Giorgio Monti 
- (2024): Fragility curves of hollow-core bridge piers for territorial risk studies using closed-form equations. In: Structures, v. 61 (March 2024).
- (2024): Direct displacement-based design of dissipative bracings for seismic retrofit of reinforced concrete buildings. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Experimental characterization and empirical strength prediction of Pakistani brick masonry walls. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Cyclic response of infilled RC frames with window and door openings: Experimental results and damage interpretation. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 1 (28 October 2023).
- (2023): Composite action in Shallow Steel-beam-Concrete Composite decks. In: Engineering Structures, v. 286 (July 2023).
- (2001): Circular RC Sections Confined with FRP: Modeling and Design. Presented at: 2001 Structures Congress and Exposition, Washington, D.C., May 21-23, 2001.
- (2022): Effects of Openings and Axial Load Ratio on the Lateral Capacity of Steel-Fiber-Reinforced Concrete Shear Walls. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2001): Externally bonded FRP reinforcement for RC structures. fédération internationale du béton (fib), Lausanne (Switzerland).
- (2021): Advanced Methods for Structural Rehabilitation. In: Buildings, v. 12, n. 1 (21 December 2021).
- (2021): Energy-based method to design hysteretic bracings for the seismic rehabilitation of low-to-medium rise RC frames. In: Bulletin of Earthquake Engineering, v. 20, n. 1 (November 2021).
- (2021): Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan. In: Buildings, v. 11, n. 7 (30 June 2021).
- (2021): Advanced Multi-Body Modelling of DCCSS Isolators: Geometrical Compatibility and Kinematics. In: Buildings, v. 11, n. 2 (20 January 2021).
- (2020): Design Embedment Strength of Plybamboo Panels Used for GluBam. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (May 2020).
- (2020): Dissipation in sheathing-to-framing connections of light-frame timber shear walls under seismic loads. In: Engineering Structures, v. 208 (April 2020).
- (2016): Effectiveness of design procedures for linear TMD installed on inelastic structures under pulse-like ground motion. In: Earthquakes and Structures, v. 10, n. 1 (January 2016).
- (1999): FRP-Confined Concrete Model. In: Journal of Composites for Construction, v. 3, n. 3 (August 1999).
- (2016): Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface. In: Journal of Composites for Construction, v. 20, n. 5 (October 2016).
- (2001): Design of FRP Jackets for Upgrade of Circular Bridge Piers. In: Journal of Composites for Construction, v. 5, n. 2 (May 2001).
- (2014): Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams. In: Open Journal of Civil Engineering, v. 4, n. 3 ( 2014).
- (2010): Genetic-Algorithm-Based Strategies for Dynamic Identification of Nonlinear Systems with Noise-Corrupted Response. In: Journal of Computing in Civil Engineering, v. 24, n. 2 (March 2010).
- (2016): Evolutionary Polynomial Regression–Based Statistical Determination of the Shear Capacity Equation for Reinforced Concrete Beams without Stirrups. In: Journal of Computing in Civil Engineering, v. 30, n. 1 (January 2016).
- (2009): Design by testing: A procedure for the statistical determination of capacity models. In: Construction and Building Materials, v. 23, n. 4 (April 2009).
- (2016): Analytical thermo-mechanics 3D model of friction pendulum bearings. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 6 (May 2016).
- (2016): Design and Analysis of Cross Vaults Along History. In: International Journal of Architectural Heritage, v. 10, n. 7 (March 2016).
- (2014): Assessment and Improvement of the Seismic Safety of the "Bastione Farnesiano", in the Central Archeological Area of Rome: A Calculation Method Between Need to Preserve and Uncertainties. In: International Journal of Architectural Heritage, v. 11, n. 2 (February 2014).
- (2016): Energy harvesting from electrospun piezoelectric nanofibers for structural health monitoring of a cable-stayed bridge. In: Smart Materials and Structures, v. 25, n. 8 (August 2016).
- (1997): Finite Element for Anchored Bars under Cyclic Load Reversals. In: Journal of Structural Engineering (ASCE), v. 123, n. 5 (May 1997).
- (2009): Bond Model of NSM-FRP Strips in the Context of the Shear Strengthening of RC Beams. In: Journal of Structural Engineering (ASCE), v. 135, n. 6 (June 2009).
- (2011): Comparison of different optimum criteria for sensor placement in lattice towers. In: The Structural Design of Tall and Special Buildings, v. 20, n. 8 (November 2011).
- (2016): Background to the European seismic design provisions for retrofitting RC elements using FRP materials. In: Structural Concrete, v. 17, n. 2 (April 2016).
Structurae cooperates with
