Walter Kaufmann 
- (2024): Corrigendum to “Refined extraction of crack characteristics in large-scale concrete experiments based on digital image correlation” [Eng. Struct. 251 Part A (2022) 113486]. In: Engineering Structures, v. 302 (March 2024).
- (2023): Influence of a triaxial stress state on the load-deformation behaviour of axisymmetrically corroded reinforcing bars. In: Construction and Building Materials, v. 407 (December 2023).
- (2023): Experimental investigation of the shear response of large-scale fibre-reinforced concrete panels. In: Engineering Structures, v. 295 (November 2023).
- (2023): Experimental investigation of bond and crack behaviour of reinforced concrete ties using distributed fibre optical sensing and digital image correlation. In: Engineering Structures, v. 292 (October 2023).
- (2023): Experimental exploration of digitally fabricated connections for structural concrete. In: Engineering Structures, v. 285 (June 2023).
- (2023): Experimental and analytical assessment of fatigue damage in reinforced concrete tension members. In: Engineering Structures, v. 289 (August 2023).
- (2020): From Smart Dynamic Casting to a growing family of Digital Casting Systems. In: Cement and Concrete Research, v. 134 (August 2020).
- (2023): Discontinuous yielding in bare and embedded reinforcing bars: Implications on the determination of steel and bond shear stresses from strain measurements. In: Engineering Structures, v. 278 (March 2023).
- (2023): Digitally fabricated weak interfaces to reduce minimum reinforcement in concrete structures. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction. In: RILEM Technical Letters, v. 7 (August 2022).
- (2023): Assessment of parameters influencing the behavior of statically indeterminate reinforced concrete slabs and beams under fire conditions. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Direction-dependent behaviour and size effect of steel fibre reinforced concrete based on the double punch test. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): Influence of short glass fibres and spatial features on the mechanical behaviour of weft-knitted textile reinforced concrete elements in bending. In: Construction and Building Materials, v. 344 (August 2022).
- : Diseño, Construcción y Capacidades del Large Universal Shell Element Tester. In: Hormigón y acero.
- (2021): Influence of quasi-static strain rate on the stress-strain characteristics of modern reinforcing bars. In: Construction and Building Materials, v. 287 (June 2021).
- (2021): Influence of cross section loss on the stress-strain characteristics of corroded quenched and self-tempered reinforcing bars. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Kirchhoff–Love Plate Deformations Reinterpreted. In: Journal of Engineering Mechanics (ASCE), v. 148, n. 6 (June 2022).
- (2022): Analysis of the tension chord in the flexural response of concrete elements: Methodology and application to weft-knitted textile reinforcement. In: Engineering Structures, v. 261 (June 2022).
- (2022): Effective reinforcement ratio of RC beams: Validation of modelling assumptions with high‐resolution strain data. In: Structural Concrete, v. 23, n. 3 (May 2022).
- (2022): Corroded Tension Chord Model: Load‐deformation behavior of structures with locally corroded reinforcement. In: Structural Concrete, v. 23, n. 1 (January 2022).
- (2009): "Ce qui est exigé doit être rémunéré en conséquence!". In: Tracés, v. 135, n. 13-14 (22 July 2009).
- (2020): Automated crack detection and measurement based on digital image correlation. In: Construction and Building Materials, v. 256 (September 2020).
- (2019): Compression Field Analysis of Fiber-Reinforced Concrete Based on Cracked Membrane Model. In: ACI Structural Journal, v. 116, n. 5 (September 2019).
- (2018): Effect of the boundary conditions on the Australian uniaxial tension test for softening steel fibre reinforced concrete. In: Construction and Building Materials, v. 184 (September 2018).
- (2020): Cracked Membrane Model with Fixed, Interlocked Cracks: Numerical Implementation and Validation. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (February 2020).
- (2020): Behavior of fiber reinforced concrete members under sustained axial/flexural load. In: Structural Concrete, v. 21, n. 4 (August 2020).
- (2017): Instantaneous deflection calculation for steel fibre reinforced concrete one way members. In: Engineering Structures, v. 131 (January 2017).
- (2016): Effect of transverse bending moments on the shear resistance of concrete bridges. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2015): Conceptual Bridge Design beyond Signature Structures. Presented at: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
Structurae cooperates with
