Philippe Van Bogaert
- (2023): Comparing cable-supported to archstructures footbridges across historic sites. Presented at: IABSE Symposium: Long Span Bridges, Istanbul, Turkey, 26-28 April 2023.
- (2023): Deformation compatibility during erection of steel bridges: case of a 2-span railway truss bridge. Presented at: IABSE Symposium: Long Span Bridges, Istanbul, Turkey, 26-28 April 2023.
- (2021): Concepts for walkable coverings of historic site. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2018): Buckling of Curved Webs in Steel Box Girders. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (1997): Belgian procedure for the evaluation of existing steel bridges. Presented at: IABSE Workshop: Evaluation of Existing Steel and Composite Bridges, Lausanne, Switzerland, March 1997.
- (1997): Deformation-compatibility of steel truss and high-strength concrete girders. Presented at: International Conference: Composite Construction - Conventional and Innovative, Innsbruck, Austria, 16-18 September 1997.
- (2019): Continuous Prestress in Launched Extradosed Bridges. In: Frontiers in Built Environment, v. 5 (November 2019).
- (2012): Decreasing the hot spot stresses of welded tubular bridge nodes by diaphragm stiffening. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2012): An alternative approach of fatigue life predictions in orthotropic steel bridge decks. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2012): Buckling Resistance of Steel Curved Bridge Girder Webs. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2008): Analytical calculation of internal forces in orthotropic plated bridge decks based on the slope-deflection method. In: Journal of Constructional Steel Research, v. 64, n. 12 (December 2008).
- (2014): Determining the SCFs of tubular bridge joints with an alternative method. In: Journal of Constructional Steel Research, v. 101 (October 2014).
- (2014): Buckling design of steel tied-arch bridges. In: Journal of Constructional Steel Research, v. 103 (December 2014).
- (2014): Buckling Strength of Curved Bridge Girder Web Panels, including Residual Stress. Presented at: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2017): Concrete arch stability by the nominal stiffness method. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2014): Determining Geometric Out-of-Plane Imperfections in Steel Tied-Arch Bridges Using Strain Measurements. In: Journal of Performance of Constructed Facilities (ASCE), v. 28, n. 3 (June 2014).
- (2017): 09.16: Edge clamping effect on the fatigue resistance of an orthotropic steel bridge deck. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 21.11: Asymmetrical cross sections in historic riveted bridges. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 16.09: Influence of arch bridge skewness. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2016): Assessment of the residual stress distribution of a welded stiffener-to-deck plate connection of an orthotropic steel deck using hole-drilling. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2016): Assessment and Repair of a historic brickwork covering of River Scheldt. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2015): Bridges that may have collapsed according to Codes. Presented at: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
- (2011): Approaches for Increasing the Load Carrying Capacity of Historic Bridges. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): Bending of Converging Hangers in Steel Tied Arch Bridges. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2010): Design and Construction of a double-curved railway overpass and 3-track tubular arch. Presented at: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2010): Design methods for buckling of steel tied arch bridges. Presented at: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2008): Autonomous systems for strain and vibration measurements. Presented at: 17th IABSE Congress: Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 17-19 September 2008.
- (2003): Assessment of fatigue strength of steel orthotropic plated bridge decks from continuous measured stress spectra. Presented at: IABSE Symposium: Structures for High-Speed Railway Transportation, Antwerp, Belgium, 27-29 August 2003.
- (2001): Behaviour of train cars moving across steel tied arch bridges. Presented at: ARCH'01. 3ème conférence sur les ponts en arc.
- (2001): Assessment of erection quality of steel tied arch bridges. Presented at: ARCH'01. 3ème conférence sur les ponts en arc.
Structurae cooperates with
