Construction and Building Materials - June 2016

Published:	June 2016

Articles in this Issue

Author(s)	Title	Page(s)
Yoshitake, Isamu / Ueno, Sayaka / Ushio, Yuta / Arano, Hiroki / Fukumoto, Sunao	Abrasion and skid resistance of recyclable fly ash concrete pavement made with limestone aggregate	440-446
Ngo, Hai-Thong / Kadri, El-Hadj / Kaci, Abdelhak / Ngo, Tien-Tung / Trudel, Alain / Lecrux, Sylvie	Advanced online water content measurement for self-compacting concrete production in ready-mixed concrete plants	570-580
Chabriac, P. A. / Gourdon, E. / Gle, P. / Fabbri, A. / Lenormand, H.	Agricultural by-products for building insulation: Acoustical characterization and modeling to predict micro-structural parameters	158-167
Liu, Yiquan / Zhu, Weiping / Yang, En-Hua	Alkali-activated ground granulated blast-furnace slag incorporating incinerator fly ash as a potential binder	1005-1012
Singh, M. / Vinodh Kumar, S. / Waghmare, Sujata A. / Sabale, P. D.	Aragonite–vaterite–calcite: Polymorphs of CaCO 3 in 7th century CE lime plasters of Alampur group of temples, India	386-397
Karim, Hogr / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Axial load-axial deformation behaviour of circular concrete columns reinforced with GFRP bars and helices	1147-1157
Ballard, Z. C. / Thrall, A. P. / Smith, B. J.	Behavior of folding sandwich panel structures: Impact of ground conditions, anchorage, and panel warping	1110-1122
Domski, Jacek	A blurred border between ordinary concrete and SFRC	247-252
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Bond properties of lightweight concrete – A review	478-496
Bae, Baek-Il / Choi, Hyun-Ki / Choi, Chang-Sik	Bond stress between conventional reinforcement and steel fibre reinforced reactive powder concrete	825-835
Zhou, Jian / Ye, Guang / Van Breugel, Klaas	Cement hydration and microstructure in concrete repairs with cementitious repair materials	765-772
Ye, Hailong / Jin, Xianyu / Fu, Chuanqing / Jin, Nanguo / Xu, Yibin / Huang, Tao	Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation	457-463
Marastoni, Diego / Pelà, Luca / Benedetti, Andrea / Roca, Pere	Combining Brazilian tests on masonry cores and double punch tests for the mechanical characterization of historical mortars	112-127
Lastra-González, Pedro / Calzada-Perez, Miguel A. / Castro-Fresno, Daniel / Vega-Zamanillo, Angel / Indacoechea-Vega, Irune	Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste	1133-1140
Maharaj, Davatee / Mwasha, Abrahams	Comparative analysis of the transmission factors of lead and concrete manufactured with electric arc furnace slag aggregates	1141-1146
Chen, Jiaxin / Chouw, Nawawi	Compressive behaviour of flax FRP double tube confined coconut fibre reinforced concrete	666-673
Sun, Hongfang / Wei, Liangliang / Zhu, Miaochang / Han, Ningxu / Zhu, Ji-Hua / Xing, Feng	Corrosion behavior of carbon fiber reinforced polymer anode in simulated impressed current cathodic protection system with 3% NaCl solution	538-546
López-Montero, Teresa / Miró, Rodrigo	Differences in cracking resistance of asphalt mixtures due to ageing and moisture damage	299-306
Alhussainy, Faez / Hasan, Hayder Alaa / Rogic, Sime / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Direct tensile testing of Self-Compacting Concrete	903-906
Song, Zijian / Jiang, Linhua / Zhang, Ziming / Xiong, Chuansheng	Distance-associated chloride binding capacity of cement paste subjected to natural diffusion	925-932
Flores-Colen, I. / Silva, L. / de Brito, J. / de Freitas, V. P.	Drying index for in-service physical performance assessment of renders	1101-1109
Jia, Liang-Jiu / Ikai, Toyoki / Shinohara, Kazuki / Ge, Hanbin	Ductile crack initiation and propagation of structural steels under cyclic combined shear and normal stress loading	69-83
Tafraoui, Ahmed / Escadeillas, Gilles / Vidal, Thierry	Durability of the Ultra High Performances Concrete containing metakaolin	980-987
Yan, Libo / Chouw, Nawawi / Huang, Liang / Kasal, Bohumil	Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites	168-182
Amini, Kamran / Mehdipour, Iman / Hwang, Soo Duck / Shekarchi, Mohammad	Effect of binder composition on time-dependent stability and robustness characteristics of self-consolidating mortar subjected to prolonged agitation	654-665
Bourdot, Alexandra / Thiéry, Vincent / Bulteel, David / Hammerschlag, Jean-Gabriel	Effect of burnt oil shale on ASR expansions: A petrographic study of concretes based on reactive aggregates	556-569
Nasir, Muhammad / Baghabra Al-Amoudi, Omar S. / Al-Gahtani, Husain J. / Maslehuddin, Mohammed	Effect of casting temperature on strength and density of plain and blended cement concretes prepared and cured under hot weather conditions	529-537
Pehlivanlı, Zühtü Onur / Uzun, İbrahim / Yücel, Zeynep Pınar / Demir, İlhami	The effect of different fiber reinforcement on the thermal and mechanical properties of autoclaved aerated concrete	325-330
Noushini, Amin / Castel, Arnaud	The effect of heat-curing on transport properties of low-calcium fly ash-based geopolymer concrete	464-477
Remzova, Monika / Sasek, Petr / Frankeová, Dita / Slížková, Zuzana / Rathousky, Jiri	Effect of modified ethylsilicate consolidants on the mechanical properties of sandstone	674-681
Hasdemir, S. / Tuğrul, A. / Yilmaz, M.	The effect of natural sand composition on concrete strength	940-948
Abutaha, Fuad / Razak, Hashim Abdul / Kanadasan, Jegathish	Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete	416-423
Sinaie, S. / Heidarpour, A. / Zhao, X. L.	Effect of pre-induced cyclic damage on the mechanical properties of concrete exposed to elevated temperatures	867-876
Bal, Bekir Cihad	The effect of span-to-depth ratio on the impact bending strength of poplar LVL	355-359
Doğan, Murat / Bideci, Alper	Effect of Styrene Butadiene Copolymer (SBR) admixture on high strength concrete	378-385
Alizadeh, Mehdi / Momeni, Mahboubeh	The effect of the scrap/DRI ratio on the specification of the EAF dust and its influence on mechanical properties of the concrete treated by its dust	1041-1045
Wei, Yu-Ling / Cheng, Shao-Hsian / Ko, Guan-Wei	Effect of waste glass addition on lightweight aggregates prepared from F-class coal fly ash	773-782
Pozo-Antonio, J. S. / Ramil, A. / Rivas, T. / López, A. J. / Fiorucci, M. P.	Effectiveness of chemical, mechanical and laser cleaning methods of sulphated black crusts developed on granite	682-690
Naamane, Sara / Rais, Zakia / Taleb, Mustapha	The effectiveness of the incineration of sewage sludge on the evolution of physicochemical and mechanical properties of Portland cement	783-789
Sayadi, Ali A. / Tapia, Juan V. / Neitzert, Thomas R. / Clifton, G. Charles	Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete	716-724
Mehdi Mirzazadeh, M. / Noël, Martin / Green, Mark F.	Effects of low temperature on the static behaviour of reinforced concrete beams with temperature differentials	191-201
Ergün, Ali / Kürklü, Gökhan / Serhat Baspinar, M.	The effects of material properties on bond strength between reinforcing bar and concrete exposed to high temperature	691-698
Shi, Chen / Zhang, Ge / He, Tingshu / Li, Yimin	Effects of superplasticizers on the stability and morphology of ettringite	261-266
Johnson, Robert / Shehata, Medhat H.	The efficacy of accelerated test methods to evaluate Alkali Silica Reactivity of Recycled Concrete Aggregates	518-528
Abdullah, Mohd Ezree / Zamhari, Kemas Ahmad / Hainin, Mohd Rosli / Oluwasola, Ebenezer Akin / Hassan, Norhidayah Abdul / Yusoff, Nur Izzi Md.	Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives	232-240
Shoukry, H. / Kotkata, M. F. / Abo-El-Enein, S. A. / Morsy, M. S. / Shebl, S. S.	Enhanced physical, mechanical and microstructural properties of lightweight vermiculite cement composites modified with nano metakaolin	276-283
Yang, Haifeng / Lan, Wenwu / Qin, Yinghong / Wang, Jiang	Evaluation of bond performance between deformed bars and recycled aggregate concrete after high temperatures exposure	885-891
Wang, Bing / Xu, Shilang / Liu, Fei	Evaluation of tensile bonding strength between UHTCC repair materials and concrete substrate	595-606
Al-Bayati, Hanaa Khaleel Alwan / Das, Prabir Kumar / Tighe, Susan L. / Baaj, Hassan	Evaluation of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate	284-298
Hou, Dongshuai / Yan, Handong / Zhang, Jinrui / Wang, Penggang / Li, Zongjin	Experimental and computational investigation of magnesium phosphate cement mortar	331-342
Deneele, Dimitri / Le Runigo, Barbara / Cui, Yu-Jun / Cuisinier, Olivier / Ferber, Valéry	Experimental assessment regarding leaching of lime-treated silt	1032-1040
Sarti, Francesco / Palermo, Alessandro / Pampanin, Stefano	Experimental calibration of parallel-to-grain strain penetration length for internal epoxied bars	970-979
Oztekin, Ertekin / Pul, Selim / Husem, Metin	Experimental determination of Drucker-Prager yield criterion parameters for normal and high strength concretes under triaxial compression	725-732
Han, Qinghua / Wang, Lichen / Xu, Jie	Experimental research on fracture behaviors of damaged CFRP tendons: Fracture mode and failure analysis	1013-1024
Toufigh, Vahab / Hosseinali, Massoud / Shirkhorshidi, Seyed Masoud	Experimental study and constitutive modeling of polymer concrete's behavior in compression	183-190
Navarro-Gregori, Juan / Mezquida-Alcaraz, Eduardo J. / Serna-Ros, Pedro / Echegaray-Oviedo, Javier	Experimental study on the steel-fibre contribution to concrete shear behaviour	100-111
Li, Ye / Cheng, Xudong / Cao, Wei / Gong, Lunlun / Zhang, Ruifang / Zhang, Heping	Fabrication of adiabatic foam by sodium silicate with glass fiber as supporting body	933-939
Couvidat, Julien / Benzaazoua, Mostafa / Chatain, Vincent / Bouamrane, Ahmed / Bouzahzah, Hassan	Feasibility of the reuse of total and processed contaminated marine sediments as fine aggregates in cemented mortars	892-902
Chen, Chunchao / Qiu, Hongxing / Lu, Yong	Flexural behaviour of timber dovetail mortise–tenon joints	366-377
Nadir, Yashida / Nagarajan, Praveen / Ameen, Mohammed / Arif M, Muhammed	Flexural stiffness and strength enhancement of horizontally glued laminated wood beams with GFRP and CFRP composite sheets	547-555
Xu, Ouming / Xiao, Feipeng / Han, Sen / Amirkhanian, Serji N. / Wang, Zhenjun	High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers	49-58
Ranjbar, Navid / Mehrali, Mehdi / Mehrali, Mohammad / Alengaram, U. Johnson / Jumaat, Mohd Zamin	High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber	629-638
Shiotani, Tomoki / Kobayashi, Yoshikazu / Chang, Kai-Chun	Hybrid elastic-wave CT with impact acoustics for single-side measurement in concrete structures	907-914
Heikal, Mohamed / Ibrahim, N. S.	Hydration, microstructure and phase composition of composite cements containing nano-clay	19-27
Tang, Fujian / Bao, Yi / Chen, Yizheng / Tang, Yan / Chen, Genda	Impact and corrosion resistances of duplex epoxy/enamel coated plates	7-18
Chindaprasirt, Prinya / Rattanasak, Ubolluk	Improvement of durability of cement pipe with high calcium fly ash geopolymer covering	956-961
Chen, Zhitao / Liu, Yiquan / Zhu, Weiping / Yang, En-Hua	Incinerator bottom ash (IBA) aerated geopolymer	1025-1031
Junes, A. / Si Larbi, A.	An indirect non-linear approach for the analysis of sandwich panels with TRC facings	406-415
Diquélou, Youen / Gourlay, Etienne / Arnaud, Laurent / Kurek, Bernard	Influence of binder characteristics on the setting and hardening of hemp lightweight concrete	506-517
Wang, Hao / Wang, Licheng / Song, Yupu / Wang, Jizhong	Influence of free water on dynamic behavior of dam concrete under biaxial compression	222-231
Xiaowei, Zhang / Chunxia, Lu / Junyi, Shen	Influence of tartaric acid on early hydration and mortar performance of Portland cement-calcium aluminate cement-anhydrite binder	877-884
Vaitkus, Audrius / Čygas, Donatas / Laurinavičius, Alfredas / Vorobjovas, Viktoras / Perveneckas, Zigmantas	Influence of warm mix asphalt technology on asphalt physical and mechanical properties	800-806
Foti, Dora	Innovative techniques for concrete reinforcement with polymers	202-209
Siddiqui, Md Sarwar / Grasley, Zachary / Fowler, David W.	Internal water pressure development in saturated concrete cylinder subjected to coefficient of thermal expansion tests: Poroelastic model	996-1004
Kamali, Mahsa / Ghahremaninezhad, Ali	An investigation into the hydration and microstructure of cement pastes modified with glass powders	915-924
Assi, Lateef N. / Deaver, Edward (Eddie) / ElBatanouny, Mohamed K. / Ziehl, Paul	Investigation of early compressive strength of fly ash-based geopolymer concrete	807-815
Jeoffroy, Etienne / Koulialias, Dimitrios / Yoon, Songhak / Partl, Manfred N. / Studart, André R.	Iron oxide nanoparticles for magnetically-triggered healing of bituminous materials	497-505
Shahverdi, Moslem / Czaderski, Christoph / Motavalli, Masoud	Iron-based shape memory alloys for prestressed near-surface mounted strengthening of reinforced concrete beams	28-38
Ismail, Mohammad / Yew, Chan Kee / Muhammad, Bala	Life-span prediction of abandoned reinforced concrete residential buildings	1059-1065
Wu, Xiaoyu / Wang, Shifeng / Dong, Ruikun	Lightly pyrolyzed tire rubber used as potential asphalt alternative	623-628
Borosnyói, Adorján	Long term durability performance and mechanical properties of high performance concretes with combined use of supplementary cementing materials	307-324
Ng Puga, Ka Lai N. / Williams, R. Christopher	Low temperature performance of laboratory produced asphalt rubber (AR) mixes containing polyoctenamer	1046-1053
Figueiredo, António / Lapa, José / Vicente, Romeu / Cardoso, Claudino	Mechanical and thermal characterization of concrete with incorporation of microencapsulated PCM for applications in thermally activated slabs	639-647
Beltrán, Manuel G. / Barbudo, Auxi / Agrela, Francisco / Jiménez, José Ramón / de Brito, Jorge	Mechanical performance of bedding mortars made with olive biomass bottom ash	699-707
Pineaud, A. / Pimienta, P. / Rémond, S. / Carré, H.	Mechanical properties of high performance self-compacting concretes at room and high temperature	747-755
Sang, Guochen / Zhu, Yiyun / Yang, Gang	Mechanical properties of high porosity cement-based foam materials modified by EVA	648-653
Choi, Seongcheol / Na, Byung-Uk / Won, Moon C.	Mesoscale analysis of continuously reinforced concrete pavement behavior subjected to environmental loading	447-456
Mangat, P. S. / Grigoriadis, K. / Abubakri, S.	Microwave curing parameters of in-situ concrete repairs	856-866
Ordóñez, Salvador / La Iglesia, Ángel / Louis, Miguel / García-del-Cura, Ma Ángeles	Mineralogical evolution of salt over nine years, after removal of efflorescence and saline crusts from Elche's Old Bridge (Spain)	343-354
Fontes, Wanna Carvalho / Mendes, Julia Castro / Da Silva, Sidney Nicodemos / Fiorotti Peixoto, Ricardo André	Mortars for laying and coating produced with iron ore tailings from tailing dams	988-995
Auclair, Samuel C. / Sorelli, Luca / Salenikovich, Alexander	A new composite connector for timber-concrete composite structures	84-92
Lin, Shibin / Ashlock, Jeramy C. / Williams, R. Christopher	Nondestructive quality assessment of asphalt pavements based on dynamic modulus	836-847
Cai, Dong-sheng / Xu, Zhao-hui / Yin, Jie / Liu, Rong-gui / Liang, Ge	A numerical investigation on the performance of composite anchors for CFRP tendons	848-855
Huang, Xiaoyan / Wang, Zhongjie / Liu, Ying / Hu, Wentao / Ni, Wen	On the use of blast furnace slag and steel slag in the preparation of green artificial reef concrete	241-246
Noorsuhada, M. N.	An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission technique	424-439
Soive, Anthony / Roziere, Emmanuel / Loukili, Ahmed	Parametrical study of the cementitious materials degradation under external sulfate attack through numerical modeling	267-275
Fares, Galal / Al-Zaid, Rajeh Z. / Fauzi, Amir / Alhozaimy, Abdulrahman M. / Al-Negheimish, Abdulaziz I. / Khan, M. Iqbal	Performance of optimized electric arc furnace dust-based cementitious matrix compared to conventional supplementary cementitious materials	210-221
Dinis-Almeida, Marisa / Castro-Gomes, João / Sangiorgi, Cesare / Zoorob, Salah E. / Afonso, Márcia Lopes	Performance of Warm Mix Recycled Asphalt containing up to 100% RAP	1-6
Zhu, Mengguang / Ji, Ru / Li, Zhongmin / Wang, Hao / Liu, Lili / Zhang, Zuotai	Preparation of glass ceramic foams for thermal insulation applications from coal fly ash and waste glass	398-405
Fan, Cheng-Chih / Huang, Ran / Hwang, Howard / Chao, Sao-Jeng	Properties of concrete incorporating fine recycled aggregates from crushed concrete wastes	708-715
Bu, Yuhuan / Du, Jiapei / Guo, Shenglai / Liu, Huajie / Huang, Chenxing	Properties of oil well cement with high dosage of metakaolin	39-48
Hunag, Li-Jeng / Wang, Her-Yung / Wu, Yu-Wu	Properties of the mechanical in controlled low-strength rubber lightweight aggregate concrete (CLSRLC)	1054-1058
Wawrzeńczyk, Jerzy / Kozak, Wioletta	Protected Paste Volume (PPV) as a parameter linking the air-pore structure in concrete with the frost resistance results	360-365
Alberti, M. G. / Enfedaque, A. / Gálvez, J. C. / Ferreras, A.	Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixes	607-622
Magnoni, Marco / Toraldo, Emanuele / Giustozzi, Filippo / Crispino, Maurizio	Recycling practices for airport pavement construction: Valorisation of on-site materials	59-68
Secrieru, Egor / Mechtcherine, Viktor / Schröfl, Christof / Borin, Dmitry	Rheological characterisation and prediction of pumpability of strain-hardening cement-based-composites (SHCC) with and without addition of superabsorbent polymers (SAP) at various temperatures	581-594
González, Emma / Costa, Liliana M. B. / Silva, Hugo M. R. D. / Hilliou, Loic	Rheological characterization of EVA and HDPE polymer modified bitumens under large deformation at 20 °C	756-764
Podolsky, Joseph Herbert / Buss, Ashley / Williams, R. Christopher / Cochran, Eric W.	The rutting and stripping resistance of warm and hot mix asphalt using bio-additives	128-139
Witzany, Jiří / Zigler, Radek / Kroftová, Klára	Strengthening of compressed brick masonry walls with carbon composites	1066-1079
Zeng, X. H. / Xie, Y. J. / Deng, D. H. / Wang, P. / Qu, F. L.	A study of the dynamic mechanical properties of CRTS I type CA mortar	93-99
Wang, Wei-Chien / Chen, Bo-Tsun / Wang, Her-Yung / Chou, Hsien-Chih	A study of the engineering properties of alkali-activated waste glass material (AAWGM)	962-969
Pakravan, Hamid Reza / Jamshidi, Masoud / Latifi, Masoud	Study on fiber hybridization effect of engineered cementitious composites with low- and high-modulus polymeric fibers	739-746
Xia, Lei / Cao, Dongwei / Zhang, Haiyan / Guo, Yansheng	Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt	949-955
Liu, Huajie / Bu, Yuhuan / Sanjayan, Jay G. / Nazari, Ali / Shen, Zhonghou	Suitability of polyacrylamide superabsorbent polymers as the internal curing agent of well cement	253-260
Xiao, Feipeng / Hou, Xiangdao / Amirkhanian, Serji / Kim, Kwang W.	Superpave evaluation of higher RAP contents using WMA technologies	1080-1087
Grover, David / Savidge, Cabot R. / Townsend, Laura / Rosario, Odanis / Hu, Liang-Bo / Rizzo, Donna M. / Dewoolkar, Mandar M.	Surface permeability of natural and engineered porous building materials	1088-1100
Muhammad, Nasiru Zakari / Shafaghat, Arezou / Keyvanfar, Ali / Abd. Majid, Muhd Zaimi / Ghoshal, S. K. / Mohammadyan Yasouj, Seyed Esmaeil / Ganiyu, Abideen Adekunle / Samadi Kouchaksaraei, Mostafa / Kamyab, Hesam / Taheri, Mohammad Mahdi / Rezazadeh Shirdar, Mostafa / McCaffer, Ronald	Tests and methods of evaluating the self-healing efficiency of concrete: A review	1123-1132
Sañudo, R. / dell'Olio, L. / Casado, J. A. / Carrascal, I. A. / Diego, S.	Track transitions in railways: A review	140-157
Wu, Jin / Li, Hongming / Wang, Zhe / Liu, Jingjing	Transport model of chloride ions in concrete under loads and drying-wetting cycles	733-738
Audo, Mariane / Mahieux, Pierre-Yves / Turcry, Philippe	Utilization of sludge from ready-mixed concrete plants as a substitute for limestone fillers	790-799
Colorado, Henry A. / Garcia, Edwin / Buchely, M. F.	White Ordinary Portland Cement blended with superfine steel dust with high zinc oxide contents	816-824

About this
data sheet
IssueID
22597
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - June 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - June 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.