Construction and Building Materials - October 2018

Published:	October 2018

Articles in this Issue

Author(s)	Title	Page(s)
Yuan, Fang / Chen, Mengcheng / Zhou, Fengliu / Yang, Chao	Behaviors of steel-reinforced ECC columns under eccentric compression	402-413
He, Minjuan / Sun, Xiaofeng / Li, Zheng	Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlock	175-183
Lv, Liangsheng / Yang, Haifeng / Zhang, Tianbao / Deng, Zhiheng	Bond behavior between recycled aggregate concrete and deformed bars under uniaxial lateral pressure	12-19
Manzur, Tanvir / Baten, Bayezid / Hasan, Md. Jihan / Akter, Halima / Tahsin, Adhora / Hossain, Khandaker M. A.	Corrosion behavior of concrete mixes with masonry chips as coarse aggregate	20-29
Chen, Heng / Feng, Pan / Ye, Shaoxiong / Sun, Wei	The coupling effect of calcium concentration and pH on early hydration of cement	391-401
Shang, J. / Yokota, Y. / Zhao, Z. / Dang, W.	DEM simulation of mortar-bolt interface behaviour subjected to shearing	120-137
Hajsadeghi, Mohammad / Chin, Chee Seong / Jones, Stephen W.	Development of a generic three-dimensional finite element fibre pullout model	354-368
Shadmani, Ali / Tahmouresi, Behzad / Saradar, Ashkan / Mohseni, Ehsan	Durability and microstructure properties of SBR-modified concrete containing recycled asphalt pavement	380-390
Hu, Zhao / Ding, Hao / Lai, Jinxing / Wang, Hao / Wang, Xiuling / He, Siyue	The durability of shotcrete in cold region tunnel: A review	670-683
Bicer, Kamil / Yalciner, Hakan / Pekrioglu Balkıs, Ayse / Kumbasaroglu, Atila	Effect of corrosion on flexural strength of reinforced concrete beams with polypropylene fibers	574-588
Zhong, Yanglong / Gao, Liang / Zhang, Yanrong	Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stage	638-647
Wang, Xin-Ling / Zhao, Geng-Qi / Li, Ke / Li, Miao-Hao-Fu	Effect of damage parameter variation on bond characteristics of CFRP-sheets bonded to concrete beams	184-192
Wu, Wenjuan / Wang, Ren / Zhu, Changqi / Meng, Qingshan	The effect of fly ash and silica fume on mechanical properties and durability of coral aggregate concrete	69-78
Wu, Guiyuan / Yan, Wen / Schafföner, Stefan / Lin, Xiaoli / Ma, Sanbao / Zhai, Yaojie / Liu, Xijun / Xu, Linlin	Effect of magnesium aluminate spinel content of porous aggregates on cement clinker corrosion and adherence properties of lightweight periclase-spinel refractories	102-109
Cihangir, Ferdi / Ercikdi, Bayram / Kesimal, Ayhan / Ocak, Sinan / Akyol, Yunus	Effect of sodium-silicate activated slag at different silicate modulus on the strength and microstructural properties of full and coarse sulphidic tailings paste backfill	555-566
Dabbebi, R. / Barroso de Aguiar, J. L. / Camões, A. / Samet, B. / Baklouti, S.	Effect of the calcinations temperatures of phosphate washing waste on the structural and mechanical properties of geopolymeric mortar	489-498
Wang, Yuanzhan / Wu, Linjian / Wang, Yuchi / Liu, Chenxi / Li, Qingmei	Effects of coarse aggregates on chloride diffusion coefficients of concrete and interfacial transition zone under experimental drying-wetting cycles	230-245
Boussaba, Lisa / Foufa, Amina / Makhlouf, Said / Lefebvre, Gilles / Royon, Laurent	Elaboration and properties of a composite bio-based PCM for an application in building envelopes	156-165
Cui, Xin-zhuang / Cui, She-qiang / Lu, Tu / Zhang, Lei / Wang, Yi-Lin / Li, Jun	Evaluation of the performance of sensor-enabled geobelts after cyclic loading	414-422
Pascual-Muñoz, P. / Indacoechea-Vega, I. / Zamora-Barraza, D. / Castro-Fresno, D.	Experimental analysis of enhanced cement-sand-based geothermal grouting materials	481-488
Ding, Xinxin / Li, Changyong / Li, Yizhuo / Lu, Yazhao / Song, Chao / Zhao, Shunbo	Experimental and numerical study on stress-strain behavior of self-compacting SFRC under uniaxial compression	30-38
Xu, Feng / Wang, Kai / Wang, Shuguang / Li, Weiwei / Liu, Weiqing / Du, DongSheng	Experimental bond behavior of deformed rebars in half-grouted sleeve connections with insufficient grouting defect	264-274
Li, Ting / Zhu, Hong / Wang, Qiang / Li, Jian / Wu, Tiange	Experimental study on the enhancement of additional ribs to the bond performance of FRP bars in concrete	545-554
Köfteci, Sevil / Nazary, Mansor	Experimental study on usability of various construction wastes as fine aggregate in asphalt mixture	369-379
Shao, Ning-ning / Zhang, Yan-bo / Liu, Ze / Wang, Dong-Min / Zhang, Zuo-tai	Fabrication of hollow microspheres filled fly ash based foam geopolymers with ultra-low thermal conductivity and relative high strength	567-573
Zahiri, Zohreh / Laefer, Debra F. / Gowen, Aoife	The feasibility of short-wave infrared spectrometry in assessing water-to-cement ratio and density of hardened concrete	661-669
Le, Duc-Hien / Sheen, Yeong-Nain / Lam, My Ngoc-Tra	Fresh and hardened properties of self-compacting concrete with sugarcane bagasse ash–slag blended cement	138-147
Peiris, A. / Harik, I.	FRP-steel bond study of IM and UHM CFRP strips	628-637
Lee, Seung Ho / Kim, Soonho / Yoo, Doo-Yeol	Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete	530-544
Ghorbani, Saeid / Taji, Iman / Tavakkolizadeh, Mohmmadreza / Davodi, Ali / de Brito, Jorge	Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement	110-119
Etman, Emad E. / Afefy, Hamdy M. / Baraghith, Ahmed T. / Khedr, Sara A.	Improving the shear performance of reinforced concrete beams made of recycled coarse aggregate	310-324
Pinho-Lopes, Margarida / de Lurdes Lopes, Maria	Influence of mechanical damage induced in laboratory on the soil-geosynthetic interaction in inclined-plane shear	468-480
Baloch, Waqas Latif / Khushnood, Rao Arsalan / Khaliq, Wasim	Influence of multi-walled carbon nanotubes on the residual performance of concrete exposed to high temperatures	44-56
Martinho, F. C. G. / Picado-Santos, L. G. / Capitão, S. D.	Influence of recycled concrete and steel slag aggregates on warm-mix asphalt properties	684-696
Hu, Miaomiao / Guo, Jintang / Xu, Yang / Fan, Jinjie / Cao, Lei / Wang, Meiyu / Feng, Yakai	Influence of triethanolamine on reactivity of hydrated matrix in sodium silicate self-healing system and the mechanism	445-452
Zhang, Zhao / Ye, Wei-min / Liu, Zhang-Rong / Chen, Bao / Cui, Yu-Jun	Influences of PSD curve and vibration on the packing dry density of crushed bentonite pellet mixtures	246-255
Combrinck, Riaan / Steyl, Lourens / Boshoff, William P.	Interaction between settlement and shrinkage cracking in plastic concrete	1-11
Feng, Hu / Sheikh, M. Neaz / Hadi, Muhammad N. S. / Feng, Lu / Gao, Danying / Zhao, Jun	Interface bond performance of steel fibre embedded in magnesium phosphate cementitious composite	648-660
Navikas, Deividas / Sivilevičius, Henrikas / Bulevičius, Matas	Investigation and evaluation of railway ballast properties variation during technological processes	325-337
Wang, Weibiao / Feng, Shan / Zhang, Yingbo	Investigation of interface between asphalt core and gravel transition zone in embankment dams	148-155
Bergamonti, L. / Taurino, R. / Cattani, L. / Ferretti, D. / Bondioli, F.	Lightweight hybrid organic-inorganic geopolymers obtained using polyurethane waste	285-292
Khan, Musaad Zaheer Nazir / Hao, Yifei / Hao, Hong / Shaikh, Faiz Uddin Ahmed / Liu, Kewei	Mechanical properties of ambient cured high-strength plain and hybrid fiber reinforced geopolymer composites from triaxial compressive tests	338-353
Feng, Hu / Sheikh, M. Neaz / Hadi, Muhammad N. S. / Gao, Danying / Zhao, Jun	Mechanical properties of micro-steel fibre reinforced magnesium potassium phosphate cement composite	423-435
Yang, Sungchul / Lim, Yujin	Mechanical strength and drying shrinkage properties of RCA concretes produced from old railway concrete sleepers using by a modified EMV method	499-507
Ashraf, Warda	Microstructure of chemically activated gamma-dicalcium silicate paste	617-627
Moussavi Nadoushani, Zahra S. / Hammad, Ahmed W. A. / Xiao, Jianzhuang / Akbarnezhad, Ali	Minimizing cutting wastes of reinforcing steel bars through optimizing lap splicing within reinforced concrete elements	600-608
Deng, Peng / Zhang, Chao / Pei, Shiling / Jin, Zhibin	Modeling the impact of corrosion on seismic performance of multi-span simply-supported bridges	193-205
Li, M. / Khennane, A. / Brandelet, B. / Ganaoui, M. El / Khelifa, M. / Rogaume, Y.	Modelling of heat transfer through permanent formwork panels exposed to high temperatures	166-174
Hou, Shuang / Zeng, Chuangshuo / Zhang, Haibin / Ou, Jinping	Monitoring interstory drift in buildings under seismic loading using MEMS inclinometers	453-467
Zuo, Yibing / Qian, Zhiwei / Garboczi, Edward J. / Ye, Guang	Numerical simulation of the initial particle parking structure of cement/geopolymer paste and the dissolution of amorphous silica using real-shape particles	206-219
Akcay, Burcu / Tasdemir, Mehmet Ali	Performance evaluation of silica fume and metakaolin with identical finenesses in self compacting and fiber reinforced concretes	436-444
Correal, J. F. / Herrán, C. A. / Carrillo, J. / Reyes, J. C. / Hermida, G.	Performance of hybrid fiber-reinforced concrete for low-rise housing with thin walls	519-529
Zhang, Emma Qingnan / Abbas, Zareen / Tang, Luping	Predicting degradation of the anode–concrete interface for impressed current cathodic protection in concrete	57-68
Yum, Woo Sung / Jeong, Yeonung / Song, Heamin / Oh, Jae Eun	Recycling of limestone fines using Ca(OH) 2 - and Ba(OH) 2 -activated slag systems for eco-friendly concrete brick production	275-284
Gao, Wan-Yang / Hu, Ke-Xu / Dai, Jian-Guo / Dong, Kun / Yu, Ke-Quan / Fang, Li-Jing	Repair of fire-damaged RC slabs with basalt fabric-reinforced shotcrete	79-92
Li, Huang / Farzadnia, Nima / Shi, Caijun	The role of seawater in interaction of slag and silica fume with cement in low water-to-binder ratio pastes at the early age of hydration	508-518
Feng, Deshan / Wang, Xun / Zhang, Bin	Specific evaluation of tunnel lining multi-defects by all-refined GPR simulation method using hybrid algorithm of FETD and FDTD	220-229
Cantero, B. / Sáez del Bosque, I. F. / Matías, A. / Medina, C.	Statistically significant effects of mixed recycled aggregate on the physical-mechanical properties of structural concretes	93-101
Dewey, Justin / Burry, Michael / Tuladhar, Rabin / Sivakugan, Nagaratnam / Pandey, Govinda / Stephenson, Daniel	Strengthening and rehabilitation of deteriorated timber bridge girders	302-309
Zhang, Henian / Shen, Chen / Xi, Peisheng / Chen, Kaixiang / Zhang, Fang	Study on effect of the activated magnesia carbonized building blocks based on the content of fly ash	609-616
Wang, Z. X. / Wang, Y. Q. / Zhang, G. X. / Shi, Y. J.	Tests and parametric analysis of aluminum alloy bolted joints of different material types	589-599
Iucolano, Fabio / Liguori, Barbara / Aprea, Paolo / Caputo, Domenico	Thermo-mechanical behaviour of hemp fibers-reinforced gypsum plasters	256-263
Ouyang, Jian / Han, Baoguo / Chen, Guangzhao / Zhao, Lizhi / Ou, Jinping	A viscosity prediction model for cement paste with nano-SiO 2 particles	293-301

About this
data sheet
IssueID
21508
Published on:
25/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.