Matthias Pahn 
- (2023): Experimental and analytical evaluation of externally bonded BFRP and CFRP strips on the load-bearing behaviour of reinforced concrete structures using distributed fibre optic sensing. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Analysis of the bond behavior of a GFRP rebar in concrete by in-situ 3D imaging test. In: Materials and Structures, v. 56, n. 9 (11 October 2023).
- (2023): Investigation of the Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry, and Fiber Optic Sensing. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2023): Damage Analysis and Quality Control of Carbon-Reinforced Concrete Beams Based on In Situ Computed Tomography Tests. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2022): Funktionalisierte Faserkunststoffbewehrung zur Wärmespeicherung in Betonbauteilen. In: Beton- und Stahlbetonbau, v. 117, n. 7 (July 2022).
- (2022): Multifunctional building parts to increase the use of solar thermal heat in residential buildings – Mechanisms, saving potentials and application under real conditions. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Auszugtragfähigkeit von dünnen Verbunddübeln als Verbindungsmittel in Stahlbetonwandtafeln. In: Beton- und Stahlbetonbau, v. 117, n. 8 (July 2022).
- (2022): Tensile strength of the bent portion of vinyl ester GFRP rebars. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2022): Influence of Material Stiffness on Bond Behaviour for CFRP and BFRP Strips Glued to Concrete Surface. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2019): Durability of GFRP Bars with Different Bar Diameters. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2019): Fire Tests on the Pre-cast Concrete Sandwich Walls with GFRP Connectors. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2019): Influence of the local bond stress distribution of FRP rebars on the anchorage in concrete. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2019): Pull-Out Capacity of GFRP Connectors in the Edge Area of Precast Concrete Sandwich Walls. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Einfluss von Feuchtigkeit auf die Zug‐ und Biegezugfestigkeit von UHPC. In: Beton- und Stahlbetonbau, v. 115, n. 9 (September 2020).
- (2019): Digital image correlation strain measurement of ultra‐high‐performance concrete‐prisms under static and cyclic bending‐tensile stress. In: Structural Concrete, v. 20, n. 4 (August 2019).
- (2019): Frischbetondruck in Elementwänden mit integriertem Dämmstoff. Ein neuer Ansatz zur realitätsnahen Berechnung im Bauzustand. In: Beton- und Stahlbetonbau, v. 114, n. 1 (January 2019).
- (2019): Effect of Small Concrete Cover on the Fatigue Behavior of GFRP Bars and Concrete Bond. In: Journal of Composites for Construction, v. 23, n. 2 (April 2019).
- (2017): Neuer Ansatz zur Bestimmung des Schubmoduls für einen Dämmstoff. In: Bauphysik, v. 39, n. 4 (August 2017).
- (2018): Thermo-mechanical response of concrete sandwich panels reinforced with glass fiber reinforced polymer bars. In: Structural Concrete, v. 19, n. 3 (June 2018).
- (2014): Beitrag zur Berechnung von Verbundträgern mit elastischem Verbund - Genaue Methode und ein Näherungsverfahren. In: Stahlbau, v. 83, n. 4 (April 2014).
- (2011): Einfluss der Verbundtragwirkung bei mehrschichtigen Stahlbetonwandtafeln mit innen liegender Wärmedämmung. In: Beton- und Stahlbetonbau, v. 106, n. 8 (August 2011).
Structurae cooperates with
