Daniel Castro-Fresno 
- (2024): An end-to-end computer vision system based on deep learning for pavement distress detection and quantification. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Development of improved porous asphalt mixtures with high porosity levels. In: Developments in the Built Environment, v. 16 (December 2023).
- (2024): Improving detection of asphalt distresses with deep learning-based diffusion model for intelligent road maintenance. In: Developments in the Built Environment, v. 17 (March 2024).
- (2023): Artificial reefs built by 3D printing: Systematisation in the design, material selection and fabrication. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Experimental evaluation and recyclability potential of asphalt concrete mixtures with polyacrylonitrile fibers. In: Construction and Building Materials, v. 317 (January 2022).
- (2022): Evaluation of the rejuvenation of asphalt by means of oil-saturated porous aggregates. In: Construction and Building Materials, v. 318 (February 2022).
- (2021): Critical assessment of new polymer-modified bitumen for porous asphalt mixtures. In: Construction and Building Materials, v. 307 (November 2021).
- (2019): Design of a new energy dissipating device and verification for use in rockfall protection barriers. In: Engineering Structures, v. 199 (November 2019).
- (2018): Energy harvesting from vehicular traffic over speed bumps: a review. In: Proceedings of the Institution of Civil Engineers - Energy, v. 171, n. 2 (May 2018).
- (2020): Fatigue behaviour of adhesive bonds in tensile CFRP-metal double-strap joints with puddle iron plates taken from a 19th century bridge. In: Composite Structures, v. 251 (November 2020).
- (2020): Influence of carbon fibre stiffness and adhesive ductility on CFRP-steel adhesive joints with short bond lengths. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): An integrated DoE – Stochastic multi criteria decision-making analysis applied for experimental evaluation of fiber reinforced porous asphalt mixtures. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): An experimental laboratory study of fiber-reinforced asphalt mortars with polyolefin-aramid and polyacrylonitrile fibers. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Fluid transport within permeable pavement systems: A review of evaporation processes, moisture loss measurement and the current state of knowledge. In: Construction and Building Materials, v. 243 (May 2020).
- (2020): Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers. In: Construction and Building Materials, v. 234 (February 2020).
- (2013): Experimental Study of Bituminous Mastic Behaviour Using Different Fillers Based on the Ucl Method. In: Journal of Civil Engineering and Management, v. 19, n. 2 (April 2013).
- (2011): Classification and Comparison of Snow Fences for the Protection of Transport Infrastructures. In: Journal of Cold Regions Engineering, v. 25, n. 4 (December 2011).
- (2019): Assessment of carbon black modified binder in a sustainable asphalt concrete mixture. In: Construction and Building Materials, v. 211 (June 2019).
- (2012): Effect of Type of Compaction on Mechanical Properties in Warm-Mix Asphalts. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 8 (August 2012).
- (2011): Energy consumption during compaction with a Gyratory Intensive Compactor Tester. Estimation models. In: Construction and Building Materials, v. 25, n. 2 (February 2011).
- (2011): Evaluation of compactability and mechanical properties of bituminous mixes with warm additives. In: Construction and Building Materials, v. 25, n. 5 (May 2011).
- (2012): Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers. In: Construction and Building Materials, v. 28 (March 2012).
- (2012): Evaluation of water effect on bituminous mastics with different contribution fillers and binders. In: Construction and Building Materials, v. 29 (April 2012).
- (2013): Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Freeze–thaw durability of cement-based geothermal grouting materials. In: Construction and Building Materials, v. 55 (March 2014).
- (2015): Evaluation of reflective cracking in pavements using a new procedure that combine loads with different frequencies. In: Construction and Building Materials, v. 75 (January 2015).
- (2016): Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste. In: Construction and Building Materials, v. 112 (June 2016).
- (2017): Analysis of the skid resistance and adherence between layers of asphalt concretes modified by dry way with polymeric waste. In: Construction and Building Materials, v. 133 (February 2017).
- (2014): Bridge–structure interaction analysis of a new bidirectional and continuous launching bridge mechanism. In: Engineering Structures, v. 59 (February 2014).
- (2011): Effects of aggregate shape and size and surfactants on the resilient modulus of bituminous mixes. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 38, n. 8 (August 2011).
Structurae cooperates with
