of the strengthening effect of structural sealant joints for the prediction of the LTB critical moment in laterally restrained glass beams

2471-2492

Karcili, Mustafa / Alver, Ninel / Ohtsu, Masayasu

Application of AE rate-process analysis to damaged concrete structures due to earthquake

2171-2178

Chiozzi, Andrea / Simoni, Michele / Tralli, Antonio

Base isolation of heavy non-structural monolithic objects at the top of a masonry monumental construction

2113-2130

Zhao, Jun / Cai, Gaochuang / Yang, Junmin

Bond-slip behavior and embedment length of reinforcement in high volume fly ash concrete

2065-2082

Drougkas, Anastasios / Roca, Pere / Molins, Climent / Alegre, Vicente

Compressive testing of an early 20th century brick masonry pillar

2367-2381

Peng, Yuan-Yuan / Qian, Jia-Ru / Wang, Yu-Hang

Cyclic performance of precast concrete shear walls with a mortar–sleeve connection for longitudinal steel bars

2455-2469

Sobhan, Khaled / Gonzalez, Lillian / Reddy, D. V.

Durability of a pavement foundation made from recycled aggregate concrete subjected to cyclic wet–dry exposure and fatigue loading

2271-2284

Alaimo, Giuseppe / Valenza, Antonino / Enea, Daniele / Fiore, Vincenzo

The durability of basalt fibres reinforced polymer (BFRP) panels for cladding

2053-2064

Li, Xinxin / Wu, Zhimin / Zheng, Jianjun / Alahdal, Abdulmajid / Dong, Wei

Effect of loading rate on the bond behaviour of deformed steel bars in concrete subjected to lateral pressure

2097-2111

Jafarifar, Naeimeh / Pilakoutas, Kypros / Bennett, Terry

The effect of shrinkage cracks on the load bearing capacity of steel-fibre-reinforced roller-compacted-concrete pavements

2329-2347

Somé, Saannibe Ciryle / Gaudefroy, Vincent / Delaunay, Didier

Effect of vegetable oil additives on binder and mix properties: laboratory and field investigation

2197-2208

Nokken, Michelle R.

Electrical conductivity to determine maturity and activation energy in concretes

2209-2221

Zhang, S. S. / Teng, J. G.

End cover separation in RC beams strengthened in flexure with bonded FRP reinforcement: simplified finite element approach

2223-2236

Ji, Xiaoping / Jiang, Yingjun / Liu, Yanjin

Evaluation of the mechanical behaviors of cement-stabilized cold recycled mixtures produced by vertical vibration compaction method

2257-2270

Bader, Thomas K. / Schweigler, Michael / Hochreiner, Georg / Enquist, Bertil / Dorn, Michael / Serrano, Erik

Experimental characterization of the global and local behavior of multi-dowel LVL-connections under complex loading

2407-2424

Khodaii, A. / Mousavi, E. S. / Khedmati, M. / Iranitalab, A.

Identification of dominant parameters for stripping potential in warm mix asphalt using response surface methodology

2425-2437

Rovero, L. / Alecci, V. / Mechelli, J. / Tonietti, U. / De Stefano, M.

Masonry walls with irregular texture of L'Aquila (Italy) seismic area: validation of a method for the evaluation of masonry quality

2297-2314

Kunecký, Jiří / Arciszewska-Kędzior, Anna / Sebera, Václav / Hasníková, Hana

Mechanical performance of dovetail joint related to the global stiffness of timber roof structures

2315-2327

Masad, Noor / Zollinger, Dan / Kim, Sun-Myung / Grasley, Zachary

Meso-scale model for simulations of concrete subjected to cryogenic temperatures

2141-2159

Fagà, Ettore / Ceresa, Paola / Nascimbene, Roberto / Moratti, Matteo / Pavese, Alberto

Modelling curved surface sliding bearings with bilinear constitutive law: effects on the response of seismically isolated buildings

2179-2196

Boshoff, William Peter / Altmann, Frank / Adendorff, Christo Johan / Mechtcherine, Viktor

A new approach for modelling the ingress of deleterious materials in cracked strain hardening cement-based composites

2285-2295

Hailesilassie, Biruk W. / Hugener, Martin / Bieder, Andrea / Partl, Manfred N.

New experimental methods for characterizing formation and decay of foam bitumen

2439-2454

Guo, Xiaolu / Shi, Huisheng / Wu, Kai / Ju, Zhenghui / Dick, Warren A.

Performance and risk assessment of alinite cement-based materials from municipal solid waste incineration fly ash (MSWIFA)

2383-2391

Yan, Libo

Plain concrete cylinders and beams externally strengthened with natural flax fabric reinforced epoxy composites

2083-2095

Jiang, Jia-Fei / Wu, Yu-Fei

Plasticity-based criterion for confinement design of FRP jacketed concrete columns

2035-2051

Otieno, M. / Beushausen, H. / Alexander, M.

Resistivity-based chloride-induced corrosion rate prediction models and hypothetical framework for interpretation of resistivity measurements in cracked RC structures

2349-2366

Myslicki, Sebastian / Vallée, Till / Walther, Frank

Short-time procedure for fatigue assessment of beech wood and adhesively bonded beech wood joints

2161-2170

Laskar, Arghadeep / Mo, Y. L. / Hsu, Thomas T. C.

Simulation of post-tensioned bridge columns under reversed-cyclic loads

2237-2256

Zhai, Ximei / Wang, Yonghui / Wang, Heng

Thermal stress analysis of concrete wall of LNG tank during construction period

2393-2406

Ponikiewski, Tomasz / Katzer, Jacek

X-ray computed tomography of fibre reinforced self-compacting concrete as a tool of assessing its flexural behaviour

2131-2140

Advertisement

Materials and Structures - v. 49, n. 6 (June 2016)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 49, n. 6 (June 2016)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.