Engineering Structures - December 2014

Published:	December 2014

Author(s)	Title	Page(s)
Riera, Jorge Daniel / Miguel, Letícia Fleck Fadel / Iturrioz, Ignacio	Assessment of Brazilian tensile test by means of the truss-like Discrete Element Method (DEM) with imperfect mesh	10-21
Lam, H. F. / Hu, Q. / Wong, M. T.	The Bayesian methodology for the detection of railway ballast damage under a concrete sleeper	289-301
Lin, Zhaofei / Liu, Yuqing / He, Jun	Behavior of stud connectors under combined shear and tension loads	362-376
LeBorgne, M. R. / Ghannoum, W. M.	Calibrated analytical element for lateral-strength degradation of reinforced concrete columns	35-48
Conceição, José / Faria, Rui / Azenha, Miguel / Mamede, Flávio / Souza, Flávio	Early-age behaviour of the concrete surrounding a turbine spiral case: Monitoring and thermo-mechanical modelling	327-340
Hu, Y. / Baniotopoulos, C. / Yang, J.	Effect of internal stiffening rings and wall thickness on the structural response of steel wind turbine towers	148-161
Roh, Hwasung / Ou, Yu-Chen / Kim, Jinkyu / Kim, WooSeok	Effect of yielding level and post-yielding stiffness ratio of ED bars on seismic performance of PT rocking bridge piers	454-463
Ogueta-Gutiérrez, M. / Franchini, S. / Alonso, G.	Effects of bird protection barriers on the aerodynamic and aeroelastic behaviour of high speed train bridges	22-34
Shafaei, Jalil / Zareian, Mohammad Sajjad / Hosseini, Abdollah / Marefat, Mohammad Sadegh	Effects of joint flexibility on lateral response of reinforced concrete frames	412-431
Nandan, Harsh / Singh, Mahendra P.	Effects of thermal environment on structural frequencies: Part I – A simulation study	480-490
Nandan, Harsh / Singh, Mahendra P.	Effects of thermal environment on structural frequencies: Part II – A system identification model	491-498
Khampanit, Amnart / Leelataviwat, Sutat / Kochanin, Jensak / Warnitchai, Pennung	Energy-based seismic strengthening design of non-ductile reinforced concrete frames using buckling-restrained braces	110-122
Gong, Kuangmin / Ding, Jie / Chen, Xinzhong	Estimation of long-term extreme response of operational and parked wind turbines: Validation and some new insights	135-147
Vessby, Johan / Källsner, Bo / Olsson, Anders / Girhammar, Ulf Arne	Evaluation of softening behaviour of timber light-frame walls subjected to in-plane forces using simple FE models	464-479
Moreira, Susana / Ramos, Luís F. / Oliveira, Daniel V. / Lourenço, Paulo B.	Experimental behavior of masonry wall-to-timber elements connections strengthened with injection anchors	98-109
D'Amico, B. / Kermani, A. / Zhang, H.	Form finding and structural analysis of actively bent timber grid shells	195-207
Malekjafarian, A. / OBrien, E. J.	Identification of bridge mode shapes using Short Time Frequency Domain Decomposition of the responses measured in a passing vehicle	386-397
Yu, Jiayong / Meng, Xiaolin / Shao, Xudong / Yan, Banfu / Yang, Lei	Identification of dynamic displacements and modal frequencies of a medium-span suspension bridge using multimode GNSS processing	432-443
Song, Ruiqiang / Li, Yue / van de Lindt, John W.	Impact of earthquake ground motion characteristics on collapse risk of post-mainshock buildings considering aftershocks	349-361
Abidelah, Anis / Bouchaïr, Abdelhamid / Kerdal, Djamel Elddine	Influence of the flexural rigidity of the bolt on the behavior of the T-stub steel connection	181-194
Curadelli, O. / Amani, M.	Integrated structure-passive control design of linear structures under seismic excitations	256-264
Ed-dinari, Aberrahmane / Mottaqui, Hicham / Braikat, Bouazza / Jamal, Mohammad / Mohri, Foudil / Damil, Noureddine	Large torsion analysis of thin-walled open sections beams by the Asymptotic Numerical Method	240-255
Ibrahim, Sherif A.	Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs	123-134
Dias-Da-Costa, D. / Carmo, R. N. F. / Graça-e-Costa, R. / Valença, J. / Alfaiate, J.	Longitudinal reinforcement ratio in lightweight aggregate concrete beams	219-229
Xu, Qingfeng / Harries, Kent / Li, Xiangmin / Liu, Qiong / Gottron, Jennifer	Mechanical properties of structural bamboo following immersion in water	230-239
Pagani, Roberto / Bocciarelli, Massimiliano / Carvelli, Valter / Pisani, Marco Andrea	Modelling high temperature effects on bridge slabs reinforced with GFRP rebars	318-326
Shin, Jinwon / Whittaker, Andrew S. / Cormie, David / Wilkinson, Will	Numerical modeling of close-in detonations of high explosives	88-97
Viet, L. D. / Nghi, N. B.	On a nonlinear single-mass two-frequency pendulum tuned mass damper to reduce horizontal vibration	175-180
Kozmar, Hrvoje / Procino, Lorenzo / Borsani, Alessandra / Bartoli, Gianni	Optimizing height and porosity of roadway wind barriers for viaducts and bridges	49-61
Zheng, Jian-Jun / Dai, Jian-Guo	Prediction of the nonlinear pull-out response of FRP ground anchors using an analytical transfer matrix method	377-385
Mahdavipour, M. A. / Deylami, A.	Probabilistic assessment of strain hardening ratio effect on residual deformation demands of Buckling-Restrained Braced Frames	302-308
Moharrami, M. / Tootkaboni, M.	Reducing response of offshore platforms to wave loads using hydrodynamic buoyant mass dampers	162-174
Azinović, Boris / Koren, David / Kilar, Vojko	The seismic response of low-energy buildings founded on a thermal insulation layer – A parametric study	398-411
Shafaei, Jalil / Hosseini, Abdollah / Marefat, Mohammad Sadegh	Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles	265-288
Colajanni, Piero / La Mendola, Lidia / Mancini, Giuseppe / Recupero, Antonino / Spinella, Nino	Shear capacity in concrete beams reinforced by stirrups with two different inclinations	444-453
Breveglieri, Matteo / Aprile, Alessandra / Barros, Joaquim A. O.	Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars	76-87
Thenozhi, Suresh / Yu, Wen	Stability analysis of active vibration control of building structures using PD/PID control	208-218
Bednarz, Łukasz J. / Jasienko, Jerzy / Rutkowski, Marcin / Nowak, Tomasz P.	Strengthening and long-term monitoring of the structure of an historical church presbytery	62-75
Terán-Guillén, J. / Cicero, S. / Garcia, T. / Alvarez, J. A. / Martínez-Madrid, M. / Pérez-Quiroz, J. T.	Structural integrity assessment of the cast steel upper anchorage elements used in a cable stayed bridge	309-317
Zhang, Hao / Ellingwood, Bruce R. / Rasmussen, Kim J. R.	System reliabilities in steel structural frame design by inelastic analysis	341-348
Cai, Yancheng / Young, Ben	Transient state tests of cold-formed stainless steel single shear bolted connections	1-9

Author(s)

Title

Page(s)

Riera, Jorge Daniel / Miguel, Letícia Fleck Fadel / Iturrioz, Ignacio

Assessment of Brazilian tensile test by means of the truss-like Discrete Element Method (DEM) with imperfect mesh

10-21

Lam, H. F. / Hu, Q. / Wong, M. T.

The Bayesian methodology for the detection of railway ballast damage under a concrete sleeper

289-301

Lin, Zhaofei / Liu, Yuqing / He, Jun

Behavior of stud connectors under combined shear and tension loads

362-376

LeBorgne, M. R. / Ghannoum, W. M.

Calibrated analytical element for lateral-strength degradation of reinforced concrete columns

35-48

Conceição, José / Faria, Rui / Azenha, Miguel / Mamede, Flávio / Souza, Flávio

Early-age behaviour of the concrete surrounding a turbine spiral case: Monitoring and thermo-mechanical modelling

327-340

Hu, Y. / Baniotopoulos, C. / Yang, J.

Effect of internal stiffening rings and wall thickness on the structural response of steel wind turbine towers

148-161

Roh, Hwasung / Ou, Yu-Chen / Kim, Jinkyu / Kim, WooSeok

Effect of yielding level and post-yielding stiffness ratio of ED bars on seismic performance of PT rocking bridge piers

454-463

Ogueta-Gutiérrez, M. / Franchini, S. / Alonso, G.

Effects of bird protection barriers on the aerodynamic and aeroelastic behaviour of high speed train bridges

22-34

Shafaei, Jalil / Zareian, Mohammad Sajjad / Hosseini, Abdollah / Marefat, Mohammad Sadegh

Effects of joint flexibility on lateral response of reinforced concrete frames

412-431

Nandan, Harsh / Singh, Mahendra P.

Effects of thermal environment on structural frequencies: Part I – A simulation study

480-490

Nandan, Harsh / Singh, Mahendra P.

Effects of thermal environment on structural frequencies: Part II – A system identification model

491-498

Khampanit, Amnart / Leelataviwat, Sutat / Kochanin, Jensak / Warnitchai, Pennung

Energy-based seismic strengthening design of non-ductile reinforced concrete frames using buckling-restrained braces

110-122

Gong, Kuangmin / Ding, Jie / Chen, Xinzhong

Estimation of long-term extreme response of operational and parked wind turbines: Validation and some new insights

135-147

Vessby, Johan / Källsner, Bo / Olsson, Anders / Girhammar, Ulf Arne

Evaluation of softening behaviour of timber light-frame walls subjected to in-plane forces using simple FE models

464-479

Moreira, Susana / Ramos, Luís F. / Oliveira, Daniel V. / Lourenço, Paulo B.

Experimental behavior of masonry wall-to-timber elements connections strengthened with injection anchors

98-109

D'Amico, B. / Kermani, A. / Zhang, H.

Form finding and structural analysis of actively bent timber grid shells

195-207

Malekjafarian, A. / OBrien, E. J.

Identification of bridge mode shapes using Short Time Frequency Domain Decomposition of the responses measured in a passing vehicle

386-397

Yu, Jiayong / Meng, Xiaolin / Shao, Xudong / Yan, Banfu / Yang, Lei

Identification of dynamic displacements and modal frequencies of a medium-span suspension bridge using multimode GNSS processing

432-443

Song, Ruiqiang / Li, Yue / van de Lindt, John W.

Impact of earthquake ground motion characteristics on collapse risk of post-mainshock buildings considering aftershocks

349-361

Abidelah, Anis / Bouchaïr, Abdelhamid / Kerdal, Djamel Elddine

Influence of the flexural rigidity of the bolt on the behavior of the T-stub steel connection

181-194

Curadelli, O. / Amani, M.

Integrated structure-passive control design of linear structures under seismic excitations

256-264

Ed-dinari, Aberrahmane / Mottaqui, Hicham / Braikat, Bouazza / Jamal, Mohammad / Mohri, Foudil / Damil, Noureddine

Large torsion analysis of thin-walled open sections beams by the Asymptotic Numerical Method

240-255

Ibrahim, Sherif A.

Lateral torsional buckling strength of unsymmetrical plate girders with corrugated webs

123-134

Dias-Da-Costa, D. / Carmo, R. N. F. / Graça-e-Costa, R. / Valença, J. / Alfaiate, J.

Longitudinal reinforcement ratio in lightweight aggregate concrete beams

219-229

Xu, Qingfeng / Harries, Kent / Li, Xiangmin / Liu, Qiong / Gottron, Jennifer

Mechanical properties of structural bamboo following immersion in water

230-239

Pagani, Roberto / Bocciarelli, Massimiliano / Carvelli, Valter / Pisani, Marco Andrea

Modelling high temperature effects on bridge slabs reinforced with GFRP rebars

318-326

Shin, Jinwon / Whittaker, Andrew S. / Cormie, David / Wilkinson, Will

Numerical modeling of close-in detonations of high explosives

88-97

Viet, L. D. / Nghi, N. B.

On a nonlinear single-mass two-frequency pendulum tuned mass damper to reduce horizontal vibration

175-180

Kozmar, Hrvoje / Procino, Lorenzo / Borsani, Alessandra / Bartoli, Gianni

Optimizing height and porosity of roadway wind barriers for viaducts and bridges

49-61

Zheng, Jian-Jun / Dai, Jian-Guo

Prediction of the nonlinear pull-out response of FRP ground anchors using an analytical transfer matrix method

377-385

Mahdavipour, M. A. / Deylami, A.

Probabilistic assessment of strain hardening ratio effect on residual deformation demands of Buckling-Restrained Braced Frames

302-308

Moharrami, M. / Tootkaboni, M.

Reducing response of offshore platforms to wave loads using hydrodynamic buoyant mass dampers

162-174

Azinović, Boris / Koren, David / Kilar, Vojko

The seismic response of low-energy buildings founded on a thermal insulation layer – A parametric study

398-411

Shafaei, Jalil / Hosseini, Abdollah / Marefat, Mohammad Sadegh

Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles

265-288

Colajanni, Piero / La Mendola, Lidia / Mancini, Giuseppe / Recupero, Antonino / Spinella, Nino

Shear capacity in concrete beams reinforced by stirrups with two different inclinations

444-453

Breveglieri, Matteo / Aprile, Alessandra / Barros, Joaquim A. O.

Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars

76-87

Thenozhi, Suresh / Yu, Wen

Stability analysis of active vibration control of building structures using PD/PID control

208-218

Bednarz, Łukasz J. / Jasienko, Jerzy / Rutkowski, Marcin / Nowak, Tomasz P.

Strengthening and long-term monitoring of the structure of an historical church presbytery

62-75

Terán-Guillén, J. / Cicero, S. / Garcia, T. / Alvarez, J. A. / Martínez-Madrid, M. / Pérez-Quiroz, J. T.

Structural integrity assessment of the cast steel upper anchorage elements used in a cable stayed bridge

309-317

Zhang, Hao / Ellingwood, Bruce R. / Rasmussen, Kim J. R.

System reliabilities in steel structural frame design by inelastic analysis

341-348

Cai, Yancheng / Young, Ben

Transient state tests of cold-formed stainless steel single shear bolted connections

1-9

Advertisement

Engineering Structures - December 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - December 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.