0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Mufti, Aftab / Bakht, Baidar / Horosko, Andrew: Enhancing the capacity evaluation of Canadian bridges with structural monitoring data. In: Proceedings of the Institution of Civil Engineers - Bridge Engineering.

    https://doi.org/10.1680/jbren.21.00051

  2. Bakht, Baidar / Csagoly, Paul F. (1980): Diagnostic Testing of a Bridge. In: Journal of the Structural Division (ASCE), v. 106, n. 7 (July 1980).

    https://doi.org/10.1061/jsdeag.0005472

  3. Bakht, Baidar / Jaeger, Leslie G. / Cheung, Mo S. (1981): Cellular and Voided Slab Bridges. In: Journal of the Structural Division (ASCE), v. 107, n. 9 (September 1981).

    https://doi.org/10.1061/jsdeag.0005783

  4. Jaeger, Leslie G. / Bakht, Baidar (1993): Analytical and observed responses of steel girder bridges. Presented at: IABSE Colloquium: Remaining Structural Capacity, Copenhagen, Denmark, 1993.

    https://doi.org/10.5169/seals-51384

  5. Mufti, Aftab / Raeisi, Farnaz / Khalid, Huma / Horosko, Andy / Bakht, Baidar (2021): A Case for Adding an Inspection Level Related to SHM for Bridge Evaluation. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 48, n. 4 (April 2021).

    https://doi.org/10.1139/cjce-2019-0703

  6. Bakht, Baidar / Al-Bazi, George / Banthia, Nemy / Cheung, Moe / Erki, Marie-Anne / Faoro, Martin / Machida, Atsuhiko / Mufti, Aftab A. / Neale, Kenneth W. / Tadros, Gamil (2000): Canadian Bridge Design Code Provisions for Fiber-Reinforced Structures. In: Journal of Composites for Construction, v. 4, n. 1 (February 2000).

    https://doi.org/10.1061/(asce)1090-0268(2000)4:1(3)

  7. Hay, Shaun / Thiessen, Kenton / Svecova, Dagmar / Bakht, Baidar (2006): Effectiveness of GFRP Sheets for Shear Strengthening of Timber. In: Journal of Composites for Construction, v. 10, n. 6 (December 2006).

    https://doi.org/10.1061/(asce)1090-0268(2006)10:6(483)

  8. Bakht, Baidar (1988): Analysis of Some Skew Bridges as Right Bridges. In: Journal of Structural Engineering (ASCE), v. 114, n. 10 (October 1988).

    https://doi.org/10.1061/(asce)0733-9445(1988)114:10(2307)

  9. Bakht, Baidar / Jaeger, Leslie G. (1988): Bearing Restraint in Slab‐on‐Girder Bridges. In: Journal of Structural Engineering (ASCE), v. 114, n. 12 (December 1988).

    https://doi.org/10.1061/(asce)0733-9445(1988)114:12(2724)

  10. Bakht, Baidar / Jaeger, Leslie G. (1990): Bridge Evaluation for Multipresence of Vehicles. In: Journal of Structural Engineering (ASCE), v. 116, n. 3 (March 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:3(603)

  11. Bakht, Baidar / Jaeger, Leslie G. (1990): Bridge Testing—A Surprise Every Time. In: Journal of Structural Engineering (ASCE), v. 116, n. 5 (May 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:5(1370)

  12. Cheung, M. S. / Bakht, Baidar / Jaeger, Leslie G. (1982): Analysis of box-girder bridges by grillage and orthotropic plate methods. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 9, n. 4 (December 1982).

    https://doi.org/10.1139/l82-069

  13. Bakht, Baidar / Jaeger, Leslie G. (1983): Bridge aesthetics. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 10, n. 3 (September 1983).

    https://doi.org/10.1139/l83-068

  14. Bakht, Baidar / Jaeger, Leslie G. (1983): Effect of vehicle eccentricity on longitudinal moments in bridges. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 10, n. 4 (December 1983).

    https://doi.org/10.1139/l83-088

  15. Bakht, Baidar / Cheung, M. S. / Aziz, T. S. (1979): Application of a simplified method of calculating longitudinal moments to the Ontario highway bridge design code. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 6, n. 1 (March 1979).

    https://doi.org/10.1139/l79-005

  16. Bakht, Baidar / Csagoly, Paul F. / Jaeger, Leslie G. (1979): Effect of computers on economy of bridge design. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 6, n. 3 (September 1979).

    https://doi.org/10.1139/l79-056

  17. Khanna, O. Shervan / Mufti, Aftab A. / Bakht, Baidar (2000): Experimental investigation of the role of reinforcement in the strength of concrete deck slabs. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 27, n. 3 (June 2000).

    https://doi.org/10.1139/l99-094

  18. Jaeger, Leslie G. / Bakht, Baidar (1985): Bridge analysis by the semicontinuum method. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 12, n. 3 (September 1985).

    https://doi.org/10.1139/l85-065

  19. Bakht, Baidar / Jaeger, Leslie G. (1987): Behaviour and evaluation of pin-connected steel truss bridges. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 3 (June 1987).

    https://doi.org/10.1139/l87-052

  20. Bakht, Baidar / Jaeger, Leslie G. (1988): Dealing with varying moments of inertia of girders in bridge analysis. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 2 (April 1988).

    https://doi.org/10.1139/l88-031

  21. Jaeger, Leslie G. / Bakht, Baidar (1988): Effect of Poisson's ratio and beam spacing on grillage analysis of slab bridges. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 5 (October 1988).

    https://doi.org/10.1139/l88-107

  22. Jaeger, Leslie G. / Bakht, Baidar (1990): Effect of butt joints on the flexural stiffness of laminated timber bridges. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 17, n. 5 (October 1990).

    https://doi.org/10.1139/l90-096

  23. Mufti, Aftab A. / Jaeger, Leslie G. / Bakht, Baidar / Wegner, Leon D. (1993): Experimental investigation of fibre-reinforced concrete deck slabs without internal steel reinforcement. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 3 (June 1993).

    https://doi.org/10.1139/l93-055

  24. Bakht, Baidar / Agarwal, Akhilesh C. (1995): Deck slabs of skew girder bridges. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 3 (June 1995).

    https://doi.org/10.1139/l95-060

  25. Mufti, Aftab A. / Bakht, Baidar / Svecova, Dagmar / Limaye, Vidyadhar (2004): Failure tests on full-scale models of grout laminated wood decks. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 31, n. 1 (January 2004).

    https://doi.org/10.1139/l03-088

  26. Bakht, Baidar / Lam, Clifford (2000): Behavior of Transverse Confining Systems for Steel-Free Deck Slabs. In: Journal of Bridge Engineering (ASCE), v. 5, n. 2 (May 2000).

    https://doi.org/10.1061/(asce)1084-0702(2000)5:2(139)

  27. Jaeger, Leslie G. / Bakht, Baidar / Tadros, Gamil: Equivalent area of voided slabs. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 4.

    https://doi.org/10.1139/l98-002

  28. Helmi, Karim / Bakht, Baidar / Mufti, Aftab (2014): Accurate measurements of gross vehicle weight through bridge weigh-in-motion: a case study. In: Journal of Civil Structural Health Monitoring, v. 4, n. 3 (May 2014).

    https://doi.org/10.1007/s13349-014-0076-5

  29. Bakht, Baidar / Mufti, Aftab (2018): Evaluation of one hundred and one instrumented bridges suggests a new level of inspection should be established in the bridge design codes. In: Journal of Civil Structural Health Monitoring, v. 8, n. 1 (January 2018).

    https://doi.org/10.1007/s13349-017-0256-1

  30. Mufti, Aftab A. / Bakht, Baidar / Jaeger, Leslie G.: Bridge superstructures. New developments. National Book Foundation, Islamabad (Pakistan).
Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine