Engineering Structures - September 2017

Published:	September 2017

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Dahai / Chen, Xinzhong / Xu, Kang	Analysis of buffeting response of hinged overhead transmission conductor to nonstationary winds	567-582
Dang, Canh N. / Hale, W. Micah / Martí-Vargas, J. R.	Assessment of transmission length of prestressing strands according to fib Model Code 2010	425-433
Khan, M. / Uy, B. / Tao, Z. / Mashiri, F.	Behaviour and design of short high-strength steel welded box and concrete-filled tube (CFT) sections	458-472
Abdulridha, Alaa / Palermo, Dan	Behaviour and modelling of hybrid SMA-steel reinforced concrete slender shear wall	77-89
Patel, Vipulkumar Ishvarbhai / Hassanein, M. F. / Thai, Huu-Tai / Abadi, Haider Al / Paton-Cole, Vidal	Behaviour of axially loaded circular concrete-filled bimetallic stainless-carbon steel tubular short columns	583-597
Wang, Weiqiang / Sheikh, M. Neaz / Hadi, Muhammad N. S. / Gao, Danying / Chen, Gang	Behaviour of concrete-encased concrete-filled FRP tube (CCFT) columns under axial compression	256-268
Tekle, Biruk Hailu / Khennane, Amar / Kayali, Obada	Bond of spliced GFRP reinforcement bars in alkali activated cement concrete	740-751
Caro, Manjola / Jemaa, Yaser / Dirar, Samir / Quinn, Andrew	Bond performance of deep embedment FRP bars epoxy-bonded into concrete	448-457
Al-Sibahy, Adnan / Edwards, Rodger	Characterization of the clay masonry units and construction technique at the ancient city of Nippur	517-529
Afshar, R. / van Dijk, N. P. / Bjurhager, I. / Gamstedt, E. K.	Comparison of experimental testing and finite element modelling of a replica of a section of the Vasa warship to identify the behaviour of structural joints	62-76
Kim, Sang-Hyo / Kim, Kun-Soo / Park, Sejun / Jung, Chi-Young / Choi, Jae-Gu	Comparison of hysteretic performance of stubby Y-type perfobond rib and stud shear connectors	114-124
Ni, Pengpeng / Mangalathu, Sujith / Mei, Guoxiong / Zhao, Yanlin	Compressive and flexural behaviour of reinforced concrete permeable piles	316-327
Wattick, John Andrew / Chen, An	Development of a prototype fiber Reinforced Polymer – Concrete Filled wall panel	297-308
Ozbakkaloglu, Togay / Saatcioglu, Murat	Displacement-based model to predict lateral drift capacities of concrete-filled FRP tube columns	345-355
Lou, Tiejiong / Lopes, Sergio M. R. / Lopes, Adelino V.	Effect of linear transformation on nonlinear behavior of continuous prestressed beams with external FRP cables	410-424
Yuan, Fang / Wu, Yu-Fei	Effect of load cycling on plastic hinge length in RC columns	90-102
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Elastic analysis of composite beams and beams retrofitted with FRP laminates with generalized end conditions	309-315
de Souza, Patricia T. / Kataoka, Marcela N. / El Debs, Ana Lúcia H. C.	Experimental and numerical analysis of the push-out test on shear studs in hollow core slabs	398-409
Bolis, Valentino / Preti, Marco / Marini, Alessandra / Giuriani, Ezio	Experimental cyclic and dynamic in-plane rocking response of a masonry transverse arch typical of historical churches	285-296
Nilforoush, Rasoul / Nilsson, Martin / Elfgren, Lennart	Experimental evaluation of tensile behaviour of single cast-in-place anchor bolts in plain and steel fibre-reinforced normal- and high-strength concrete	195-206
Gattesco, Natalino / Gubana, Alessandra / Buttazzi, Manuela / Melotto, Massimo	Experimental investigation on the behavior of glued-in rod joints in timber beams subjected to monotonic and cyclic loading	372-384
Chen, Zhihua / Liu, Jiadi / Yu, Yujie	Experimental study on interior connections in modular steel buildings	625-638
Tzimas, A. S. / Karavasilis, T. L. / Bazeos, N. / Beskos, D. E.	Extension of the hybrid force/displacement (HFD) seismic design method to 3D steel moment-resisting frame buildings	486-504
Behnam, Hamdolah / Kuang, J. S. / Huang, Roy Y. C.	Exterior RC wide beam-column connections: Effect of beam width ratio on seismic behaviour	27-44
Yoo, Doo-Yeol / Yuan, Tianfeng / Yang, Jun-Mo / Yoon, Young-Soo	Feasibility of replacing minimum shear reinforcement with steel fibers for sustainable high-strength concrete beams	207-222
Alkhalil, Jwan / El-Maaddawy, Tamer	Finite element modelling and testing of two-span concrete slab strips strengthened by externally-bonded composites and mechanical anchors	45-61
Paraskevoulakos, C. / Tanner, D. W. J. / Scott, T. B.	Finite element modelling approach to investigate the degradation of intermediate level waste drums induced from interior metallic corrosion	385-397
Rasheed, Hayder A. / Abdalla, Jamal / Hawileh, Rami / Al-Tamimi, Adil K.	Flexural behavior of reinforced concrete beams strengthened with externally bonded Aluminum Alloy plates	473-485
Huang, Xiaogang / Zhou, Zhen / Xie, Qin / Xue, Rongle / Zhu, Dongping	Force distribution analysis of self-centering coupled-beams for moment-resisting-frames without floor elongation	328-344
Tahershamsi, M. / Fernandez, I. / Zandi, K. / Lundgren, K.	Four levels to assess anchorage capacity of corroded reinforcement in concrete	434-447
Dal Lago, Bruno / Biondini, Fabio / Toniolo, Giandomenico	Friction-based dissipative devices for precast concrete panels	356-371
Feng, Liuyang / Qian, Xudong	A hot-spot energy indicator for welded plate connections under cyclic axial loading and bending	598-612
Seifi, Ali / Hosseini, Abdollah / Marefat, Mohammad Sadegh / Zareian, Mohammad Sajjad	Improving seismic performance of old-type RC frames using NSM technique and FRP jackets	705-723
Wilches Están, José de Jesús / Santa María, Hernán / Riddell, Rafael / Arrate, Carlos	Influence of the use of external shear keys on the seismic behavior of Chilean highway bridges	613-624
Xu, Yan / Brownjohn, James Mark William / Hester, David / Koo, Ki Young	Long-span bridges: Enhanced data fusion of GPS displacement and deck accelerations	639-651
Fenerci, Aksel / Øiseth, Ole / Rønnquist, Anders	Long-term monitoring of wind field characteristics and dynamic response of a long-span suspension bridge in complex terrain	269-284
Saykin, Vitaliy V. / Nguyen, Tam H. / Hajjar, Jerome F. / Deniz, Derya / Song, Junho	Material characterization using finite element deletion strategies for collapse modeling of steel structures	125-133
Bonessio, Noemi / Benzoni, Gianmario / Lomiento, Giuseppe	A multi-mode approach for multi-directional damage detection in frame structures	505-516
Lee, Tzu-Ying / Chung, Kun-Jun / Chang, Hao	A new implicit dynamic finite element analysis procedure with damping included	530-544
Guo, Yan-Lin / Zhu, Jing-Shen / Zhou, Peng / Zhu, Bo-Li	A new shuttle-shaped buckling-restrained brace. Theoretical study on buckling behavior and load resistance	223-241
Lemes, Ígor J. M. / Silveira, Ricardo A. M. / Silva, Andréa R. D. / Rocha, Paulo A. S.	Nonlinear analysis of two-dimensional steel, reinforced concrete and composite steel-concrete structures via coupling SCM/RPHM	12-26
Feng, Peng / Qiang, Hanlin / Qin, Weihong / Gao, Meng	A novel kinked rebar configuration for simultaneously improving the seismic performance and progressive collapse resistance of RC frame structures	752-767
Amezquita-Sanchez, Juan P. / Seon Park, Hyo / Adeli, Hojjat	A novel methodology for modal parameters identification of large smart structures using MUSIC, empirical wavelet transform, and Hilbert transform	148-159
Xu, Leige / Lin, Mian	On the critical axial forces of upheaval buckling for imperfect submarine pipelines	692-704
Alam, Md Iftekharul / Fawzia, Sabrina / Zhao, Xiao-Ling / Remennikov, Alex M. / Bambach, M. R. / Elchalakani, M.	Performance and dynamic behaviour of FRP strengthened CFST members subjected to lateral impact	160-176
Ibrahim, Omar A. / Lignos, Dimitrios G. / Rogers, Colin A.	A probabilistic approach for assessing discontinuities in structural steel components based on Charpy-V-notch tests	1-11
Ding, Yang / Song, Xiaoran / Zhu, Hai-Tao	Probabilistic progressive collapse analysis of steel frame structures against blast loads	679-691
Sagaseta, J. / Olmati, P. / Micallef, K. / Cormie, D.	Punching shear failure in blast-loaded RC slabs and panels	177-194
Hu, Biao / Wu, Yu-Fei	Quantification of shear cracking in reinforced concrete beams	666-678
Sauder, Heather Scot / Sarkar, Partha P.	Real-time prediction of aeroelastic loads of wind turbine blades in gusty and turbulent wind using an improved load model	103-113
Zhu, Haiqing / Li, Ying / Zhang, Xiedong	Rigidity estimation of embedded CFST column-to-beam connections	768-781
Aminbaghai, Mehdi / Murin, Justin / Balduzzi, Giuseppe / Hrabovsky, Juraj / Hochreiner, Georg / Mang, Herbert A.	Second-order torsional warping theory considering the secondary torsion-moment deformation-effect	724-739
Nuzzo, Iolanda / Caterino, Nicola / Maddaloni, Giuseppe / Occhiuzzi, Antonio	Smart hybrid isolation of a case study highway bridge exploiting seismic early warning information	134-147
Bruno, Luca / Corbetta, Alessandro	Uncertainties in crowd dynamic loading of footbridges: A novel multi-scale model of pedestrian traffic	545-566
Dai, Kaoshan / Wang, Jianze / Li, Bowei / Hong, H. P.	Use of residual drift for post-earthquake damage assessment of RC buildings	242-255
Zhang, Sigong / Xu, Lei / Qin, Jingwei	Vibration of lightweight steel floor systems with occupants: Modelling, formulation and dynamic properties	652-665

About this
data sheet
IssueID
17384
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - September 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - September 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.