0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Study on the Process and Mechanism of Slope Failure Induced by Mining under Open Pit Slope: A Case Study from Yanqianshan Iron Mine, China

Author(s):




Medium: journal article
Language(s): English
Published in: Advances in Civil Engineering, , v. 2019
Page(s): 1-26
DOI: 10.1155/2019/6862936
Abstract:

Mining under an open pit slope results in the collapse and slide of the slope. In this paper, a combination of methods including Google Earth and field investigations is applied to investigate the process of eastern slope failure induced by underground mining in the Yanqianshan Iron Mine over five years. According to the observed ground deformation features, the geomorphic zone of the eastern slope can be divided into four regions (caved rock zone, cracking zone, toppling zone, and sliding zone). Break angles and fracture initiation angles at different times are counted separately. Based on the above work, the process of initiation and development of slope failure is studied. The analysis results show that the process of slope failure could be chronologically divided into three stages. First, a collapse pit, caused by the falling of the overlying strata above the goaf, appeared on the eastern slope. Then, the rock mass around the collapse pit slid into the pit to form a small landslide. Finally, because of mining disturbances and rock creep, a large landslide occurred on the northeastern phyllite slope. The control mechanisms of each failure stage are discussed separately. Finally, the RFPA3D code is employed to simulate the slope failure process under the influence of underground mining. The results are consistent with the field observations, which provided information on deformation failure and the mechanics of the slope that could not be directly observed in the field and deepened the mechanism analysis.

Copyright: © 2019 Yingpeng Hu et al.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10310534
  • Published on:
    18/03/2019
  • Last updated on:
    02/06/2021
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine