Engineering Structures - June 2019

Published:	June 2019

Author(s)	Title	Page(s)
Yang, Jia-Hua / Lam, Heung-Fai / Beck, James L.	Bayes-Mode-ID: A Bayesian modal-component-sampling method for operational modal analysis	222-240
Ding, Tao / Xiao, Jianzhuang / Khan, Asad-ur-Rehman	Behavior of concrete beam-column frame joints with DfD connections: A simulation study with interface modelling	347-358
Dilek, Ahmet U. / Oguz, Ali D. / Satis, Furkan / Gokdel, Yigit D. / Ozbek, Muammer	Condition monitoring of wind turbine blades and tower via an automated laser scanning system	25-34
Gottsäter, Erik / Johansson, Morgan / Plos, Mario / Larsson Ivanov, Oskar	Crack widths in base restrained walls subjected to restraint loading	272-285
Karadoğan, Faruk / Yuksel, Ercan / Khajehdehi, Arastoo / Özkaynak, Hasan / Güllü, Ahmet / Şenol, Erkan	Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions	423-439
Zhang, Jianwei / Li, Xiangyu / Cao, Wanlin / Yu, Cheng	Cyclic behavior of steel tube-reinforced high-strength concrete composite columns with high-strength steel bars	565-579
Lee, Chang Seok / Han, Sang Whan	Cyclic behaviour of lightly-reinforced concrete columns with short lap splices subjected to unidirectional and bidirectional loadings	373-384
Chou, Chung-Che / Wu, Sung-Cheng	Cyclic lateral load test and finite element analysis of high-strength concrete-filled steel box columns under high axial compression	89-99
Xiong, Chen / Lu, Xinzheng / Lin, Xuchuan	Damage assessment of shear wall components for RC frame–shear wall buildings using story curvature as engineering demand parameter	77-88
Lyu, Z. / Málaga-Chuquitaype, Christian / Ruiz-Teran, A. M.	Design of timber-concrete composite (TCC) bridges with under-deck stay cables	589-604
Nurmi, Sara / Hoult, Neil A. / Howell, Simon D.	Distributed strain monitoring of two-way slabs	580-588
Zhang, Sigong / Zhou, Jianhui / Niederwestberg, Jan / Chui, Ying Hei	Effect of end support restraints on vibration performance of cross laminated timber floors: An analytical approach	186-194
Özbek, Eray / Aykac, Bengi / Aykac, Sabahattin	The effects of brick walls strengthened with perforated steel plates on frame behavior	62-76
O'Ceallaigh, Conan / Harte, Annette M.	The elastic and ductile behaviour of CLT wall-floor connections and the influence of fastener length	319-331
Li, Zhi / Liu, Yanzhi / Huo, Jingsi / Elghazouli, Ahmed Y.	Experimental and analytical assessment of RC joints with varying reinforcement detailing under push-down loading before and after fires	550-564
Alwashali, Hamood / Sen, Debasish / Jin, Kiwoong / Maeda, Masaki	Experimental investigation of influences of several parameters on seismic capacity of masonry infilled reinforced concrete frame	11-24
Hai, Le-Tian / Li, Guo-Qiang / Wang, Yan-Bo / Sun, Fei-Fei / Jin, Hua-jian	Experimental investigation on cyclic behavior of Q690D high strength steel H-section beam-columns about strong axis	157-173
De Risi, Maria Teresa / Di Domenico, Mariano / Ricci, Paolo / Verderame, Gerardo Mario / Manfredi, Gaetano	Experimental investigation on the influence of the aspect ratio on the in-plane/out-of-plane interaction for masonry infills in RC frames	523-540
Gou, Shuangke / Ding, Ran / Fan, Jiansheng / Nie, Xin / Zhang, Jun	Experimental study on seismic performance of precast LSECC/RC composite joints with U-shaped LSECC beam shells	618-634
Alocci, Cristiano / Valvo, Paolo S.	Feasibility study of a hybrid FRP-steel cable-stayed pedestrian swing bridge	359-372
Kang, Junsuk	Finite element analysis for deeply buried concrete pipes in proposed imperfect trench installations with expanded polystyrene (EPS) foams	286-295
Cao, Qi / Zhou, Jianpu / Wu, Zhimin / Ma, Zhongguo John	Flexural behavior of prestressed CFRP reinforced concrete beams by two different tensioning methods	411-422
Zhang, Yijian / DesRoches, Reginald / Tien, Iris	Impact of corrosion on risk assessment of shear-critical and short lap-spliced bridges	260-271
Terzic, Vesna / Kolozvari, Kristijan / Saldana, Daniel	Implications of modeling approaches on seismic performance of low- and mid-rise office and hospital shear wall buildings	129-146
Mitra, Nilanjan / Patra, AlakKumar / Mondal, Shyamal / Datta, Prasanta Kumar	Interfacial delamination crack profile estimation in polymer foam-cored sandwich composites	635-643
Aguaguiña, Mario / Zhou, Ying / Zhou, Yun	Loading protocols for qualification testing of BRBs considering global performance requirements	440-457
Oskoui, Elias Abdoli / Taylor, Todd / Ansari, Farhad	Method and monitoring approach for distributed detection of damage in multi-span continuous bridges	385-395
Wang, Hao / Mao, Jian-Xiao / Spencer, Billie F.	A monitoring-based approach for evaluating dynamic responses of riding vehicle on long-span bridge under strong winds	35-47
Guíñez, Felipe / Santa María, Hernán / Almazán, José Luis	Monotonic and cyclic behaviour of wood frame shear walls for mid-height timber buildings	100-110
Kim, Han-Soo / Lee, Hye-Lym / Lim, You-Jin	Multi-objective optimization of dual-purpose outriggers in tall buildings to reduce lateral displacement and differential axial shortening	296-308
Poliotti, Mauro / Bairán, Jesús-Miguel	A new concrete plastic-damage model with an evolutive dilatancy parameter	541-549
He, Xiao-Huang-Can / Yi, Wei-Jian / Yuan, Xian-Xun	A non-iterative progressive collapse design method for RC structures based on virtual thermal pushdown analysis	484-496
Shi, Jin-Xing / Kozono, Sho / Shimoda, Masatoshi / Takino, Masahiro / Wada, Daiki / Liu, Yang	Non-parametric shape design optimization of elastic-plastic shear panel dampers under cyclic loading	48-61
Sun, Feifei / Xiao, Lei / Bursi, Oreste Salvatore	Optimal design and novel configuration of a locally resonant periodic foundation (LRPF) for seismic protection of fuel storage tanks	147-156
Yang, Lei / Qi, Chongchong / Lin, Xiaoshan / Li, Junwei / Dong, Xiangjian	Prediction of dynamic increase factor for steel fibre reinforced concrete using a hybrid artificial intelligence model	309-318
Pakos, Wojciech / Grosel, Jacek	Reduction of cable vibrations in a cable stayed bridge under biharmonic excitation	1-10
Gu, Qian / Dong, Ge / Wang, Xiang / Jiang, Hongbin / Peng, Shaomin	Research on pseudo-static cyclic tests of precast concrete shear walls with vertical rebar lapping in grout-filled constrained hole	396-410
Yue, Jianguang / Qian, Jiang / Beskos, Dimitri E.	Seismic damage performance levels for concrete encased steel columns using acoustic emission tests and finite element analysis	471-483
Naeem, Asad / Kim, Jinkoo	Seismic performance evaluation of a multi-slit damper	332-346
Wang, Jing-Quan / Li, Shuai / Hedayati Dezfuli, Farshad / Shahria Alam, M.	Sensitivity analysis and multi-criteria optimization of SMA cable restrainers for longitudinal seismic protection of isolated simply supported highway bridges	509-522
Xie, Yazhou / DesRoches, Reginald	Sensitivity of seismic demands and fragility estimates of a typical California highway bridge to uncertainties in its soil-structure interaction modeling	605-617
Przybylski, Jacek / Kuliński, Krzysztof	Shape enhancement of an eccentrically loaded column using piezoelectric actuator	644-654
Mohammed, Tarek Uddin / Shikdar, Kamal Hossain / Awal, M. A.	Shear strength of RC beam made with recycled brick aggregate	497-508
Zhang, Qingtian / Xiao, Jianzhuang / Liao, Qingxiang / Duan, Zhenhua	Structural behavior of seawater sea-sand concrete shear wall reinforced with GFRP bars	458-470
Ahmadi, Seyed Ali / Pashaei, Mohammad-Hadi / Jafari-Talookolaei, Ramazan-Ali	Three-dimensional elastic-plastic pulse response and energy absorption of curved composite sandwich panel using DQ – Newmark method	111-128
Mpidi Bita, Hercend / Tannert, Thomas	Tie-force procedure for disproportionate collapse prevention of CLT platform-type construction	195-205
Wang, Xiaowei / Fang, Jiaxin / Zhou, Lianxu / Ye, Aijun	Transverse seismic failure mechanism and ductility of reinforced concrete pylon for long span cable-stayed bridges: Model test and numerical analysis	206-221
Gong, Yongqiang / Cao, Liang / Laflamme, Simon / Ricles, James / Quiel, Spencer / Taylor, Douglas	Variable friction cladding connection for seismic mitigation	243-259
Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.	Visual damage at flexural response milestones for blast-resistant precast concrete panels with varying reinforcement	174-185

Author(s)

Title

Page(s)

Yang, Jia-Hua / Lam, Heung-Fai / Beck, James L.

Bayes-Mode-ID: A Bayesian modal-component-sampling method for operational modal analysis

222-240

Ding, Tao / Xiao, Jianzhuang / Khan, Asad-ur-Rehman

Behavior of concrete beam-column frame joints with DfD connections: A simulation study with interface modelling

347-358

Dilek, Ahmet U. / Oguz, Ali D. / Satis, Furkan / Gokdel, Yigit D. / Ozbek, Muammer

Condition monitoring of wind turbine blades and tower via an automated laser scanning system

25-34

Gottsäter, Erik / Johansson, Morgan / Plos, Mario / Larsson Ivanov, Oskar

Crack widths in base restrained walls subjected to restraint loading

272-285

Karadoğan, Faruk / Yuksel, Ercan / Khajehdehi, Arastoo / Özkaynak, Hasan / Güllü, Ahmet / Şenol, Erkan

Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions

423-439

Zhang, Jianwei / Li, Xiangyu / Cao, Wanlin / Yu, Cheng

Cyclic behavior of steel tube-reinforced high-strength concrete composite columns with high-strength steel bars

565-579

Lee, Chang Seok / Han, Sang Whan

Cyclic behaviour of lightly-reinforced concrete columns with short lap splices subjected to unidirectional and bidirectional loadings

373-384

Chou, Chung-Che / Wu, Sung-Cheng

Cyclic lateral load test and finite element analysis of high-strength concrete-filled steel box columns under high axial compression

89-99

Xiong, Chen / Lu, Xinzheng / Lin, Xuchuan

Damage assessment of shear wall components for RC frame–shear wall buildings using story curvature as engineering demand parameter

77-88

Lyu, Z. / Málaga-Chuquitaype, Christian / Ruiz-Teran, A. M.

Design of timber-concrete composite (TCC) bridges with under-deck stay cables

589-604

Nurmi, Sara / Hoult, Neil A. / Howell, Simon D.

Distributed strain monitoring of two-way slabs

580-588

Zhang, Sigong / Zhou, Jianhui / Niederwestberg, Jan / Chui, Ying Hei

Effect of end support restraints on vibration performance of cross laminated timber floors: An analytical approach

186-194

Özbek, Eray / Aykac, Bengi / Aykac, Sabahattin

The effects of brick walls strengthened with perforated steel plates on frame behavior

62-76

O'Ceallaigh, Conan / Harte, Annette M.

The elastic and ductile behaviour of CLT wall-floor connections and the influence of fastener length

319-331

Li, Zhi / Liu, Yanzhi / Huo, Jingsi / Elghazouli, Ahmed Y.

Experimental and analytical assessment of RC joints with varying reinforcement detailing under push-down loading before and after fires

550-564

Alwashali, Hamood / Sen, Debasish / Jin, Kiwoong / Maeda, Masaki

Experimental investigation of influences of several parameters on seismic capacity of masonry infilled reinforced concrete frame

11-24

Hai, Le-Tian / Li, Guo-Qiang / Wang, Yan-Bo / Sun, Fei-Fei / Jin, Hua-jian

Experimental investigation on cyclic behavior of Q690D high strength steel H-section beam-columns about strong axis

157-173

De Risi, Maria Teresa / Di Domenico, Mariano / Ricci, Paolo / Verderame, Gerardo Mario / Manfredi, Gaetano

Experimental investigation on the influence of the aspect ratio on the in-plane/out-of-plane interaction for masonry infills in RC frames

523-540

Gou, Shuangke / Ding, Ran / Fan, Jiansheng / Nie, Xin / Zhang, Jun

Experimental study on seismic performance of precast LSECC/RC composite joints with U-shaped LSECC beam shells

618-634

Alocci, Cristiano / Valvo, Paolo S.

Feasibility study of a hybrid FRP-steel cable-stayed pedestrian swing bridge

359-372

Kang, Junsuk

Finite element analysis for deeply buried concrete pipes in proposed imperfect trench installations with expanded polystyrene (EPS) foams

286-295

Cao, Qi / Zhou, Jianpu / Wu, Zhimin / Ma, Zhongguo John

Flexural behavior of prestressed CFRP reinforced concrete beams by two different tensioning methods

411-422

Zhang, Yijian / DesRoches, Reginald / Tien, Iris

Impact of corrosion on risk assessment of shear-critical and short lap-spliced bridges

260-271

Terzic, Vesna / Kolozvari, Kristijan / Saldana, Daniel

Implications of modeling approaches on seismic performance of low- and mid-rise office and hospital shear wall buildings

129-146

Mitra, Nilanjan / Patra, AlakKumar / Mondal, Shyamal / Datta, Prasanta Kumar

Interfacial delamination crack profile estimation in polymer foam-cored sandwich composites

635-643

Aguaguiña, Mario / Zhou, Ying / Zhou, Yun

Loading protocols for qualification testing of BRBs considering global performance requirements

440-457

Oskoui, Elias Abdoli / Taylor, Todd / Ansari, Farhad

Method and monitoring approach for distributed detection of damage in multi-span continuous bridges

385-395

Wang, Hao / Mao, Jian-Xiao / Spencer, Billie F.

A monitoring-based approach for evaluating dynamic responses of riding vehicle on long-span bridge under strong winds

35-47

Guíñez, Felipe / Santa María, Hernán / Almazán, José Luis

Monotonic and cyclic behaviour of wood frame shear walls for mid-height timber buildings

100-110

Kim, Han-Soo / Lee, Hye-Lym / Lim, You-Jin

Multi-objective optimization of dual-purpose outriggers in tall buildings to reduce lateral displacement and differential axial shortening

296-308

Poliotti, Mauro / Bairán, Jesús-Miguel

A new concrete plastic-damage model with an evolutive dilatancy parameter

541-549

He, Xiao-Huang-Can / Yi, Wei-Jian / Yuan, Xian-Xun

A non-iterative progressive collapse design method for RC structures based on virtual thermal pushdown analysis

484-496

Shi, Jin-Xing / Kozono, Sho / Shimoda, Masatoshi / Takino, Masahiro / Wada, Daiki / Liu, Yang

Non-parametric shape design optimization of elastic-plastic shear panel dampers under cyclic loading

48-61

Sun, Feifei / Xiao, Lei / Bursi, Oreste Salvatore

Optimal design and novel configuration of a locally resonant periodic foundation (LRPF) for seismic protection of fuel storage tanks

147-156

Yang, Lei / Qi, Chongchong / Lin, Xiaoshan / Li, Junwei / Dong, Xiangjian

Prediction of dynamic increase factor for steel fibre reinforced concrete using a hybrid artificial intelligence model

309-318

Pakos, Wojciech / Grosel, Jacek

Reduction of cable vibrations in a cable stayed bridge under biharmonic excitation

1-10

Gu, Qian / Dong, Ge / Wang, Xiang / Jiang, Hongbin / Peng, Shaomin

Research on pseudo-static cyclic tests of precast concrete shear walls with vertical rebar lapping in grout-filled constrained hole

396-410

Yue, Jianguang / Qian, Jiang / Beskos, Dimitri E.

Seismic damage performance levels for concrete encased steel columns using acoustic emission tests and finite element analysis

471-483

Naeem, Asad / Kim, Jinkoo

Seismic performance evaluation of a multi-slit damper

332-346

Wang, Jing-Quan / Li, Shuai / Hedayati Dezfuli, Farshad / Shahria Alam, M.

Sensitivity analysis and multi-criteria optimization of SMA cable restrainers for longitudinal seismic protection of isolated simply supported highway bridges

509-522

Xie, Yazhou / DesRoches, Reginald

Sensitivity of seismic demands and fragility estimates of a typical California highway bridge to uncertainties in its soil-structure interaction modeling

605-617

Przybylski, Jacek / Kuliński, Krzysztof

Shape enhancement of an eccentrically loaded column using piezoelectric actuator

644-654

Mohammed, Tarek Uddin / Shikdar, Kamal Hossain / Awal, M. A.

Shear strength of RC beam made with recycled brick aggregate

497-508

Zhang, Qingtian / Xiao, Jianzhuang / Liao, Qingxiang / Duan, Zhenhua

Structural behavior of seawater sea-sand concrete shear wall reinforced with GFRP bars

458-470

Ahmadi, Seyed Ali / Pashaei, Mohammad-Hadi / Jafari-Talookolaei, Ramazan-Ali

Three-dimensional elastic-plastic pulse response and energy absorption of curved composite sandwich panel using DQ – Newmark method

111-128

Mpidi Bita, Hercend / Tannert, Thomas

Tie-force procedure for disproportionate collapse prevention of CLT platform-type construction

195-205

Wang, Xiaowei / Fang, Jiaxin / Zhou, Lianxu / Ye, Aijun

Transverse seismic failure mechanism and ductility of reinforced concrete pylon for long span cable-stayed bridges: Model test and numerical analysis

206-221

Gong, Yongqiang / Cao, Liang / Laflamme, Simon / Ricles, James / Quiel, Spencer / Taylor, Douglas

Variable friction cladding connection for seismic mitigation

243-259

Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.

Visual damage at flexural response milestones for blast-resistant precast concrete panels with varying reinforcement

174-185

Advertisement

Engineering Structures - June 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - June 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.