0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

High Voltage Masts to Cadiz Island

General Information

Beginning of works: 1957
Completion: 1960
Status: in use

Project Type

Location

Location: , , ,
Coordinates: 36° 30' 29.97" N    6° 15' 44.13" W
Coordinates: 36° 31' 7.59" N    6° 14' 56.82" W
Show coordinates on a map

Technical Information

Dimensions

diameter 6 - 20.70 m
height 158 m
diameter at base 20.70 m
number of towers 2
foundations diameter 27.00 m
traverse width 71.00 m

Materials

tower steel
foundations reinforced concrete

Excerpt from Wikipedia

The Pylons of Cádiz, also known as the Towers of Cádiz, are two tall pylons supporting a double-circuit 132 kV three-phase AC powerline over the bay of Cádiz, Spain starting at Puerto Real Substation[Location 1] to the substation of the former Cadiz Thermal Power Station situated on the peninsula upon which the city of Cádiz stands.[Location 2]

Description

The crossing consists of 16 pylons: two suspension pylons, both 158 metres tall, that carry the line over the Bay of Cádiz, two strainer portals built of concrete and at each strainer portal a group of 6 monopolar strainers, which are used to carry the conductors from the strainer portal to the first standard line tower (at the northern end of the span) respectively to the switchyard of Cadiz Substation (at the southern end of the span).

The strainer portal at the southern end is situated close to Cadiz Substation,[Location 3] that of the northern end at Matagorda.[Location 4] Both strainer portals are including their upper mentioned monopolar strainers fenced-in.

The huge suspension towers are situated in Cádiz near Fort Puntales and the Puntales Naval Station[Location 5] and at Matagorda quarter near the commercial wharves.[Location 6]

The rest of the line consists of pylons with 3 crossbars carrying 6 conductors. An interesting feature is, that the powerline crossing does not use a ground conductor in the span section despite its great height.[ clarification needed]

Design and construction

The huge suspension towers, which are of very unconventional design, were conceived and designed by the Italian engineer, Alberto Toscano.

Each is a hollow mast resembling a truncated cone (or frustum). The diameter of the frustum decreases from 20.7 metres at the base to six metres at the top. The towers, which rest on reinforced concrete plinths carry on their pinnacle a single crossbar with rhomboid profile, on which the insulators carrying the conductors are fixed. A helical staircase winds its way up the interior of the structure to the top.

This unconventional mode of construction was chosen because Spanish steel mills were unable to produce massive steel carriers at the time, and importing such carriers was impossible in Francoist Spain.

The construction was carried out under the supervision and direction of Remo Scalla, a close friend of Alberto M. Toscano. The same team of Toscano, the designer, and Scalla, the builder, also joined forces in building the structures supporting the lines that span the Strait of Messina, between Calabria, on the mainland of Italy, and the island of Sicily. The Cádiz project started during the latter part of 1957 and concluded in 1960. Upon completion, the towers were acquired by the Spanish National Institute of Industry.

Text imported from Wikipedia article "Pylons of Cádiz" and modified on July 22, 2019 according to the CC-BY-SA 4.0 International license.

Participants

(role unknown)

Relevant Web Sites

Relevant Publications

  • About this
    data sheet
  • Structure-ID
    20000287
  • Published on:
    21/05/1999
  • Last updated on:
    05/09/2023
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine